Industrial Pump Dealers in Wadala, Mumbai (93 products available)

Only two rotating parts having principle of gear within gear but without crescent. The inner rotor is located off-center and both rotors rotate. The geometry of the two rotors partitions the volume between them into N different dynamically-changing volumes. During the assembly's rotation cycle, each of these volumes changes continuously, so any given volume first increases, and then decreases. An increase creates a vacuum. This vacuum creates suction, and hence, this part of the cycle is where the intake is located. As a volume decreases compression occurs. The Flow of liquid is axial through the elements. In built features of speed reduction as pinion is rotated at prime mover speed and outer gear rotates at lower speed.

Type : Car Water Pump

Certification : CE Certified

Pressure : High Pressure

Structure : Gear Pump

Warranty : Six Months

Brand Name : Pricol

Application : Automotive

Condition : New

WATER PUMP TATA ACE

Power Source : Electric

Features : Sturdy drive design provides strength for rigorous continuous operation. , Close coupled models with built-on speed reducers offer compact pumping unit. and Stators are available in a wide range of elastomeric.

The pumping elements are rotor and stator. The single helical rotor rolls eccentrically in a double threaded helix stator of twice the pitch length.  A series of sealed cavities 180° apart are created that appear to progress from suction to discharge during one rotation of rotor.  The opposing cavities fill and empty simultaneously resulting in a pulsation less flow.  The fluid travels axially with relatively low velocity and minimal agitation.  The stator is made of a resilient elastomeric material and bonded to the stator tube.  The important feature of the pumping principle is the ability to handle slurries and solid particles. The elastomeric stator also permits passage of solid particles due to elastomeric deformation.

Brand Name : Unitech

Rated Power : 230 Volts, 50 Hz

Place Of Origin : Mumbai  

Material : Stainless steel 304/316 Quality

Usage : For high viscosity material link greases, adhesives etc.

Features : Having digital, therefore quick change over for different volume, plc based filling system etc.

PLC BASED FILLING SYSTEM. HAVING DIGITAL. THEREFORE QUICK CHANGE OVER FOR DIFFERENT VOLUME. NO JAR NO FILL SYSTEM 2 TO 12 HEAD AVAILABLE. PNEUMATICALLY OPERATED. CONTACT PARTS IN STAINLESS STEEL 304/316 QUALITY. WITH S.S SLATE CONVEYOR. FLAME PROOF MODEL AVAILABLE. POWER 230 VOLTS, 50 Hz. USED FOR HIGH VISCOSITY MATERIAL LINK GREASES, ADHESIVE ETC. VACCUMETRIC FILLING ALSO AVAILABLE.

Hand Pump Technical Specification: Range: Approx. -1 to 25 Bar Resolution: 0.01 mBar using adjustable vent Operating Temperature: -20 to 50 deg C, humidity within 95%

