Electronic Test Instruments Dealers in Marol, Mumbai (109 products available)

• 220V±10%, AC 50 Hz (120V±10% against order): 0to1999.9 µ
• 0.1 µ: 100A DC (MRL-11) 100-200A (MRL-22)
• 0.5 class: LCD
• Stores 100 test results: Built in printer
• <40º C. < 85% R.H.: Bag Mains cord. Flexible testing cable set with alligator clamps, 8 meter long. Operating Manual. Calibration certificate.
• MRL-11 37(L)x26.5(W)x22.5(H) cm: 37(L) x 28(W) x 12.5(H) cm
• MRL-11: 6 kg: 5 kg
• MRL-22: 37(L)x26.5(W)x22.5(H) cm: 37(L) x 28(W) x 12.5(H) cm
• MRL-22: 6 kg.: 5 kg

• Input: Powered from Battery Under Test

Battery capacity" is a measure of the charge stored by the battery, and is determined by the mass of active material contained in the battery. The Amp Hour (AH) specification provides a measurement of battery capacity.The battery capacity represents the maximum amount of energy that can be extracted from the battery under certain specified conditions. So how many amp-hours of capacity does your battery really have? Find out with Battery Capacity Tester. These tests are helpful for relative comparisons and battery analysis. In this method a fully charged battery is discharged with a constant current up to the voltage level below which battery is considered as fully discharged. In this test user needs to set parameters like Battery cutoff Voltage and a test current. Current setting is dependant on expected rate of discharge. At the end of test, machine gives you the reading of exact Ah capacity extracted from the battery.

• Type: Digital Temperature Recorder
• Material: Stainless Steel
• Product Customisation: Yes
• Use: Industrial. It is used extensively especially in critical preheat applications, stress relieving and in many other applications. 
• Features: Impeccable finish, Precise reading, Offered at reasonable rates.

• Resolution: 1 Kilo maxwell turn
• Brand Name: Lab Magnet
• Accuracy: +0.5%
• Output: 1 Volt d.c. across 1 Kilo Ohms.
• Drift: + 1% per minute,maximum.
• Input Resistance: 100 x Scale factor Ohms
• Input Power: 240 V, 50 Hz, and 25 VA
• Model No: FM 110
• Indication: 3.5 digit panel meter with 12 mm LED

• Application: Laboratory, Industrial
• Brand Name: Caltech
• Model Name/Number: CES-501
• Weight: 320 Gms
• Accuracy: 1.50%

In today's world of cutthroat competition and market dive economy, on one hand there are rising energy cost and on the other is an urgent need to be "globally competitive", not only to grow but even to survive. Further there is need to comply with the new energy conservation law 2001, making energy audits mandatory. Smart analyser (multi parameter meter software) idealsoft solutions brings to you yet another tool smart analyser, to enhance your energy conservation and utility management efforts.

• Rated Power: Electronic
• Model Number: IRD306
• Battery: 9V
• Selector Switch: Rotator knob
• Accessories: Stinger, magentic mount and extra cable
• Parameter: Displacement & Velocity
• Usage: Vibration Testing Machine

We are supplier and exporter of this product.

• Brand Name: NMC

We are offering transformer winding resistance meter. The nmc 'tdr' is a high precision, new generation, light weight large output current and micro-processor controlled tester. This replaces old dc wheat stone bridge and double arm bridge for measurement of dc resistance. 'tdr' adopts new advanced test current power supply technology,four terminal measurement, digital display of resistance value and test current. 'tdr' ispowered by 220v ac mains single phase supply. The measurements are accurate as the test current is highly stable. High automation is achieved with automatic discharge warning. principle: the constant current generated is fed to the resistance under test through the current terminals and the voltage drop across the resistance under test is measured and displayed in ohms. A true four terminal measurement is used to eliminate the need for lead resistance compensation. features : >> constant current source>> saves 255 test results in memory>> built-in printer description: nmc 'tdr' is a new generation, digital resistance meter using 4 terminal measurement technique. Built in printer for printing results. The entire test is done quickly. 'tdr' generates constant current, powers up the test current, takes the readings, and displays the results on the lcd screen. The 'tdr' is encased in an aluminum alloy cabinet. 3 models available : tdr-10 , tdr-20 , tdr-40.

