GVJT Systems Jogeshwari, Mumbai, Maharashtra

High accuracy of measurement even for small sample pieces Light-weight for portability Large back-lit LCD display Battery capacity indication Average battery operating time of 250 hours (without backlight) and 30 hours (with backlight) Hard-wearing sensor head Sensors with plug-ins for ease of exchange and  1.6 m long cable

Material : Alloy Steel

Shape : Rectagular

Feature : Easy To Fit, Perfect Strength

Automatic Grade : Automatic

Display : Digital

Measuring Range : 100-200mm

Gauge Size : 4inch

Gauge Diameter : 20-40mm

Supports probe type 10N, 50N and 100N. Unique probes for special application Measurements of the hardness of layers starting at 30 microns! Hardness measurement in hard-to reach areas (position of probe does not influence the result of measurement). Ultra-small control area (from 1 mm). Control in slots and blind holes from 5 mm (not provided by rival devices). Invisible print (Spot/Dent) on mirror-surface.

Measuring Principle During the measuring process, the sensor makes inline movements along the probing path. The stylus moves up and down in accordance with the probing path profile. These movements are translated into electric signals, which are amplified, filtered and converted into digital signals using an A/D converter. The CPU then processes these signals as Ra and Rz results (or Rq and Rt results) and shows them on the display. Surface roughness tester offering excellent value for money Piezoelectric probing system OLED liquid crystal, illuminated display with adjustable contrasts Dynamically shows measuring progress on the display Rechargeable, long-life, fast-charging lithium-ion batteries Acoustic and visual warning signals when lithium-ion batteries are low Integrated sliding cover to protect the probe stylus Turns itself off automatically after 2 minutes Acoustic „Start Test Ready“ signal Ra, Rz, Rq and Rt roughness parameters in a single device Easy calibration using the keyboard USB port for connecting the charger cable Full LCD dot matrix and interface notifi cations DSP chip for data processing and calculation (enables fast data processing)

Application for crack detection on tubes, pipelines, boilers, constructions, wheels-rims, containers, etc. from steel or aluminium Crack localisation and reliable measurement of crack depth Crack detection not influenced by corrosion, paint and/or insulating layers of up to a maximum of 10 mm Fast, safe and problem-free crack detection with intelligent technology High cost reduction due to timely repair potential Suitable for finding hair-line cracks and determining metal fatigue No need for consumables, such as couplants, dye-penetrants, etc. Quick amortisation of purchase price when used to conduct preventative maintenance

Application for crack detection on tubes, pipelines, boilers, constructions, wheels-rims, containers, etc. from steel or aluminium Crack localisation and reliable measurement of crack depth Crack detection not influenced by corrosion, paint and/or insulating layers of up to a maximum of 10 mm Fast, safe and problem-free crack detection with intelligent technology High cost reduction due to timely repair potential Suitable for finding hair-line cracks and determining metal fatigue No need for consumables, such as couplants, dye-penetrants, etc. Quick amortisation of purchase price when used to conduct preventative maintenance

2 in 1 impact device D + DL for measurements on small and hard accessible points Mountable DL probe (Ø 4 mm, length 50 mm) Large measurement range High accuracy ±2 HL Easy to calibrate Very large memory Re-chargable battery Applicable under extreme conditions (-40°C to 80°C)

Portable, clamp-on ultrasonic transit time flow meter Non-invasive for measuring the flow rates of most clean liquids in pipes with gas/solid content less than 10% of volume, built-in thickness gauge and ability to incorporate heat quantity measurements   Capable of working on pipes DN15 – DN 2500, across multiple different pipes/pipe sections.  Large internal database of pipe, fluid and lining materials (19+ for fluids, 23+ for pipe and lining materials)

Large measuring range i.e., 0 microns to 5mm Statistical analysis with PC software Non-magnetic coatings such as chrome, paint, zinc, plastic, enamel, copper, etc. on steel and iron substrates. Furthermore, insulating layers such as paints, plastics, enamel, paper, rubber, glass, etc. can be measured on substrates such as aluminum, zinc, copper, brass and some types of stainless steel (non-magnetic metals). Measuring of anodized aluminum is also possible. Practical V-groove for measuring on round objects Certified products as per ISO EN 9001

Application : Measuring Use

Feature : Easy To Use, Electrical Porcelain

Frequency : 50Hz

Power Source : Electric

Warranty : 1year

operation current : Single Phase

Automation Grade : Automatic

6 varities of optional impact devices for various applications Optional or In built Printer Large memory capacity with information about number of group, date, average value, impact device, impact times, material for every measured value Test at any angle, even upside down.

Areas of Use: Input/output control of metals, alloys; Sorting scrap; Spectral analysis in laboratory studies Feature: Carbon analysis: The LIS-01 allows measuring carbon concentration in steels without using argon, directly in the air. Speed: High speed analysis, result in 1 sec. Accuracy: Provides unsurpassed resolution of 0.01 nm over the entire measurement range. Portability: Small dimensions and weight comparable to a hand held power tool. Reliable: Unlimited operating life, compared to X-ray fluorescence spectrometers (XRF). Built-in grade library: Based on the results of the analysis, the steel or alloy grade is displayed on the screen. CE Value: Measurement of carbon equivalent values Camera: High resolution camera to capture the location of analysis

Power : Replaceable Li-ion Battery

60°: 30 – 70 GU (according to ISO 2813) or 10 – 70 GU (according to ASTM D 523) Complied to EN ISO 2813, DIN 67530, ISO 7668, ASTM D 523 Upto 60 hours or 10,000 measurement operating time handy design and robust casing for a long service life

Large measuring range i.e., 0 microns to 5mm Statistical analysis with PC software Non-magnetic coatings such as chrome, paint, zinc, plastic, enamel, copper, etc. on steel and iron substrates. Furthermore, insulating layers such as paints, plastics, enamel, paper, rubber, glass, etc. can be measured on substrates such as aluminum, zinc, copper, brass and some types of stainless steel (non-magnetic metals). Measuring of anodized aluminum is also possible. Practical V-groove for measuring on round objects Certified products as per ISO EN 9001

Application : Measuring Use

Feature : Electrical Porcelain

Power Source : Electric

Colour Display data in CIE_Lab ΔL, Δa, Δb, CIE_Lch Test Time is 3 seconds Test Angle CIE 10 Degrees

Size : 171 x 50 x 48.8 mm