The very first pump produced by Delta Group in 1968 was an Internal Gear Pump Model DIG-10 for low-pressure burner service - till this day it is in production with great success. Subsequently Delta Group had the foresight to introduce several other designs, to take care of growing industrial demands, thus placing themselves on the forefront in the field of Rotary Positive Displacement Pumps. Experience gained over years in designing and building Rotary Pumps combined with knowledge in Application Engineering has resulted in this development of New Stainless Steel Internal Gear Series specifically for food, chemical and pharmaceutical industry. Innovation, simple construction has ensured very easy maintenance and totally reliable hassle free installation. Working Principle Delta DIG series employs proven Internal Gearing (Gear within Gear) principle for pumping. The main gear is keyed to the drive shaft, and rotates concentric in the pump casing. Idler is located on an eccentric pin on the front cover to rotate freely and meshes with main gear when assembled. A crescent shaped partition precision machined on the front cover maintains a small, but positive clearance to achieve perfect scaling between parts. As the gears come out of mesh, a partial vacuum is created, forcing the fluid to rush into the pump casing and fill in the voids between the teeth. Both gears rotating in the same direction of rotation gently transfer the fluid to the delivery port. The resulting action is a smooth-steady flow; low in pulsation, noise and vibration.Single shaft design well supported on outboard bearing (except for one inside sleeve bearing) enables to pump products even with poor lubricating value unlike in the external gear pumps. External bearing construction offers easy access the pump components i.e., rotor set and even pump casing simply by removing the front cover without disturbing drive parts, bearings etc., and in place. Block pump mounted integrally on hollow shaft gearbox automatically reduces the speed (in several ratios) and enables even the pump rotor to be pulled out without disturbing the drive! It is easily possible to jacket front and rear covers for products heating - thus making the design unique and versatile - ideally suited for process pumping.Salient Features Smooth quite flow ReversibilityExcellent self priming Bracket/ Gear box mounting allows free expansion/ contraction - alignment not affectedInsensitive to viscosities Easy maintenanceAll metal construction, no contamination Built-in reducer offers ideal speed range 240~960 RPMSingle sealing, external bearing Slow speeds ensure better pumping & longer lifeLow noise and pulsation Reduced maintenanceConstruction The DIG series is modular developed with excellent interchangeability. The pump is available either as bracket mounted 'BM' or gearbox mounted 'GM" models. The bracket mounted casing construction provides stress free operation while handling products at higher temperatures. The major components are casing, front cover, rear cover, seal box (casing parts) and rotor set (rotor, idler and shaft). Most casing components are made by lost wax process for better finish and grain structure.'GM' version offers a choice of different speed ratios, making it easy to handle viscous products besides eliminating problems of alignment, extra set of coupling. Standard 4 pole or 6 pole motors can be directly coupled to such units making it very reliable, compact and clean drive. Another unique feature is the adjusting clearance between rotor set and cover by means of rotor positioning device enabling to restore pump capacity even after wear and tear after a long use.Pumps can be equipped with Heating/ Cooling Jacket on front cover/ rear cover and in some cases also Pump Housing. Choice of Mechanical Seal/ Stuffing box is available for shaft sealing.Typical ParametersCapacity upto 800 LPMPressure upto 14 kg/cm2Viscosity upto 100,000 cStTemperature upto 200°C

Brand Name : VINI

Pump Type : Manual

Usage : Transfer of liquid

Material : Plastic

Color : White

Driven Type : Electric

Automatic Grade : Automatic

Brand Name : Unitech

Filling Range : of 100ml to 500ml

Available Head : from 4 head to 12 head.

Material of Construction : Stainless steel

Size : Standard

Specifications Mitsubishi make PLC system with T" Touch Screen and VFD control for conveyor speed control Contact parts in stainless steel 304 quality Body frame made up of Stain lees steel Pneumatically operated stopper Gates for bottle entry and exit In built memory to store 25 filling setting date Setting of Volume, Speed of filling through PLC

Technical Specification:  ·          Range:  Approx. -1 to 25 Bar ·          Resolution: 0.01 mBar using adjustable vent ·          Operating Temperature: -20 to 50 deg C, humidity within  95%

Specifications Max Flow Rate586Lpm (155gpm)Port SizeInlet : 50.80mm (2" BSP)Discharge : 50.80mm (2" BSP)Air Inlet : 12.70mm (1/2" BSP)Air Exhaust : 19.05mm (3/4" BSP)Suction LiftDry : 4.57m (15')Wet : 7.62m (25')TeflonDry : 3.05m (10')Wet : 6.09m (20')Max Particle Size (Dia)6.35mm (0.250")

Mighty Mounts Oil Charging Pump Foot stand base provides excellent support & leverage while pumping against the high pressures of a running compressor.Design allows technician to add refrigerant oil to a system under pressure.Siphon hose allows for the removal of old oil to prevent over-charging.Pump universally mounts directly to the containers.Pumping of oil can be done directly from the container, keeping oil free from dirt & moisture. Fits all major brands of refrigeration oil.

For the convenience of the clients, we issue an invoice to them including the details of the sale transaction as well as indicating the quantities, products as well as agreed price. Thus, we maintain transparency in our dealings and payment procedures. Staffed with latest machines and leading technology, we make certain that the material we use is as per the stated norms and meet the international standards.

skan inc manufactures extreem quality of fogging machine and supply it to our customers..