• Brand Name: Ultra-Shine

We are offering gold loss controller, itâ��s an electromagnetic field emitter which emits electromagnetic field of various different frequencies. This field excites the metal particles (platinum, gold, palladium, silver, copper, zinc) present in the atmosphere and forces them to settle down on the ground floor. Thus you can also recover your metal particles which you lose in atmosphere while filling and polishing it. How it is used? just connect the plug in a socket and place the machine in your filling, polishing and buffing department. Now start the normal manufacturing process. key features: * settles down all the precious metallic dust from the atmosphere. Ï� (platinum, gold, palladium, silver, copper, zinc) ï� * helps in reducing refinery work. Ï� * no other consumables required. Ï� * long life of the machine. Ï� * cost effective. Ï� * unlimited technical support at no extra charge. Ï� * no minimum orders. * ï� prompt courteous service.

We Offer Battery Charge Monitor BCM-01 is a micro controller based unit, which is used for monitoring the charge level of stationary battery systems. This unit measures the voltage drop across a shunt through which the battery is connected to the charger and the load. The unit displays the charge remaining on the battery in terms of Ampere- Hour (AH) capacity as well as remaining time for which the battery can supply rated current. The unit incorporates precision analog and digital circuits and has the following features Feature Ø A settable low charge alarm Ø Display of the charge on the battery as AH and Remaining time for complete discharge. Ø Field Setting of the Rated battery capacity in AH. Ø Field setting of the shunt rating. Ø Remote Indication of fully charged Battery condition. Ø Soft calibration – no trimpots. Ø Optional- RS 485 Modbus link for PC connectivity. Ø Optional Ethernet connectivity for networking. Ø Operates directly from the battery being monitored. Ø User friendly LCD display messages. Ø Field setting of Battery efficiency.

A cost effective, handheld, single-axis AC magnetic field meter that provides quick & reliable measurements of electromagnetic field (EMF) radiation generated by external sources like power lines, electrical wiring, motors, audio/visual equipment and other devices. Note: No probe is required- just position this Gaussmeter in the affected area.

• Frequency: 50Hz
• Voltage: 220 V
• Country of Origin: Made in India
• Brand Name: Om Sai Engineering
• Features: Robust design, Low maintenance, Simple installation .
• Dimensions: 220 mm(w) x 570 mm(d) x 250 mm
• Machine Material: SS
• Material Grade: SS 304 / 316
• Weight: 10 kg
• Power Supply: Electric
• Automation Grade: Automatic

Ideal for particle size analysis and separation Tri-dimensional sifting motion Intermittent and continuous shifting motion with programmable amplitude (0.5 mm to 2 mm) in step of 0.1 mm Close loop control of amplitude and validation independent of load 20 x 4 character alphanumeric LCD Very low noise operation with low maintenance Programmable shake time from 1 min to 99 min iTIME™ (programmable from 10-99 sec) mose for proper sifting of matter Suitable for dry and wet sieving Capacity up to 8 sieves (200 mm dia x 50 mm h) or up to 16 sieves (100 mm dia x 25 mm h)

Three-phase four-wire multi-function electronic meter is a fully programmable and very powerful meter that can satisfy your most demanding request. It can provide you with extra function of reactive energy measurement, instant variable of current and voltage for each phase and load profile. The accuracy for active energy measurement can be 0.5s. Its reliable performance under heave load and high harmonic conditions make it a superb choice for the gate of power station or large power consumer. It complies with IEC 62053-11. 

Utility: To determine the colour fastness of textiles to dry or wet rubbing provided with a crocking finger of 16mm diameter with a down ward force of Newton's and facility for mounting standard crocking fabric. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results. Available in various models MOC: SS 304 / 316

Our company is ranked amidst progressive distributors of the product in Mumbai(India) as well as varied other marketplaces. Our customer-centric approach while making online or offline procedures makes us a reliable name. We keep a close eye on the transactions made to keep all the information shared by the clients safe and confidential. This portable and compact instrument is for precise measurement of voltage and current. Range switch is provided for precise readings in low voltage & current ranges. Working Connect any power supply(maximum 200VDC @20Amps) to the POWER IN terminals and connect load at POWER OUT terminals. Read the readings of voltage & current drawing by the load and the mul

we are offering ph-orp meter. phs-8b intelligent industrial ph transmitter is the intelligent industrial online analytical instrument. it can be connected to the high-impedance analog signal ph orp electrode of many companies at home and abroad. it can be used to detect the ph, orp value of the solution in chemical, petroleum, rubber, paper, tobacco, alcohol,sugar, food, mining, smelting, iron and steel, power generation, pharmaceuticals,water treatment and other industries.

