Lloydlee Company Kalina, Mumbai, Maharashtra

ELITE E218 SUB FEATURES:   Direct radiating Vented LF enclosure, Solid bass down to 28Hz 2000W continuous, 8000W peak power handling 2 x 18 inch low distortion Italian LF transducers with weather protected cone and plates for outdoor use Very High SPL coupled with clean and precise low frequency Ideal for line array system Compact and easy to transport     The E218 SUB is capable of reproducing superior sound quality and detail of the highest standards. Usable response extends to 28Hz to 250Hz.The E218 SUB can be used as stand-alone or ground stacking multiples for reproducing extremely high levels of sub frequencies. They are ideally suited for any type of line array system and perfect for concentrated bass reproduction for clubs.   The E218 SUB is a dual 18 inch subwoofer with 2000W continuous and 8000W peak power handling. Two powerful four inch voice-coil Italian woofers has been employed to deliver maximum low-frequency and detailed response over the complete usable frequency range. Woofer suspension has been specially designed for maximum linear excursion, incredible fatigue resistance and excellent long-term reliability. The drivers are reflex loaded by ports and substantial internal bracing is employed.     FEATURES Direct radiating Vented LF enclosure, Solid bass down to 28Hz 2000W continuous, 8000W peak power handling 2 x 18 inch low distortion Italian LF transducers with weather protected cone and plates for outdoor use Very High SPL coupled with clean and precise low frequency Ideal for line array system Compact and easy to transport   APPLICATIONS Live Sound Auditorium Houses of Worship Club sound Various Installations

Type : Subwoofer

Weight : 78kg

Excellent audio performance State of the art technology provides exceptional reliability when working with up to    2 ohm impedance Excellent handling of low frequencies as well as clear mid and highs Optimized power supplies, filter and heat sinks for better low end, transparency    and stability Comprehensive protection circuitry (short, overheat, Dc, subsonic and RF filters    turn-on delay) with high current speakers protection relays. Flexible input configuration with active balanced inputs, additional input connectors for easy signal jump. True clip LEDs for better control Front-to-Rear airflow with 2speed fan control Efficient heat sink design for thermal stability and reliability Turn-on in-rush current limiting circuitry Steel reinforced chassis construction for durability and longevity.     KRM amplifiers are very-high-quality power amplifiers designed to elicit maximum performance from any speaker system. Their ultralow distortion and powerful amplifiers ensure that program material will be amplified very accurately. Their superior design and build quality makes them extremely reliable against over-temperatures, radio frequency interference, shorted outputs, spike on power lines and DC faults.   They have been given a vote of confidence by high end audio users around India because of their intense reliability, high level sound and durable design. All KRM amps are geared with unmatched and complete protection and safety package for maximum performance.   KRM amplifiers have sophisticated protection circuits that guard it and the load from problems. Protection circuits guard against overload, over-temperature, shorted outputs, radio-frequency interference and dc faults. The output devices are protected against damage from reverse feeding of electrical energy (back EMF) and are switched on via relays to avoid transients which could damage speakers.   Possible to exchange amplifiers of different power ratings without upsetting delivered sound pressure levels or spectral balances. KRM amplifiers are the choice for serious, professional amplification applications which require optimum sound quality, speaker protection, and the highest level of construction quality and long-term reliability.     APPLICATIONS • Live Sound (Small to Large scale sound reinforcement)• Auditorium• Club sound• Portable Dj systems• Installations

High Output 10 inch LF + 1.4 HF  Inch 2 Way Line Array Speaker System   FEATURES:   Very high output coupled with clean and precise sound reproduction Passive operation. Italian drivers for superior performance and durability 1 x 10 inch 350W high performance mid bass 1 x 1.4 inch compression driver, horn-loaded for power and performance Wide coverage 100° horizontal nominal Fast, Integral, high-strength rigging system Common grid may be used for flying or ground stacking Company pre-sets for a variety of applications     The EDGE X1+ compact line array loudspeaker module is an externally powered 2 – way passive speaker which integrates mid and high frequency transducers in a single unit. X1+ utilizes custom built drivers that provide optimum performance and features line array technology within a compact, user friendly package.   A specailed 10 inch woofer has been employed for the X1+ to ensure smooth mid frequency performance and superb low frequency reproduction. For High frequencies a 1.4 inch exit compression driver is mounted onto a high frequency plane wave converter. The resultant planer wave is then coupled to a high frequency horn that ensures, wide dispersion, precise high frequency coverage and even array performance in all situations.   As a two-way full-range system it can be utilized for reinforcing conferences and seminars as a standalone but for applications requiring low frequency reinforcement it may be combined with the EDGE X18, X28, Elite E118 SUB and E218 subwoofers. Despite the compact size, X1+ arrays deliver both, exceptionally high output capability and predictable pattern control. The Edge X1+ meets the need for a versatile, scalable system that can be setup for corporate events, theatres, indoor and outdoor venue applications, including portable and a variety of install applications.                   HF 1 x 1.4 inch exit HF compression drivers, horn loaded RATED POWER Passive: 350W AES, 1400W peak   LMF: 350W AES, 1400W peakHF: 80W AES, 320W peak

