Metal Products Dealers in Andheri West, Mumbai (221 products available)

• Material: Noble Alloys
• Color: Grey
• Features: Accurate composition,Enhanced purity,Withstand high temperatures
• Usage/Application: -Additives for making special steel & flux-cored wire
• Item Code: FT1

We are offering fiberglass cable widely used in heating products ,heaters,smelters,klins,electric motor etc.

Copper milberry wire 99.9% purity.Payment 100% LC at sight.Cheapest Prices, Best Quality.

The main function of a cylinder liner is to serve as the inner wall of a cylinder, which then acts as a sliding surface for the piston ring while ensuring the retention of lubricant within it. A cylinder liner is also known as a cylinder sleeve which is a replaceable metal sleeve aligned within the cylinder to a form a surface which can withstand the wear and tear from the piston. Cylinder Liners – Sleeves, made of grey cast-iron, ought to have desired casting and machining qualities, viz. strength, toughness, hardness and wear resistance. These are mainly of two types – Dry liner-sleeves and Wet liner-sleeves. The liners-sleeves are ‘cast-in fit’, force (press) fit or slip fit. The interference between its outer diameter and bore-hole walls depends on fit-type from 0.050 to 0.075 mm. These are available in wide range suitable for light, medium and heavy duty application.At Garima Global, Cylinder Liners are manufactured using the best method i.e. Centrifugal Cast Process. In this process, the molten metal is poured into a mould revolving at a very high speed, and because of the centrifugal force the impurities are separated easily. This centrifugal force also causes the molten metal to spread evenly across the mould, thus resulting in castings which are of finer grain and free from porosity. 

• Type: Pvc Coated Wire
• Color: Black, Grey, Multicolor
• Insulation Material: PVC
• Coating: Pvc Coated
• Standard: JIS
• Conductor Type: Solid

Pvc coated galvanized binding wire is use for binding of fusion bonded epoxy coated (green) tmt rebar and regular tmt in construction. As we all know using of m. S .wire or galvanized binding wire & regular m.s. Tmt barrod easily decorates & corrodes in cement due to the chemical content in cement, especially in coastal areas.

Concertina Wire made from Central Core of High Tensile Wire around which a tape of sharp barb is mechanically impose. High Protective property of it allows effective fencing around various civilian.

• Country of Origin: Malaysia
• Size: 20x3inch, 25x4inch, 30x5inch, 35x6inxh
• Type: Aluminium Ingots
• Material: Aluminium
• Shape: Rectengular, Square
• Weight: 1-100kg, 100-200kg, 200-300kg
• Grade: AISI, ASTM
• Color: Brown, Golden, Grey, Metallic
• Purity: Sn99.95%, Sn99.99%, Sn99.995%
• Condition: New, Used

• Material: Aluminum
• Type: Sheet Bending and Rolling
• Application: Industry, Roadside, Stations etc.

•  : No. : 7784-45-4
• EC No. : 232-068-4: Molecular Weight : 455.64 g/mol
• Molecular Formula : AsI3: Structural Formula
•  : Appearance
• orange-red crystalline solid: Density
• 4.69 g/cm3: Melting Point
• 146°C: Solubility in Water
• 6 g/100 mL: Also known as

• Material: Steel
• Thickness: 6-150mm
• Material Grade: 516/70, 516/60
• Width: 1000-4500mm
• Size: 2500 X 12000
•  :  

• Material: Metal, Pure Metal
• Pattern: Plain
• Shape: Rectangle
• Weight: 400 g

• Core Colors :: Up to 4 cores. Black with white numbering + yellow/green
• Sheath Colors :: Gray, black and white
• Conductor :: Annealed bare copper as per IS: 8130

Suitable for interconnection of electrical measuring devices to instrumental panel or instrument. Also for measuring, monitoring and control in machine tool manufacturing in plant engineering. in places where interference field can distort a signal transmission or where interference pulses arising in the mains must be confined.

• Color: Black
• Item Code: GPF-N-660
• Production Capacity: 5MT
• Brand Name: Cabot,Philips,Russian,Himadri

N 220, N330, N375, N550, N650, N660, N772

On the platform of Shradha Exports we have diversified products portfolio for Dry & Wet Cylinder Liner and sleeves for Various automobiles like TRUCKS, TRACTORS, EARTHMOVERS, COMPRESSORS, CARS AND DIESEL ENGINES moving around the world. We are also well experienced and technically qualified to produce highest shell moulded air cooled blocks. We supply liners & sleeves manufactured in centrifugal casting machines with pre adjusted centrifuge speed, cooling rates, pre set pouring temperature maintained through induction furnaces. Technical terms likes accurate cross hatch angle, correct taper, plateau honing & bore topography made us the global player with size capacity ranging from 60 mm to 158 mm bore diameter. Quality Assurance Facilities are elaborated below.Spectrometer Test – Online testing for chemical composition for consistency at each and every heat. Optical Microscope Test – to ensure Graphite type & matrix as well as the flake sizes and free ferrite percentages. Hardness, Tensile and Compressive Test – to ensure the structural strength. Surface Roughness & profile test – for better wear resistance and longer life. With monthly capacity of 100,000 Pieces we bring out the best products with attractive packing.

products   spirit closures wine closures pharma closures olive oil closures printed sheets printed metal sheets printed metal sheets' are the raw material for manufacturers of aluminium bottle caps (ropp closures) and metal containers/cans. the group has large metal procuring and handling capacity thereby we are able to cater to different needs of different customers. the production of printed metal sheets are conducted at our 5 printing factories and cater to both domestic and international customers. the printing machines are available with both conventional and uv curing options. specification and application: printed aluminium sheets: alloy: 8011 temper: h14 and h24 thickness: from 0.15mm to 0.23mm (± 0.01mm) decoration: multi-colour printing with special internal lacquer systems application: to manufacture ropp closures for spirits, wine, pharmaceutical and olive oil closures printed tinplate/tfs sheets: temper: t1 to dr8 thickness: 0.15mm to 0.30mm finish: bright and stone decoration: multi-colour printing with application specific lacquer systems application: to manufacture twist-off caps (lug caps), crown caps (beer bottle caps), 3-piece general line cans for paints, 3-piece food cans, 3-piece beverage cans .

Our company is a reputed Supplier of Alloy Steel. We are capable of meeting bulk requirements for Alloy Steel with ease.

Polyester Enamelled : IS 13730 : Cross Sectional area 3 to 75 Sqmm Rectangular Copper Wire : IEC 60317 : Width 3 to 20 mm Class 155 : Part - 16 : Thick 1 to 5 mm