We offer Flow Meters. Kent Oil Meters are accurate, reliable and economical way of obtaining all the information a user needs to control oil consumption in Generators, Boilers and to measure exact oil receipts. Wherever oil is received, stored and used, Kent Oil Meters measure, totalise and records flows precisely. Kent oil meters can be installed in the pipeline and would totalise the flow of oil flowing through the line.

Description :-For Reliable & Highly Accurate Determination of Absorbance, Transmission & Concentration of Liquids.Range 190 to 1000 nm.µP based wave length selection4 digit LED display for wavelength 3 ½ digit display of %T, Abs. & Conc.Highly accurate & stable4 Position sample holder

Visco series rotational viscometers allow fast and accurate. viscosity readings. They are low budget and easy to use. Our Visco series is Rotational Digital Direct Reading viscometer to measure absolute viscosity of Newton Liquids as well apparent. viscosity of non-Newton liquid featured by high flexibility reliable Test result, easy operation and good appearance. Standard Delivery : Viscometer head with serial number Stand, 3 levelling adjustment for stand Boss head Standard spindles Spindle protector Spindle rack Power supply cable Calibration Certificate Operating manual. Extra Accessories : APM (Small Sample Adapter) LCP (Low Viscosity Adapters) Heldal unit (High Viscosity Adapter) Silicon Standard Oils Thermostatic Bath Universal adapter for all accessories such as Brookfield (Optional) PPR Plugging system (Optional) Note : The material of the accessories including the temperature probe can be changed under customer specification (High Temperature Resistance) Technical Data : Precision : ± 1% of full scale. Resolution: Using low viscosity adapter: 0.01 For lower than 10.000 viscosity cP: 0.1 For viscosity equal to or above 10.000 cP: 1 Repeatability: 0.2% Supplied at 100-240 VAC, 5060 Hz Spindles AISI 316 stainless steel spindles, easily identified by number and letter when changed according to range of viscosity.

• Type: Multifunction Meter
• Certification: ISO 9001:2008
• Weight: 200-300gm
• Voltage: 3-6VDC, 6-9VDC
• Application: Energy Monitoring
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic
• Power Source: Electric
• Feature: Accuracy
• Warranty: 1Year

digital frequency meters, Solid State Relays, Indicator Lamps, Neutral Links

15ch to 105ch isolated input wireless logger DC voltage/temperature with thermocouple or Pt sensor, humidity, resistance 100ms interval recording in real-time

  Flow Meters: Chemtrols is a solution provider of Flow Measuring instuments based on various principals to meet the application requirements of process plants, briefly summarized below.   Flow Measuring Sensors : Besides, we also offer a wide primary Flow measuring Sensors like Orifice, Flow Nozzles, Venturi Tubes, Cone Flow Meters and Pitot tubes. Orifice & Nozzles :   Primary Differential Pressure devices   Chemtrols offers a wide range of primary differential pressure devices to measure flow, based on various principles of physics. These include flow elements like the Measuring Orifice, Restriction Orifice, Flow Nozzles, Venturi Tube, Cone Type flow meter, Taper Seg Tube, Pitot tubes and related accessories like the Condensate Pots, Fittings etc. in conjunction." Orifice Plates & Flanges : These primary devices like the Measuring Orifice and restricted orifice are used for fluid & gas flow measurement by means of the differential pressure and also pressure reducing devices, are intended on pressure drop and steady fluid flow. Also View Flow Metering Metering Skids for Gases and Liquids Level Instruments Temperature Mechanical Products Oxygen Analyzer / Sensor Metal Tube Rotameters Download

• Dimensions: 327 H x 187 B x 104 D mm

The 3 Phase CT Operated Trivector Meter is designed for metering of HTLT consumers and for feeders. The meter has advanced data and tamper recording capabilities and is provided with communication ports. Software is available for data collection, load survey analysis and energy management applications. The meter can be interfaced to a variety of communication devices.

ANALOGUE METER WITH MOVING IRON MOVEMENT - DE(FEATURES & BENIFITS):Scale interchangeability. Near linear scale. Glass filled polycarbonate housing. Knife edge pointer. Easily replace able glass and bezel.