Back Back
Soft Iron Ring Joint Gasket
125 - 25,000 Per Piece
100 Piece (MOQ)
Ring Joint Gasket
Get Price Quote
Best Deals from Joint Gasket
Ring Type Joint Gasket
Get Price Quote
We are offering ring type joint gasket. Ring type joints are primarily used by the oil, gas, petrochemical and offshore industries, they are also commonly used on valve, pipe work assemblies and with some integrity vessel joints. Ring type are use to seal flanged connections subject to high pressures and temperatures. These precision made solid metal gaskets form a metal to metal seal with the flanges. The gasket cross-sections are designed to concentrate the bolt load over a small area to produce a high seating stress. The gasket metal should always be softer than the mating flanges. The high seating stress causes 'plastic-flow' of the gasket into the flange faces to create seal. The 'rx' and 'bx' gaskets are designed to be pressure activated by the sealed media which improves the efficency of the seal as the internal pressure of the system increases. 'r' series ring type joints can contain pressure up to 10,000 psi 'rx' and 'bx' series ring type joints can contain pressure up to 20,000 psi the gasket and flanges must be manufactured to precision dimensions, surface and hardness.
PTFE Flex-O-Seal Joint Gasket
Get Price Quote
Flex-O-Seal is a unique sealing material manufactured from special grade of expanded 100% pure PTFE by transforming the fibrous structure by means of a special process. Though very tough, it is spongy and suited to almost all flanges, covers and narrow cavities. Its special soft and flexible character enables it to be the most ideal seal under pressure without significant cold flow even on irregular, badly damaged or corroded flange surfaces. Flex-O-Seal is recommended at temperatures from -240oC to 310oC, PH Rang 0-14. It does not deteriorate due to stocking for long time. It is resistant to high pressure, Non-toxic. It is not recommended for use against elemental fluorine, alkali metals and strong oxidizing agents. Flex-O-Seal is safely used in petroleum refinering companies even in their offshore operations, corrosive chemical processing, food processing, paper mill, marine installation, for glass lined or fibre glass reinforced vessels and tank lid sealing, manhole covers, vent pipes, heat exchangers, pumps or compressors housing flanges, valves and many more industrial applications where conventional pre-cut gaskets are not readily available or unsuitable.
Ring Joint Gaskets
Get Price Quote
We manufacture Ring Joint Gaskets conforming to R series in Octagonal / Oval shape, Bx and Rx series of API std 6A and ASME B 16.20. They are used in the production and refining process pipelines of oil and Gas Industries.Made from solid metal types like : Soft Iron/LCS - Low Carbon Steel – Electroplated as per your specs zinc electroplated (By Default); Yellow Pacification; Cadamium Plated and Hot Dip Galvainsed. Stainless Steel AISI 304/316/321 Income and other Alloy grades.
Ring Joint Gaskets
Get Price Quote
EP Gasket Rings
Get Price Quote
5000 Piece(s) (MOQ)
Ring Joint Gasket
Get Price Quote
Ring joint gaskets are manufactured in different solid metal types such as Soft iron/SS304/316/321 metals and similar other alloys. These ring joint gaskets are ideal for the industrial use due to their enhanced performance and reliable durability. These ring joint gaskets stop leakage that causes corrosion around manholes and hand holes in steam boilers, water heaters and air tanks.
Ring Type Joint Gasket
Get Price Quote
Ring Joint Gaskets
Get Price Quote
Ring joint gaskets are produced from different solid metal types. They are used to stand high pressure and temperatures and they are employed where corrosive agents are present. These gaskets are obtained by mechanical working from forged or laminated metals in one single piece. They are employed in production and refining process of oil and chemical industries. ring joint gaskets are strictly manufactured to api-6aasme b16.2 specifications. ring joint gaskets shall be either octagonal or oval in cross section and identify by r, rx or bx number that relates to flange size (nps), pressure class and appropriate flange standards.
