Electric Cutting Tools Dealers in Fort, Mumbai (33 products available)

Gross Weight : 56 Kgs

Max. Thickness : : 80mm

Specification :  : R3-R10 Seven Knife

Working Rate : : 56 Times/Minute

Motor Frequency : : 180W

Motor Speed : : 1400 rpm

Net Weight :  : 46 Kgs

Dimension :   : 520*350*650mm

WH-08 Electric Corner Cutter  

Voltage : 220 V

Model No. : AMI-3

Maximum shearing capacity : 3 mm (1/8")

Number of shear strokes at max. load : 900 per min.

Number of shear strokes unloaded : 1000 per min.

Shearing/cutting speed : 2 Mtr. per Min.

Nominal input : 550 watts.

Weight (Approx.) : 6.8 Kgs.

The portable electric shear model 'AMI-3' is very useful and an indispensable tool in all workshops, assembly line, erection sites, coach building shops, tin smith and alike industries as it is handy, convenient and easily accessible to different types of shearing jobs in various materials upto 3 mm thickness (in M.S. with tensil strength 45kg sqr. mm.) for straight, round, ovel, curved and/or irregular shapes at rapid speed reducing thereby the production and maintanance cost considerably.A moving cutter moves against a stationary one in the anvil. The cutting speed is high and there is no loss of material. While a shear can be used for splitting sheets where the resistance to bending is not great, they are not recommended for cutting across wide and thick plates. On heavier gauges of material they should be regarded as trimming shears, main portion remaining flat; while the cut portion is bent away beneath the anvil. The anvil is designed so that scribed lines are well in view and are easily followed allowing straight lines and curves to be easily cut. The minimum cutting radius is approximately 3.1/2lnch. Blades are of special die steel and are of simple design. They are of sufficient length to stand fro 10 to 15 grindings. The motor is for intermitent operation and is of fan cooled type, suitable for operation on AC. 220 volts, single phase, 50 cycles with built-in "ON" "OFF" Switch, 2 meter long cable and plug. Extra accessories: Spare blade Carbon brush

Voltage : 220 V

Model No. : AMI-3

Maximum shearing capacity : 3 mm (1/8")

Number of shear strokes at max. load : 900 per min.

Number of shear strokes unloaded : 1000 per min.

Shearing/cutting speed : 2 Mtr. per Min.

Nominal input : 550 watts.

Weight (Approx.) : 6.8 Kgs.

The portable electric shear model 'AMI-3' is very useful and an indispensable tool in all workshops, assembly line, erection sites, coach building shops, tin smith and alike industries as it is handy, convenient and easily accessible to different types of shearing jobs in various materials upto 3 mm thickness (in M.S. with tensil strength 45kg sqr. mm.) for straight, round, ovel, curved and/or irregular shapes at rapid speed reducing thereby the production and maintanance cost considerably. A moving cutter moves against a stationary one in the anvil. The cutting speed is high and there is no loss of material. While a shear can be used for splitting sheets where the resistance to bending is not great, they are not recommended for cutting across wide and thick plates. On heavier gauges of material they should be regarded as trimming shears, main portion remaining flat; while the cut portion is bent away beneath the anvil.   The anvil is designed so that scribed lines are well in view and are easily followed allowing straight lines and curves to be easily cut. The minimum cutting radius is approximately 3.1/2lnch. Blades are of special die steel and are of simple design. They are of sufficient length to stand fro 10 to 15 grindings. The motor is for intermitent operation and is of fan cooled type, suitable for operation on AC. 220 volts, single phase, 50 cycles with built-in "ON" "OFF" Switch, 2 meter long cable and plug. Extra accessories: Spare blade Carbon brush

Production Capacity : 45000-50000cards

We hold an expertise in offering Electric Card Cutter. These products are widely appreciated across the globe for their durability, highstrength and finefinish. Our expert professionals ensure our product's accordance with the international quality standards. Our range finds application in daily use .Electric Card Cutter is one of the new model in card cutters. You can operate Electirc Card Cutter easily,it is operated with the button which looks like mouse of computer.The stranded size of Eletric card Cutter is 54mmX86mm.and there are one more good news for clients that if you want to change the die you can do it easily.

Cutting Disc Size : 4 inch

No Load Speed : 5.200 rpm

Rated input power : 1,400 W

Saw blade bore diameter : 184 mm

Weight : 4.1 kg

Brand : Bosch

Size of Trolley: 7' x 3' (Standard) Maximum Capacity to cut marble granite size: 8' x 4' Rail: 15' Long, 2 numbers (one 'V' type and one 'Square' Type) Minimum Water Requirement: 15 Liters per Minute Spindle Vertical Movement: 540 mm Spindle Horizontal Movement: 500 mm Spindle Angular Adjustment from vertical: 45o on either side Cutter Speed: 2800 rpm (Depends on the disc diameter and material to be sawed. It is recommended that you give us that information at the time of placing order) Motor: 7.5 HP or 10 HP

No Load Speed : 12000rpm

Rated Input Power : 1200W

Rated voltage : 220-240V

Rated frequency : 50Hz

Capacity : 110mm

Net weight : 2.8kg

Marble Cutter Machine 4” Round Body : Green

1958 : 1

Fibre and Casting Material.

No Load Speed : 12000 r/min

Rated Voltage : 230 V

Rated Frequency : 50 Hz

Rated Input Power : 1200 W

Blade dia : 110 mm

Warranty : 3 months

Voltage : 220 V

Power : 1260 Watts

Weight : 3.15 kg

Disc Diameter  : 125 mm

Frequency Hz : 50 Hz

Motor Speed  : 12600 Rpm

Voltage : 235V

Speed : 12600 RPM

Cord Length : 110 mm

Watts Input : 1260 Watts (full Load)

Approx Net Weight : 3.15 kg

We are the leading supplier of this products.

Cutting Disc Size : 34mm

Warranty : 6 months

Brand Name : Ralli Wolf

Voltage : 235

Country of Origin : Made in India

Type Of Power Tool : Cutter

Usage/Application : Industrial

Color : Brown, Grey, Silver, White, Yellow

Feature : Auto Cut, Durable, Easy To Use, Eco Friendly, Heat Resistant, High Strength, Rust Proof, Sharpness

Voltage : 110V, 220V, 380V, 440V

Condition : New, Used

Automatic Grade : Automatic, Manual, Semi Automatic

Power : 1-2kw, 10-12kw, 2-4kw, 4-6kw, 6-8kw, 8-10kw

Driven Type : Electric

Warranty : 1Year, 2Year, 3Year

Warranty : 6 Months

Weight : 1.6 kg

Features : Long service life, Immaculate finish, Simple design, High efficiency, Enhanced durability, Crack resistance.

Brand : Hitachi

Model Number : Cn 16sa

Type : Power Tools

Cutting Capacity In Steel : 1.6mm

Applications : Precision Cutting

Power : 400 W

Rpm : 2300 rpm