Weight : 22.5 kg

Type : Two-way, compact line array element

FEATURES:   • Worldwide highest output power level and greatest extra headroom• Three or Single* phase very wide range of AC line operation with APFC• Easy interfacing to the 3X 400V** distribution without Neutral connection• Reduced current draw and line cabling cost, saves lots of copper• No more line•to•line balance problems, moreover the amp helps to keepthe best symmetry betweenphase conductors in 3 Phase operation mode• Fault•tolerant to power line anomalies, still operational with 2 phases• Network control over standard ETHERNET, Open Source drivers• Optional DSP module with 24bit/192KHz HiDefinition sample rate• Full soft switching implemented with very high power conversion efficiency• Supercompact size and small weight in rugged 1RU steel case• Easily readable large format display and accurate output level metering     APPLICATIONS • Live Sound (Small to Large scale sound reinforcement)• Auditorium• Club sound• Portable Dj systems• Installations

FEATURES:   – High output power and high efficiency– Advanced high frequency switching technology– Small size, low weight, ideal for touring applications– Networkable amplifier over standard Ethernet– AMPControl software and JAVA based control– All functions can be accessible by remote– Graphics LCD for easy setup and diagnostics– Two JOG button for fast navigating– Digital volume and input sensitivity control– Built-in programmable limiter– Output Peak and average Voltage,Current measuring– Displays actual load impedance– Embedded webserver for set&view parameters by a web browser– Five user profiles– Intelligent protective functions– High frequency resonanat power supply with active PFC function– Wide mains voltage operation range     XE Series professional amplifiers are designed for portable and fixed installations. Five models are available: XE2500, XE4000, XE5002, XE6000 and XE10000. All type have graphics LCD display and two JOGs for tuning system parameters. The devices have internal webserver for full remote control over standard ETHERNET. There are two possible ways to use the remote control functions: with normal internet browser (JAVA based), and with PKNC control software.

Very High Performance 15 Inch LF + 1.4 Inch HF Low Profile Stage Monitor   FEATURES:   Compact low profile multi purpose design Superb frequency response High Gain before Feedback 1000W 15 inch high power Italian Neo woofer 100W 1.4 inch exit pure titanium, large format compression driver Weather protected components and Wear resistant ergonomic cabinet Design for out-door use Vented LF enclosure, bass down to 50Hz. Mount for tripod use   The EDGE XM15+ is an exceptional stage monitor designed to exceed the expectations of the most demanding performers and engineers. This low-profile, high output stage monitor exhibits a smooth response, high gain before feedback, remarkable vocal clarity and very high SPL in an extremely compact design.   High frequencies are reproduced by a large format Italian 1.4 inch exit compression driver that’s coupled to 80º x 60º horn. This exceptional design provides a consistent frequency response and SPL at the optimum height, allowing the performer to move around the stage without any drop in response or power. Low-mid frequencies are reproduced by a high efficiency, high power handling 15 inch Italian neo woofer featuring a 4 inch voice coil and weather protected cone for outdoor use. The XM15+ is a monitor which is also designed to be used as a side-fill or FOH speaker when mounted on a stand.   To create a musical performance, two things have to happen: your audience needs to hear you, and the performers need to hear themselves. If the performers can’t hear themselves clearly, how will they know if they are playing or singing well ?   Stage monitoring is taken very seriously by top professionals and should be by anyone working right from the concert level down to club gigs. Good monitoring consists of having the right equipment, suitable for the nature of the venue, performance and operating it effectively. Lloyd Lee Company therefore developed the EDGE XM15+ as a solution to the many challenges faced by performers and engineers in the live sound industry.     APPLICATIONS Live sound, Auditorium, theatres. Main Vocal Monitor High Output Monitor For Drums and Keyboards Front Fill Stage Fill.