Ring Type Joint Gasket
Get Price Quote
Stainless Steel Ring Joint Gasket
12 Per Piece
Ring Joint Gaskets
Get Price Quote
Sandco Metal Industries (India) is a prestigious name that holds its market from past 25 years by providing best quality Ring Joint Gaskets and other pipe fittings (stainless steel). Our industry builds a trustworthy relationship with its buyers by assuring them that they are getting premium quality material that is corrosion resistant , greater strength and durable at reasonable cost that have undergone quality check in all key steps of manufacturing process involving-selection of raw material, cutting, heating, forming, welding, inspection and test, coating.Ring joint gasket is machined from solid metal in different shapes using API 6A & ASME B16.20 standards based on the customer personalization with corrosive protection using electroplated zinc or alternate material coating of up to 0.0003” thickness. It is mainly designed for high temperature, high pressure or highly corrosive applications by selecting the most appropriate material and shape. Ring joint gaskets are designed so that it can with stand high assembly loads over a small area, thus producing high seating stresses. This is a high integrity sealing gasket for applications in oilfield drilling, pressure vessels joints, petroleum industry, pipes and valves etc.Ring Joint Gaskets The working of ring joint gaskets can be explained by the axial compressive load causing them to deform and flow to irregularities in the flange grooves that it seals. Ring Joint Gaskets Specification Standards : ASME B16.20 Size : 1/2 NB - 24 NB Gasket Thickness : 3.2mm, 4.5mm, 6.4mm,7.3mm and Costomised Thinkness Pressure - ASME B16.20 150, 300, 400, 600, 900, 1500, 2500 Temperature Range: -400°F to +875°F Maximum Pressure: 2000 PSI High Pressure: 4500 PSI Manufactured Standards: ASME B 16.20, ASME B 16.5, BS1560, ASME B 16.47 A (B), BS EN 1092, DIN, JIS, and NF, etc. Value Added Services : Hot Rolling, Cold Rolling, Galvnizing, Heat Treatment, Tempering, Electro Polishing, Threading, Sand Blasting, Soldering.Ring Joint Gaskets Types : Type R Oval Type RX Type R Octagonal Type BX Type SBX Ring Joint Gaskets WarehouseSandco Metal Industries is a leading manufacturer of Ring Joint Gaskets , we have our own warehouse situated at kalamboli, navi Mumbai, India. We are thankful to our working staff that their day and night efforts made it possible to produce adequate stock of premium quality of Ring Joint Gaskets that qualify world class norms and standards of steel and metal industry.Ring Joint Gaskets LABELLING AND WRAPPINGLabelling & WrapRing Joint Gasketsping is a technology of protecting and differentiating produced goods for distribution, storage , sales and use. Our forged fitting product named as Ring Joint Gaskets is finely marked by using different id no. and colour shades so that it is easy to differentiate between steel grades. We deliver our customers order by using certain wrapping methods like overseas packing (ISPM15), wooden crate etc.Ring Joint Gaskets LOGISTIC DETAILSWe are known in steel and metal Industry field for providing our customers their order within 3-4 working days. If is not in stock then Sandco Industries will notify this situation to our valuable clients and dispatch that order within 2-4 weeks.We also provide a prior detail of product delivery which includes delivery time, date, delivery man name etc, if any change occurs then it’s our duty to inform our customers to avoid any last minute hassle.
Ring Joint Gaskets
Get Price Quote
Ring Joint Gaskets are produced from different solid metal types. They are used to stand high pressure and temperatures and they are employed where corrosive agents are present. These gaskets are obtained by mechanical working from forged or laminated metals in one single piece. They are employed in production and refining process of oil and chemical industries. Ring Joint Gaskets are strictly manufactures to API-6A/ASME B16.20 specifications.Ring Joint Gaskets shall be either octagonal or oval in cross section and identify by R, RX or BX number that relates to flange size (NPS), pressure class and appropriate flange standards (ASME B16.47 or API Specification 6A).