We are considered as one of eminent Water Pump Manufacturers, Suppliers, and Exporters in domestic as well as international markets. These Water Pumps are pinned with brass blade and are manufactured from high-grade brass. Our conducting torque test ensures its precision and flawless delivery. Moreover, we offer Water Pump at the most discounted price in the industry. Appreciated for : Precision Durable performanceCompact sizeCorrosion resistance

Brand Name : Nano

Capacity : 30 ml

Usage/Application : Office

Operation Mode : Battery Operated

Features : Light Weight

Features SFPH Steel Hand Pump Internal pressure relief valve for overload protection. Large oil capacity, suitable for wide application. Two speed auto-switch reduces manpower and increase efficiency. For technical specification please refer our product catalogue page No. 39

Driven Type : Diesel

Color : Grey, Silver

Condition : New, Used

Feature : Durable, Heavy Power

Type : Diesel Injection Pump

Weight : 100-300kg, 300-500kg

Warranty : 3 MONTHS

Country of Origin : India

Sound : With Sound

your trusted autoparts service provider in Mumbai, MH. With years of experience in the industry, we are dedicated to delivering top-notch automotive solutions to meet your needs. Our team of skilled professionals is committed to providing exceptional service, ensuring your vehicle runs smoothly and efficiently. Whether you require repairs, maintenance, or high-quality autoparts, we have you covered. At Diesel Master, we prioritize customer satisfaction and strive to exceed your expectations. Trust us for reliable and affordable autoparts service that keeps you on the road with confidence.

with the assistance of an experienced team, we bring forth high quality medical vacuum pump. Today, we are well reckoned as one of the prominent medical vacuum pump suppliers based in india. Our vacuum (suction) supply system is available with tefc electric motor of siemens or crompton that assures long lasting performance. Air cooled vacuum pump system offered by us is available at very affordable prices within the stipulated timeframe characteristics air cooled type free air delivery to suction - 70 % of p.d. Approx. Max working pressure -29” of hg or 730 mm of hg. single stage three cylinder fitted with ms channel frame, complete with v-belt drive, belt guard etc. Along with the following-114” bsp stainless steel ball valve with ptfe seat with suitable brass adapters and non return valve silencer at discharge end projecting (open to atmosphere) outside the plant room copper pipe interconnection up to receiver mounted of required capacity demanded by hospitals hospital architects hospital construction companies hospital consultant companies nursing homes

We can offer you water cooled heat pumps across the following ranges: 1.       RC Group These heat pumps are the conventional reversible heat pumps with scroll and screw compressors optimized to run with eco-friendly R410a and R134a refrigerant and have SS316 brazed type heat exchangers. a.       Nemo HP – Heating capacity: 10 kW – 30 kW b.      Manta EVO WP – Heating capacity: 30 kW – 604 kW c.       Frigo Screw WP – Heating capacity: 477 kW – 1980 kW 2.       Calorex Heat Pumps Calorex heat pumps are heat pumps with scroll compressors and run with eco-friendly R134a refrigerant. They are extremely robust machines and have a WRAS approved heat exchanger of marine grade quality a.       WW Series – Heating Capacity: 30 kW – 120 kW

Solar submersible pumps is in great demanded by farmers or in remote areas where there is no power grid system. It is one of the sensible and effective uses of solar electric power. With our engineering expertise, REPL is ready to take on your water pumping needs with the use of green energy and affordable cost.

 CED coated pump components in Pacific Series• Stainless Steel insert provided in casing & adaptor• Brass Impeller• Self Priming upto 8.0 meter at mean sea level• High quality and long life mechanical seal• Fitted with Thermal Overload Protector• IP 55 protection• Class F insulation• Aluminium pressure die cast motor body Applications • Bungalows, flats, laundries, clubs• Gardening, lawn sprinklers• Booster applications

KIESEL hose pumps are conceived for dosing and filling of puniest volume. At the assortment of the materials the great importance is set to the abrasion resistance. ADVANTAGES : Without Lubricants All product touched parts in stainless steel Easy Cleaning Simple and Fast Demounting FDA-conformable Pump Sizes : SLP02 to SLP25 Capacity : 200 to 2500 I/h Max. Suction Lift : up to 5 m Ws Max. Pressure Head : approx. 2 bar Max Temperature : approx. 100°C

Capacity : Up to 60 m³/hr (1,000 LPM)

Head : Up to 100 mts.

