Ipwt Corporation Deonar, Mumbai, Maharashtra

The vehicle mounted jetting cum suction unit to be capable of air lifting of dense waste sludge like mud, slurry, small stones, debris, grit etc. from sewer lines, storm water drains etc. thorough vacuum mode and capable of jetting civil and industrial sewer lines of diameters ranging from 200 mm to 2000 m. It consists of a water tank having a volumetric capacity of 5000 ltrs. The equipment to be mounted on GVW of not less than 25 MT, EURO III Chassis. Sewage collection tank (suction dump tank) to be mounted on separate

COMPAK®is especially designed to make the task of garbage collection in the city main streets, easy and effective. These units are state of the art and can be parked at one central collection point. COMPAK® units are designed not only to compact garbage but also to safely store high liquid content wastes in a safe controlled environment. It provides economy in garbage compaction resulting in lesser number of trips to landfill, saving on fuel cost. The refuse is loaded directly into the compactor head, which packs the refuse into the container. Application: 1. For collection and hygienic storage of garbage in markets and densely populated localities 2. Allows high volumes of garbage storage 3. The main central garbage collection and compacting container in the continuous relay system resulting in achievement of large volume of garbage transfer. Advantages: 1. Carries the garbage load of 5 conventional trucks. 2. Enables the ram to dwell against the compacted waste longer for superior compaction ratios. 3. Quick Clean Tank eliminates troublesome fuild build-up behind the ram. 4. Odour elimination device available. 5. Low noise operation.

Application: -Bulk compaction and transfer of municipal solid waste from satellite vehicles to large solid waste carrier vehicles. Advantages: -Decreasing the volumetric municipal solid waste load in landfills. -Decreasing the number of long distance trips of waste transporting vehicles thus reducing transport cost. -Clean, environment friendly and economical transportation of municipal solid waste in closed body containers.

The IPWT Sidepak® Garbage Compactor is the most suitable system for solid waste transportation from market places, industrial and commercial places approachable through streets, narrowest lanes, and by-lanes. The IPWT Sidepak® is capable of manual loading of refuse from the side towards the foot-path into the refuse body (6m3). Once the garbage is loaded into the extreme front side of the unit body, it is pushed hydraulically toward the rear till the body is full. The garbage is dumped from the rear full cross section open able door by means of hydraulically operated push plate. Application: -Allows point-to-point collection of refuse. -Convenient manual mechanised side loading and unloading. -High pressure positive garbage compaction. -Hygienic transportation in fully enclosed body. Advantages: -Carries garbage load of two conventional trucks.Limited dimensions, suitable to operate on smaller streets. -Side – loading prevents cross-parking, thus avoiding traffic pile-up. -Mechanised bin-lifting arrangement option for ease of operation. -Maintenance is virtually nil for the first few years. -Easy to operate as no special skill is required.

The truck mounted Sewer Jetting Machine is designed to use high pressure water jets to remove obstruction, soluble grease, sand and other materials from R.C.CS.W. pipes. The equipment is capable of use in all weather conditions.

The Vehicle Mounted Suction Unit shall be robust in construc­tion and shall be used to create a vacuum for syphoning out mud and slurry, grit and other material from sanitary, storm and sewerage systems. The unit shall be capable of syphoning out material from a depth of 8 mtr. The unit shall be such that 1 driver assisted by two helpers shall be adequate for all opera­tions of the unit.Cleaning & Maintenance by sucking the sludge from the sewer manholes and water entrances of Storm Water Drains.Discharge of sludge material at designated place in an environmentally friendly & hygienic manner.

Heavy duty power rodding machine is designed to remove hard chokes, roots of the trees and obstructions from the storm water drain, ducts and sewer lines. The machine shall get a drive from the chassis engine through a Power Take Off (P.T.O). The machine shall be capable of pushing, pulling and rotating 10mm diameter sectional steel sewer rods using various cleaning tools to clean and remove obstruction from storm and sanitary sewer lines. The unit shall be suitable to carry rod storage reel and necessary tools.

Application: 1. Vacuum type Mechanical Road sweeping for litter-free roads and sidewalks. 2. For quick and efficient Road Sweeping. Advantages: -Environment friendly, dust-free. -Versatile with high productivity. -Safe, ease of operation having ergometric comfort. -Economical operation with simplified maintenance. -One man operation. -Effective Sweeping of litter, leaves, small debries dust etc. from Roads & pavements. -High Vacuum waste collection system. -Water spray system for dust control. -Easy reach with optional wander hose for cleaning between parked cars, corners, road dividers etc.