Ring Type Joint Gaskets
Get Price Quote
"RTJ" (Ring Type Joint) gaskets are manufactured in accordance with API-6A and ANSI B16.20 specifications. RTJ's have "R" numbers assigned to them for pipe size and pressure class identification. Stock materials include soft iron, low carbon steel, 4-6 chrome (f5), 304, 304L, 316, 316L, 347, Monel, Inconel and Incoloy. API Ring Joint GasketsAPI Ring Joint Gaskets come in two basic types, an oval cross section and an octagonal cross section. These basic shapes are used in pressures up to 10,000 psi. The dimensions are standardized and require specially grooved flanges. The octagonal cross section has a higher sealing efficiency than the oval and would be the preferred gasket. However, only the oval cross section can be used in the old type round bottom groove. The newer flat bottom groove design will accept either the oval or the octagonal cross section. The sealing surfaces on the ring joint grooves must be smoothly finished to 63 Microinches and be free of objectionable ridges, tool or chatter marks. They seal by an initial line contact or a wedging action as the compressive forces are applied. The hardness of the ring should always be less than the hardness of the flanges. BX and RX Ring GasketsThe BX ring gasket differs from the standard oval or octagonal shape in that it is square in cross section and tapers in each corner. BX can only be used in API 6BX flanges. RX ring gaskets are similar in shape to the standard octagonal ring joint gasket but their cross section is designed to take advantage of the contained fluid pressure is effecting a seal. They are both made to API 6A. Special Ring Type Joint GasketFor critical and non standard applications, where ring type joints are unsuitable in their standard form, FLIPS India Engineering offers a range of specialized ring type joint gaskets to suit the needs of the petrochemical industry. Type R Ring Type Joints with PTFE Inserts Type RX Ring Type Joints with PTFE Inserts Rubber Coated Ring Type Joints Transition Ring Type Joints Blind Ring Type Joints Flange Guards
Stainless Steel Ring Joint Gasket
100 Per Piece
10 Piece(s) (MOQ)
Mechanical Joint Gasket
Get Price Quote
We are offering mechanical joint gasket. Excellent performance longer life ultra durability health safety 100% leak proof seal competitive price & reliable product
RESTRAINED JOINT
Get Price Quote
Gasket materials complies in all respects with physical requirements specified in "ANSI/AWWA C111/A 21.11.00/UL-194/NSF-61" Superior quality synthetic rubber materials like SBR / EPDM. Application : Cast Iron or Ductile Iron Pipe Joint Sealing High Pressure Gasket Restrained Joint Gasket 100% leak proof seal Pipe can accomodate ground movement due to flexible design of the joint Gasket prevents Thrust Force Movement Intermittent jerk of water during use is absorbed by the gas
Ring Joint Gaskets
Get Price Quote
These Ring Joint Gaskets are available in R, RX, BX styles and in oval/octagonal profiles. We are manufacturers in accordance with specific tolerances on CNC machines. These are widely used in the production and refining process pipelines of oil and Gas Industries. These Ring Joint Gaskets fully comply with the ASME B16.20 standard and the API spec 6A requirements. This are suitable for high pressure and high temperature applications. These are manufactured in a variety of standard and special materials.
Universal Joint Gasket
Get Price Quote
Manufactured from a special grade of expanded 100% pure PTFE by transforming the fibrous structure by means of a special process, our range of universal joint gaskets are used as unique sealing material in various applications. Though very tough, these gaskets are spongy and suitable for almost all flanges, covers and narrow cavities. The special soft and flexible characteristics of these gaskets make them ideal seal under pressure without significant cold flow even on irregular, badly damaged or corroded flange surfaces. Once bolted this gasket rarely required to be re-torqued. Physical Properties: Recommended temperature – 240°C to 310°C PH Range 0 - 14 No deterioration due to stocking for long time Non-toxic and resistant to high pressure Not recommended for use against elemental fluorine, alkali metals and strong oxidizing agents Applications:Our Universal Joint Gaskets have found various applications in petroleum refining companies even in their offshore operations, corrosive chemical processing, food processing, paper mill, marine installation, for glass lined or fiberglass reinforced vessels and tank lid sealing, manhole covers, vent pipes, heat exchangers, pumps or compressors housing flanges, valves.