Type :  Two-way compact (full-range)

ELITE E215 PRO High Output Dual 15 inch LF + 1.4 Inch HF 2 Way Full-range Loudspeaker   FEATURES:   Two-Way High-Output Full-range E215pro 1200W continuous, 4800W peak power handling 1.4 inch exit compression driver for high power and  Precise vocal reproduction 2 x 15 inch LMF transducer with weather protected cone and plates for outdoor use Advanced crossover with HF protection Unique elliptical 80° x 60° Constant-directivity horn Vented LF enclosure, Solid bass down to 45Hz   The E215pro is designed for medium-throw PA applications, side fills or drum fills. E215pro excel where all other dual 15 inch loudspeakers fall short on-power and detail.   The E215pro are an excellent choice when the application calls for high performance and simplicity. A pair of E215pro and a single, high-power amplifier is a complete sound system capable of reinforcing bass and kick drum or playing high-level music in clubs and other venues. The E215pro can be combined with E218 subwoofer for incredible full range sound.   The E215pro is a dual 15 inch Full-range speaker system that employ two high power Italian 15 inch woofers which deliver excellent mid-range clarity and low frequencies with exceptional reliability. A specially designed crossover network integrates the 15 inch speakers to a high power 1.4 inch large format driver.   The driver is coupled to a unique elliptical 80° x 60° Constant-directivity horn for smooth and even coverage. HF overload protection is provided for reliable, long term operation. The 60° coverage angle of the E215pro is wide enough to provide coverage of an audience when used one-per side yet narrow enough to allow splaying of multiple enclosures without excessive coverage overlap.     FEATURES Two-Way High-Output Full-range E215pro 1200W continuous, 4800W peak power handling 1.4 inch exit compression driver for high power and  Precise vocal reproduction 2 x 15 inch LMF transducer with weather protected cone and plates for outdoor use Advanced crossover with HF protection Unique elliptical 80° x 60° Constant-directivity horn Vented LF enclosure, Solid bass down to 45Hz   APPLICATIONS • Live Sound• Auditorium• Houses of Worship• Club sound• Various Installations

FEATURES:   High performance two-way full-range line array system. Very high output coupled with clean and precise sound reproduction Passive operation. Italian drivers for superior performance and durability 12 inch 700W high performance woofer in bass reflex design 1 x 1.4 inch compression driver, horn-loaded for power and performance Wide bandwidth and Extended bass response Wide coverage 110° horizontal Fast, Integral, high-strength rigging system Company presets for a variety of applications.     As a two-way full-range system it can be utilized for reinforcing conferences and seminars as a standalone but for applications requiring low frequency reinforcement it may be combined with the Elite E118, E218, EDGE X18, X28 and LF1+ subwoofers, extending the range to 28Hz.   The EX12 incorporates proprietary rigging systems on their sides for safe, easy and quick flying or stacking. simple connection of enclosures and optional array frame angle allows arrays of up to maximum of six enclosures to be flown. The EX12 trapezoidal shape and side located splay angle adjusters maintains the front spacing the same, providing the array with a continuous front baffle, for improved array performance.   Despite the compact size, EX12 arrays deliver both, exceptionally high output capability and predictable pattern control. The Edge EX12 meets the need for a versatile, scalable system that can be flown or pole mounted for corporate events, theatres, indoor and outdoor venue applications, including portable and installed. It is also suitable as a delay system for large scale outdoor sound reinforcement. The enclosure size, shape, weight and rigging are optimized for ease of transport and handling. Arrays may be easily flown or ground stacked.   The ELITE EX12 is a compact passive 2 way line array loudspeaker module passive speaker which integrates mid and high frequency transducers in a single unit. EX12 utilizes world class Italian drivers that provide optimum performance and features innovative line array technology within a compact, user friendly package.   Mid-bass frequency reproduction is handled by single 12 inch 700W Italian woofer in bass reflex configuration. This high power and high excursion 12 inch woofer has been specially built for the EX12 to ensure punchy low-frequency and superb mid frequency performance. For High frequencies 1 x 1.4 inch exit custom built compression driver is mounted on to a high frequency plane wave converter. The resultant planer wave is then coupled to a proprietary high frequency horn to ensure, wide dispersion, precise high frequency coverage and even arraying in all situations.     APPLICATIONS Ideal for a wide range of portable and installed applications Small to Medium scale sound reinforcement Concert Halls, stadiums, auditoriums, Club sound

