Earthmoving Machine Dealers in Midc, Mumbai (38 products available)

• Blade Capacity: 3.17 - 4.27 m3
• Operating Weight: 16, 500 - 20, 000 kg
• Travel Speed: 11.00 km/h
• Engine Output: 120 kW / 163 HP (ISO 9249), 120 kW / 161 HP (SAE J1349)
• Emission Stage: IV
• Brand Name: Liebherr

Cashew kernel grader- grade size: 180, 210, 240, 320, half’s, splits production capacity - 1. 100 kg hour 2. 150 kg hour 3. 200 kg hour 4. 300kg hour

• Size: 10
• Type: 10
• Model Number: 10
• Brand Name: 10
• Material: 10

TecknoSIM Excavator Solutions.

We are offering heavy duty book stitching machine. specifications modeld-6132 size1-1/4"(32 mm) stitching details32 mm (1-1/4") book stitcher stitching capacityupto 32 mm (1-1/4") stabbing capacityupto 57 mm (2-1/4") stitching thickness1 page to 800 pages. Maximum speed280 rpm (140 stitches per minute) wire imperial standard wire gauge round and narrow flat 21/24 gauge, 19/21 gauge, 18/19 gauge power required -1/2 hp.

Every item in our range is manufactured utilizing premium supplies sourced from renowned traders. Therefore, our products are reliable. Stringent quality checks have been employed upon the raw materials which we source. For this, we have hired special quality analysts who check the materials against different parameters.   Features: Efficiency Accurate functioning High strength Reliability Durable nature

• Driven Type: Simulator
• Color: Blue
• Automatic Grade: Manual, Automatic
• Displacement Power: 2000-3000cc
• Certification: ISO 9001:2008 Certified

TecknoSIM Excavator Operator Training Simulator is fully functional simulator for training new and experienced operators in a risk-free environment. It is a realistic replica of a actual equipment with accurate dynamics that provides the trainees a safe environment to refine their skills as well as improve their productivity & efficiency. Excavator Simulator enables training on a range of scenarios that allows operators to practice safely on mining operations as well as potentially life-threatening emergency scenarios. New operators learn to operate a shovel safely on a simulator before operating the real equipment whereas experienced operators get a chance to further improve their skills. TecknoSIM simulators are versatile and scalable to every training need and budget. The comprehensive training tools inbuilt in the simulator provides the most updated skills required.

• Brand Name: BHARAT
• Voltage: 440V/380V
• Port: NHAVA SHEVA
• Power(W): NA
• Packaging Details: EACH PIECE IS PACKED IN POLY BAG AND WOODEN CASE
• Condition: New
• Weight: NA
• Model Number: NA
• Max. Swing Diameter: 2000MM
• Dimension(L*W*H): NA
• After-Sales Service Provided: No overseas service provided
• Certification: NA

• Driven Type: Hydraulic
• Application: Construction Use
• Feature: Increase Productivity, Reduces Operating Costs

Heavy Duty Die Cutting Machine, offered by us, is ideal for diverse printing units. It is perfect to be used for cutting & embossing of paper, solid board, corrugated board, micro flute, plastic, rubber, linoleum, leather, etc. We make available Die Cutting Machine in diverse technical so as to cater to variegated demands of the buyers. One can obtain Die Cutting Machine from us at a very reasonable price.   Features: High performance Easy installation Precision engineering Longer service life

• Condition: Used
• Automatic Grade: Hydraulic
• Power: 300-500bhp
• Load Capacity: 600
• Warranty: 5years
• Country of Origin: India
• Brand Name: Halco
• Span: 2
• After-Sales Service Provided: 5
• Max. Lifting Height: 200

• Voltage: 415 v
• Power: 7.5 hp
• Model: Sc 7507
•  :  
• Motor on/off: Control Panel
• Feed width (mm): 750 mm
• Shred size: 10/25/50(mm)
• Shred capacity: (70 gsm A 4 sheets) 60 sheets
• Speed (meters / minutes): 8 meters/min
• Weight (kgs): 850 kg (Approx)
• Machines dimensions (mm): ( L x W x H) 1100 x 500 x 1200mm

The machine has a special design for overburden excavation as it is the case in the Drmno coal (lignite) mine in Serbia. The excavator serves as the key member of an overburden system including four conveyors and a spreader in the waste dump area. The bucket wheel head consisting of a 2 x 670 kW bucket wheel gearbox, a single-web bucket wheel, a bucket wheel shaft and a dual diaphragm support was entirely manufactured in the TAKRAF Lauchhammer workshop.