Ring Joint Gaskets
Get Price Quote
Ring joint gaskets are manufactured in different solid metal types such as Soft iron/SS304/316/321 metals and similar other alloys. These ring joint gaskets are ideal for the industrial use due to their enhanced performance and reliable durability. These ring joint gaskets stop leakage that causes corrosion around manholes and hand holes in steam boilers, water heaters and air tanks. The RTJ rings are in profiles of R, Rx and Bx series as per std API 6A.
API CERTIFIED RING TYPE JOINT GASKET
Get Price Quote
Ring Joint Gaskets
Get Price Quote
Ring joint gaskets : carbon steel, soft iron monel® 400 hastelloy b2 & c276 304 316ti nickel 200 copper 304l 310 inconel® 600, 625&x-750 zirconium 316 321 incoloy® 800 & 825 duplex 316l 3cr12 titanium ptfe(inner rings only) sizes :we manufacture ring type joint gaskets of all sizes and shapes flange standards : ring joint gasket can be manufactured in accordance with all relevant gasket standards and specifications to suit the following flange designations api 605 (asme b16.47 series b) asmeansi b16.5 bs 1560 bs 4504 bs 10 din din flanges french nf standard jis flanged mss sp 44 (asme b16.47 ser. Request callback
Ring Joint Gaskets
50 Per Piece
Rubber Ring Joint Gasket
10 Per Piece
Ring Joint Gaskets
Get Price Quote
jeemet steel & engineering company is the celebrated manufacturer, exporter and supplier of a wide range of Ring Joint Gaskets. Made from supreme quality raw materials obtained from our trusted vendors, these high functionality gaskets are ideal for high pressure oil field and process industry applications. These high functionality ring joints gaskets are offered at industry leading prices. Features: • Longer service• Supreme quality• High accuracy
Ring Joint Gaskets
50 Per Piece
Ring Joint Gaskets
Get Price Quote
We Manufacture Premium Ring Joint Gaskets Confirming to R,Bx and Rx Series of Api Std 6a. the Ring Joint Gaskets Provided By Us are Widely Used in the Production and Refining Process of Oil and Chemical Industries. These Gaskets are Manufactured in Different Solid Metal Types like Soft Iron/ss304/316/321 Metal and other Alloy Items. Our Ring Joint Gaskets are Manufactured in Different Solid Metal Types like Soft Iron/ss304/316/321 Metal and other Alloy Items in Order to Meet Varied Requirements of the Valued Clients.
Ring Joint Gasket
Get Price Quote
Ring Type Joints are primarily used by the oil, gas, petrochemical and offshore industries, they are also commonly used on valve, pipe work assemblies and with some integrity vessel joints. Ring type are use to seal flanged connections subject to high pressures and temperatures. These precision made solid metal gaskets form a metal to metal seal with the flanges. The gasket cross-sections are designed to concentrate the bolt load over a small area to produce a high seating stress. The gasket metal should always be softer than the mating flanges. The high seating stress causes 'plastic-flow' of the gasket into the flange faces to create seal. The 'RX' and 'BX' gaskets are designed to be pressure activated by the sealed media which improves the efficency of the seal as the internal pressure of the system increases. Stock materials include Soft Iron, Low Carbon Steel, F5, F11, F9, 304, 304L, 316, 316L, 321, 347, DUPLEX, Monel, NICKEL, 410, Inconel and Incoloy. The Very wide seating stress range (minimum to maximum stress) of the Camprofile gasket makes it SHAPES AVAILABLE Oval shape Octagonal shape
Ring Joint Gaskets
Get Price Quote
We are offering ring joint gaskets.