Weight : — kg

ELAN MH7+  Very High Output 2x 12 Inch LMF + 1.4 Inch HF, Horn Loaded Mid High Speaker System   FEATURES:   Very high acoustic output for very compact enclosure 8 ohms mid and high frequency transducers 2 x 12 inch high performance mid-section 1 x1.4 inch exit high efficiency compression driver selected for extended and precise high frequency performance Long throw capability 60°H x 40°V coverage pattern   The horns and drivers were designed as part of the LF7 development and represent a step forward in state-of-theart loudspeaker design in terms of high acoustic output. The mid-bass phase plug provides optimal loading for the 12 inch driver, delivering smooth response and extended efficiency up to 2000Hz. This combination results in improved vocal intelligibility and clarity with a smooth response from the lower-to-mid vocal range.   The MH7+ possess excellent throw and coverage like the famous MH3 loudspeaker, along with further enhancement in driver technology for higher power handling. The MH7+ can be used with various subwoofer combinations (LF1+,LF3+,LF5+ and LF7+ subwoofers) due to its powerful mid-high performance and wide bandwidth.   The MH7+ was designed as compact, array able mid-high system for large scale sound reinforcement. The MH7+ is flexible enough to work superbly in both 3-way and 2-way configurations.   The MH7+ is a far throw, compact 2-way mid-high system in a trapezoidal enclosure with a 60° H x 40° V coverage pattern. Two Italian custom built 12 inch 8 ohms mid-bass transducers are coupled to a 1.4 inch large format high frequency compression driver. The system has been optimized to array efficiently with each other, creating seamless coverage zones from any size cluster.   APPLICATIONS Live Sound (Small to Large scale sound reinforcement) Auditorium Houses of Worship Club sound Concert Halls Stadiums

Type :  Two-way mid high horn loaded

Weight :  71 kgs

  FEATURES:   Small size, lightweight 4 channels amplifier Worldwide operational range of mains voltage Output power and sound quality are independent from Mains changes in very wide range (85Vac — 275Vac) Strong double resonant power supply with PFC High output power and good pulse response Built-in U / I / no-clip limiters Bridged configuration ability High power conversion efficiency ,low thermal emission Improved reactive power handling/recycling capability 2way selectable fixed frequency hi/low-pass crossover Intelligent protective functions Two steps of built-in High frequency protection Soft-start, line overvoltage protection, 400VAC proof Large internal energy storage Cooling fans are hidden deep in the case, less noisy Rugged steel chassis in compact size No need for cooling air jamming filters, non moisture sensitive cooling structure design, “Tropicalized” Designed and manufactured in the European Union (HUNGARY)

ENIGMA 26+ High Sonic Performance 2-IN/6-OUT Digital Loudspeaker Processor   ENIGMA26+ is a complete integrated tool that allows all aspects of loudspeaker management for public address system applications. Designed to be provided for any crossover configuration, it offers 2 analog inputs, 1 digital input and 6 analog outputs, managed by a powerful DSP Engine in addition to 24 Bit AD/DA Converters.     Each input channel provides noise gate function, Automatic Gain control, configurable Delay, a choice of EQs, selecting either a 7-band parametric EQ or 15-band graphic EQ. It also includes a 7-band Feedback Eliminator and a powerful Sub Harmonic Synthesizer. Each output offers up 4-band of parametric equalization, in addition to the crossover filters which themselves provide slopes from 6dB/Octave up to 24dB/Octave. Each output path also features RMS compressor, Peak Limiter and configurable Delay.

CH-1000 is a three phase, direct control 1 ton chain hoist and the CH-500 is a single phase direct control 500kgs chain hoist. Both hoists are designed and built to withstand the rigorous entertainment rigging environment. The CH 100 and CH 500 hoists are compatible with most existing direct control hoist controller and operate in both upright and inverted positions. Fit for various workplace applications, factories, warehouse, construction, and industries.It has been specially designed for unique lighting grid, trusses, audio equipment’s and various other applications in the entertainment industry. The CH-500 Operates on 110V- 120V or 220V-230V, which means you, can plug it in just about anywhere.