Suction Size : Up to 80 mm

Material of Construction : C.I. / C.S. / Bronze / SS-304 & 316

Single or Multi-Stage Self Priming regenerative pumps with open impellers, designed for low capacities, medium heads, high suction lifts and volatile liquids. Require only initial priming. Features Available with: Mechanical seals (on both ends) Applications Boiler feed Chemical process & transfer Barrel unloading Marine applications Water supply General industrial use

Our spray nozzles are widely used in various fields for precision and quality. Steel� cement� chemical� petrochemical� pulp & paper industries etc are some of the industries to which our nozzles are frequently supplied. Also our products are certified for specific applications within dairies� food & beverage� brewery� marine & pharmaceutical industries. Our products are successfully marketed and supplied nationwide and are also being exported globally.

Weight : 126g

Length : 320 mm / 12.6’’

Mounting : Clip (ref. 1110B)

The Air Profil LL has been designed to inflate tires more quickly than a mini-pump while reaching higher pressures. Pressure 9 bar 130 psi Barrel Aluminium Handle Aluminium Connection Reversible Presta Schrader Thumblock lever Aluminium

Special Portable Direct Drive Vacuum Pumps with Vacuum Trap for applications In Labs , R&D Reactors & Pilot Plants.

Proven performance in a variety of applications These submersible Flygt C-pumps are built to handle capacities of up to 3000l/s (48000 gpm) with motors up to 775 kW (1050 hp). The standard versions of these pumps are made in cast iron and also come in industrial configurations for more demanding applications like municipal sewage and industrial effluent. Explosion-proof versions are also available Product quality in every detail The classic C-pumps with shrouded single and multivane impellers have proven themselves over the years. They are designed with an extensive range of hydraulic units available to handle different types of media. These submersible pumps require neither special housing nor a superstructure to support them, thereby reducing construction costs considerably. They are also designed to be small with motor and hydraulics integrated into one compact unit, which means that pumping stations are smaller and less complex to build. The smaller C-pumps come with the Flygt Nevaclog® impeller, which has excellent flow-passing properties. The multivane impellers for bigger pumps are designed for optimum hydraulic efficiency. Operating submerged, the pumps take up less space, and noise and cooling problems are virtually eliminated. Additional unique features include a squirrel cage induction motor, mechanical shaft seals, and Spin-out™ patented protection

Alfa Laval LKH pump range, is an efficient, versatile and hygienic self-priming pump. It uses a combination of air-screw technology and advanced design to meet the most stringent requirements in a range of hygienic industries including food, dairy, beverage and home-personal care. Using the combination of advanced air-screw technology, optimized impeller and casing geometry, Alfa Laval LKH Prime exceeds industry expectations for efficient operation, reduced energy consumption and CO2 footprint. LKH Prime is engineered to meet the most stringent requirements of the hygienic industries. It is EHEDG certified and authorized to carry the 3-A symbol. Characterised by reliability for improved operational productivity and designed for Cleaning-in-Place (CIP) duties containing entrained air, LKH Prime can also pump product, potentially reducing the capital investment when designing process systems - whatever the industry. Quiet in operation, LKH Prime reduces sound pressure levels by 80 per cent when compared to pumps using traditional pump technologies for CIP/entrained air applications. This noise reducing feature is a smart way to improve the working environment and plant safety for employees. The pump is easy and cost effective to service and maintain.

EXA MINI Special Feature Built-in thermometer (°F / °C) for oil temperature check   EXA MAX Special Feature Sturdy steel full protective frame for greater pump durability and stability on soft or uneven surfaces