Hand Operated Valve Dealers in Mumbai (25 products available)

3-WAY/3-POSITION (CLOSED CENTER) NON-INTERFLOW MANUAL VALVE WITH POSI-CHECK® Application – Single-acting cylinders. Actuation – Lever operated, detent positioned. Functions – Pos. 1 – Oil is directed from pump to cylinder and “holds” with pump shut off; line to reservoir is blocked. Pos. 2 – All oil is open to reservoir through tank line. Center pos. – Cylinder pressure is held; pump should be shut off. Used on these pumps – P460, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series. 10,000 PSI., 3/8" PORTS, 5 GPM MAX FLOW RATE. NOTE: A Pressure Switch and/or Gauge (Analog or Digital) may be attached if desired. NOTE: Also, valve may be remote mounted with a 9510 Subplates. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) orCounter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. NOTE: Valves 9501, 9502, 9504 and 9507 can have a port blocked or have a closed center position. When a port is blocked and the valve is shifted to the blocked port, the pump will generated excessive heat. An electric or rotary air pump can either be turned off manually or with a pressure switch. Reciprocating air pumps may be adjusted to stall out and stop. NOTE: Gauge ports monitor pump pressure only, not pressure to the hydraulic cylinder(s). IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps. IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9502 and 9520, order four 12001 cap screws. For valve 9576, order four 17428 cap screws.

We always remain concerned about delivering a flawless range of products and thus we store the entire lot under secured environment till the final dispatch of the orders. Owing to our well-established set-up in Thane(India), we are capable of catering to the requirements of clients with utter ease.

These advantages are especially for large Valves applications. The best and obvious advantages are saving of weight, space and cost. We are also known for Butterfly Valves Manufacturer in India. The maintenance costs are generally down because there is less number of mobile parts and there are no pockets to store fluids.Valves are especially well for the handling of large flows of liquids or gases.

• Description: 2/2 way manually wheel operated Ebonite Lined diaphragm valve. End to end design as per  BS EN 558-1:1995.
• Size / End Conn.: 15 NB to 100 NB / Screwed BSP & Flanged end (ASA 150#, BS 10 Table 'E', 'D', 'F') , For above sizes consult us.
• MOC: STD - IS 210 Gr FG 220 (Cast Iron with Ebonite Lining) Optional - IS 1865 -1991 SG 400/18 (Ductile Iron with Ebonite Lining)
• Diaphragm: STD - Nitrile, EPDM and EPDM backed by PTFE
• Temp.: STD - 80°C Optional - 110°C
• Actuator: STD - Manual - ABS, Cast Iron Wheel

We are the main supplier of this product.

• Size: Available In Different Sizes
• Pattern: Plain
• Automatic Grade: Manual
• Feature: Durable
• Type: Directional Control Valves
• Finish: Polished

We are largest valves manufacturers in India and metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows unrestricted passage. The valve may also be opened incrementally to regulate flow. There are different kinds of Butterfly Valves, each adapted for different pressures and different usage.When the butterfly valve is closed, the disc is turned so that it totally shut off the passageway. When the Butterfly Valves is fully open, the disc is rotated at a quarter turn so that it allows unrestricted passage. The butterfly valve may also be opened incrementally to regulate flow. There are different kinds of butterfly valves, that are adapted for different pressures and different usage. A Butterfly valve is a rotational motion valve with a quarter turn.

Hydro Dyne’s Manual Rotary Spool Valves provide precise operator control for switching or diverter type applications. This high pressure valves are employed to reverse the oil flow. Markets: • Agriculture • Construction • Material Handling • Miscellaneous Industrial • Mobile Hydraulics   Applications: • Single & Double acting circuits • Pilot circuits • Uni-directional motors  

• Feature: Durable, High strength, Easy to install
• Features: High strength , Easy to install , Dimensional accuracy

Our hydraulic cylinders are devised under strict supervision. These are suitable for varying critical applications, viz. atomic, hydro and thermal power plants, defence, aerospace-industries, railways, etc. We use international quality seals in our industrial hydraulic cylinders and industrial hydraulic jacks, that are self-adjusting and are suitable for long trouble free life.

manual valves, automatic industrial valves, Y Type Pneumatic Valves

Hand Operated Butterfly Valve, Butterfly Valves, ball valve with actuator

Mechanical and Manual Valves, Fixed Revolving and Foldaway Handles

manual valves, Globe Valves, Butterfly Valves

manual valves, Flow Meter, IP Converter, Isolator, Transmitter

hand lever valve, Single Solenoid Valve, push pull valve, Pilot Valve

hand lever valve, SHAVO Products, Pneumatic Conveying System

hand lever valve, low gauges, Bonded Seal, Flow Control Valve

Hand Operated Forged Carbon Steel Valves, Reflux Valve

hand lever valve, Encapsulated Coils for Valves, Female Bulkhead Connector

hand lever valves, double solenoid valves, Needle Valves, Non Return Valves

hand lever valves, Gates Hose, S.S Hex Nipple, Grey Grinding Wheel

Hand Operated Butterfly Valve, push pull valve, Pneumatic Rotary Actuators

Air Operated Manual Valves, Dual Press Valve, High Pressure Pneumatic Valve

Hand Lever Operated, Flamp Proof Limit Switch Box, Vac Linear Actuator

hand lever valve, Female Connector, Rod Eye Bolt