This Heavy Duty Robust Machne Is Specially Designed For Production Of Two Ply Corrugated (Roll) By Feeding Two Reels Of Craft Paper One As Media Paper And Other As Liner Paper Simultaneously. This Versatile Machine Has Two Sets Of Flute Rollers Which Can Be Alternatively Used. Changing Of Flute Rollers Is Hydraulically And Takes No Time. Flute Rollers Are Mounted On Spherical Bearings. The Machine Is Equipped With Hydraulic Power Pack Reel Stand Upto 1mtr Reel Diameter, Fingerless System Shall Optionaly Be Attached With The Machine.

• Features: No moving parts Separates heavy parts from the tuft flow and conveys them into a waste container.
• Technical Details: Production: up to 900 kg/hr Raw material: cotton

Protecting the installation from heavy parts is of particular importance during waste processing. Hence it is absolutely necessary to provide a heavy part separator, such as the SP-H. A special fan speed control allows the heavy part separator to reach an optimal efficiency level at minimal good fiber loss. The heavy parts are automatically extracted and fed into a waste container under constant working conditions.

CONSTRUCTION of Heavy Duty Rotogravure Printing Machine: Moulded CI frames of total thickness of 70 mm  with wall thickness of 25 mm duly machined to close tolerances inter connected by cross beam & tie rods for vibration free performance consists of printing cylinder shaft, impression roll, compensating roll, idlers, doctor knife, unit dryers, ink pan, drying unit etc. UNWIND: This unit consists of ball bearing assembly to accommodate a shaft with tapered reel cones to accept standard cores.  Arrangement for lateral displacement with mechanical clutch are provided at such points at operators ease.  Sufficient idle rollers are provided to ensure perfect web tension. PRINTING UNIT: It consists of cylinder unit, impression rollers and doctor blade unit which are easily removable for changing, working and for making ready. Doctor blade holder are easily removable for sharpening and replacing blades. Oscillating doctors knife’s position and angle is adjustable according to the dia. of printing cylinders. Fitted on low friction gun metal bushing with mechanical oscillation off the gear box drive All units of blades are equipped with devices for oscillation and change of angles of blade to suit dia of cylinders. Pneumatically operated Rubberized impression cylinder is precision ground and are free on bearing to give perfect impression, which can be engaged or disengaged from operating side after presetting. Each station has its own individual body mounted control panels for monitoring registration, blower heater control, rubber roll movement and emergency stops.

• YELLOW: GENERATORS
• FEET: 123

We are Dealing in jcb road Rollers dumpers excavators jcb generators-- 50 Kva to 10000 Kva

• Max. Straight Line Cut: 2300mm in length

Ostrich 2000 is a Professional , Tough and Durable Profile Cutting Machine . This non tiring machine has to be foundation mounted and can be used in multiple shifts for large Production Application. A Magnetic Racing Roller which moves around a Tin Sheet Template makes the cutting Torch cut the exact shape with perfect accuracy. Ostrich 2000 can cut Mild Steel and Low Alloy Carbon Steel with Oxy Fuel the Machine can also be used for Plasma Application to cut Stainless Steel and Aluminium. The Machine can cut from 5mm to 250mm Plate thickness with Oxy Fuel and Plasma thickness depends on Power Source. The Machine can cut any complex shapes like Flanges , Stars , Hooks , Elipse , Triangles or even Circles , Squares , Rectangles and even Staright Lines.

Mini front end loader, portable diesel air compressor, diesel air compressor

The mahindra earth master is a next generation backhoe loader breakfree with revolutionary technology.the mahindra earth master is an outcome of 36 months of development and is loaded with technology not hitherto seen in this product segment in India. With earthmaster, we are ushering in a new era of performance, comfort and ease of operation in backhoe loaders the mahindra earth master has undergone over 20,000 hours of rigorous testing in the harshest of terrains and for the toughest of applications. It has been validated on all performance, safety and reliability parameters. It is backed by mahindra's dealer network, which has an unparalleled reach across the country.

heavy duty machining, Gears, splines, Sprockets, Worm Wheel, Worms

Band Sealer Heavy Duty Machines, Linear Counter Pressure Filler

Crawler Cranes, container cranes, Jib Crane, Anode Stacker Cranes

Boring Machine, Lathe Machine -HMT, Light Duty Lathe Machine

earth moving construction machinery, Massey Ferguson Tractor Spare Parts

1121 Sella Rice, logistic agent, labour management services, Leather Jackets

Heavy Duty Sealing Machine, Tube Sealing Machine, Nitrogen Packing Machine.

Wood Turning Lathe, Pillar Fly Press, Bench Vice, abrasive belt grinder

wheel dozers, Wiring Accessories, Voltage And Frequency Relays