The rear loading compactor shall be mounted on suitable 16 Ton GVW chassis. The compactor shall comprise of three main parts. 1. The body and Ejection Barrier 2. The Hopper and compaction hydraulic unit at rear body. 3. The bin lifter Mechanism. Application: 1. Allows point-to-point collection of refuse. 2. Convenient manual mechanised rear loading and unloading. 3. High pressure positive garbage compaction. 4. Hygienic transportation in fully enclosed body. Advantages: 1. Carries garbage load of two conventional trucks. 2. Unique compaction mechanism. 3. Mechanised bin-lifting arrangement for ease of operation. 4. Noticeable time and fuel-saving, lesser polluion. 5. Low maintenance cost. 6. Easy to operate as no special skill is required. 7. High Pressure Self washing system 8. Sump Tank 9. Limited dimensions, suitable operate on smaller streets.

Mobile Auto Tipper The Auto tipper shall be useful for transportation and refuse collection from narrow lanes, individual houses to its disposal point. The operation of unloading i.e. tilting of container to its disposal point shall be hydraulic. The capacity of FRP container hopper shall be approximately 1.5 cu.m. Application 1. Mechanical tipping arrangement 2. Easy to operate as no special skill is required 3. Popular system : low capital cost 4. Quick turn-around as garbage transferred to main collection container or point 5. Very low maintenance cost 6. Modern equipment : increases dignity of labour Advantages: 1. Mechanical tipping arrangement 2. Easy to operate as no special skill is required 3.Popular system : low capital cost 4. Quick turn-around as garbage transferred to main collection container or point 5. Very low maintenance cost 6. Modern equipment : increases dignity of labour

The Auto Bin Lifter shall be useful for transportation of refuse, silt, grit or any other waste from the collection point to its disposal point. The operation of lifting and placing the bins on the vehicle, transporting to its disposal point and unloading shall be hydraulic. The lifting capacity of DIN plastic Galvanized garbage bins shall be either 1 no. 1100 lts. or 2 nos. 660 lts. The equipment shall be operated hydraulically. Application: -Easy to operate as no special skill is required. -Quick and efficient lifting, transportation and unloading. -Popular system : low capital cost. -Can carry two 660 lts. DIN bins or one 1100 lts. DIN bin. -Very low maintenance cost. -Modern equipment : increases dignity of labour. Advantages: -For safe and hygienic collection and storage of garbage. -For quick and efficient lifting, transportation of DUN bins from narrow lanes which are inaccessible to Garbage Compacor. -For multi-point pick-up application of the truck using standard -European DIN containers. -Suitable for handling both, dry and wet garbage material. -Continuous relay system achieving large volume of garbage transfer. -Suitable for primary collection from narrow by-lanes using container relay system.

Application: -Crushing of solid waste such as debris, construction and demolition waste, household green municipal waste. Advantages: -Reduction in volume of solid waste by 30 – 90% thereby reducing the dumping and transportation cost -Increases the utilization life of the landfill. -Prepares material for further processing of solid waste treatment such as shredding, incineration etc.

Application: -High compaction and volume reduction of solid waste in landfill by effective spreading and crushing. advantages: -Increasing the space utilization of landfill thereby increasing the utilization life of landfill. -Economical operation and better management of landfill. -Minimising the environmental impact. -Minimises landfill fires due to the compaction of waste. -One man operation.

Dumper Placer / Skip Loader: The Twin Dumper Placer shall be useful for transportation of refuse, silt, grit or any other waste from the collection point to its disposal point by two containers at a time. The operation of lifting and placing the container on the vehicle, transporting to its disposal point and unloading shall be hydraulic. The lifting capacity of steel garbage container bin shall be 2.5 cu.m. The equipment shall be operated hydraulically. Applicarion: 1. Suitable for handling wet refuse. 2. Suitable for primary collection from main streets using container relay system. 3. Achieves large volumes of garbage transfer in a continuous relay system. 4. Allows safe, hygienic containerised collection and storage of refuse. 5. Allows multi-point pick-up application of truck through specially designed containers. Advantages: 1. Machanized skip bin-lifting arrangement. 2. Easy to operate as no special skill is required. 3. Popular system: low capital cost. 4. Quick and efficient lifting, transportation and unloading. 5. Need not be positioned precisely for hooking the container. 6. Very low maintenance cost. 7. Modern equipment: increases dignity of labour.

FUELDISP® is designed to store, transport and supply diesel to operational areas where diesel dispensing stations are not available. It enhances the safety of operators eliminating unsafe and tedious barrel fuelling operation. FUELDISP® is used by Oil Companies for rural marketing, fleet operators, air sea port ground support departments, mining and construction companies, etc.

Application: -Effective cleaning of sand for litter free beaches. -Removes everything larger than the chosen screen size and returns sand to the beach. -A profitable tool for golf course, Racecourse maintenance and Landscaping. Advantages: -Safe, Fast & Economical operations. -Efficient Beach Cleaning operations. -Maintains the beach free of waste, garbage & seaweed. -Cleans up even small objects & particles of dust (such as cigarette stubs), Broken glass, stones, carols etc. -High processing rate of cleaning the beaches.Waste collected in hydraulically operated hopper for ease in discharge. -One man operation.