Promas Engineers Private Limited Rabale, Navi Mumbai, Maharashtra

  • Vibro Sifter

    Vibro Sifter

    Request for Price

    Single deck and double deck vibrating screen with without dust cover in SS 304 / SS 316 / GMP construction. Complete Assembly is mounted on fabricated base & isolated by means of specially designed springs. Vibrating assembly is fitted with vibratory motors. Motors are designed for continuous operation. We are located in Navi Mumbai,Maharashtra and operating as manufacturer, supplier and exporter of double cone octagonal blenders according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and entire world.  

    ...more
    Get Best Price
  • Vacuum Tray Dryer

    Vacuum Tray Dryer

    Request for Price

    ge from 3 trays to 96 trays Application: Used for drying of high grade temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances which are dried to very low residual moisture content levels. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. We are manufacturer, supplier and exporter of vacuum tray dryer as per ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the globe. Working Principle Vacuum Tray Dryers Vacuum tray dryer is the most commonly used batch dryer. They are either box – shaped or cylindrical shaped loaded and unloaded via a door. Inside are several heating plates mounted one above the other on which the product is placed in trays .The Top of both heating plates (Shelves) and the bottom of heating shelves trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam, or thermal oil. The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To avoid retrograde condensation, the cabinet walls are indirectly preheated by limpet coil provided on the outer side of the body (Optional). Only after all the product trays reach the same temperature, the cabinet is evacuated and drying can start. (The preheating phase is very important in order that the drying curve and the foaming of product are identical throughout the cabinet). During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuum of only few mbar abs are reached. The vacuum can be controlled through PLC in order to reduce the drying cycle. Nitrogen can also be purged in the VTD according to the product.

    ...more
    Get Best Price
  • Sigma Mixer

    Sigma Mixer

    Request for Price

    Capacity: 3 Ltrs. to 2000 Ltrs. Application: Promas Engineers offers sigma mixers are ideal heavy duty mixer which can be used in Explosive / Chemical as well as Food processing industry. We are manufacturer, supplier and exporter of sigma mixer according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Working Principle Sigma Mixers The bowl is made of heavy steel plate making it a rugged heat proof unit. This is especially useful for bulky material and additional thinning prior to discharge. Tangential blades are supplied with differential speeds. Heavy duty machine cut spur gears are provided. Spherical type bearings are provided at both the ends to suit both radial and thrust load. Gland type shaft seals are fitted at both the ends for easy maintenance. Bowl is provided with jacket for temperature control and adoptable for cold water or brine or hot water, steam etc. Mixers can be designed for vacuum operations. Sanitary construction is provided for food and pharmaceutical procedures. Manually operated discharge system is provided for lab models and motorised discharge system is provided for plant models.

    ...more
    Get Best Price
  • Rotary Double Cone Vocuum Dryer

    Rotary Double Cone Vocuum Dryer

    Request for Price

    Capacity: 5 Litres to 5000 Litres Application: Rotary double cone vacuum dryers are suitable for drying & mixing powder (raw materials), pharmaceutical materials, crystalline products, insecticides, pesticides, food products & also for heat sensitive products. The equipment can also be used as rotary evaporator. Promas Engineers is a certified company for manufacturer, supplier and exporter of rotary double cone vacuum dryers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Working Principle Rotary Double Cone Vacuum Dryers Raw material is charged in batches & is subjected to indirect heating while at the same time undergoing rotary motion of the cone assembly. The conical shape of the dryer ensures efficient circulation of hot liquid heating media. Drying takes place when heat flows from outer cone through a jacket, and vacuum is applied in the inner cone. The drying operation is based on the principle that water or other volatile product moves from a zone of low pressure. This is accomplished by warming the product to be dried to raise the vapour pressure of the absorbed or free liquid by vacuum or by sweeping it with Air or Nitrogen current. Thus the essential conditions for effective drying are achieved by uniform heat transfer throughout the batch and rapid removal of the vapour. The vacuum is applied gradually with PLC control by throttling.     Promas Engineers Rotary Double Cone Vacuum Dryer is unique in removing complete water, or other solvent from wet powders coming from a filtration unit or a centrifuge. It can be used as an effective dryer, fast mixer & blender or homogenizer. It can also be used as a granulator. The drying time is substantially reduced because of high-speed choppers, which help the evaporation of the solvent or moistures. Chopper speed can be controlled by a frequency drive. Dryer are manufactured as per “US-FDA” Standards & Regulations. Salient Features Rotary Double Cone Vacuum Dryers Low temperature drying under vacuum Higher Thermal Efficiency Specially designed micro air-filter can be provided on receiver while breaking vacuum for safety operation Nitrogen purging system is available optionally for mechanical seal as well as for cleaning filter Specially designed S.S. Rotary union is provided for hot water or steam at inlet & outlet Direct drive with hollow shaft gear to suit cGMP operation & to avoid greasing of the gear. The gear box with only one time of oil fill for lifetime Lowest energy consumption compared to any other batch type dryer due to higher differential temperatures Available in STD/GMP/cGMP/ Lab Models and kilo lab models Why RCVD? Suitable for drying of materials which cannot resist high temperature. Material which are easily oxidized Specialty chemicals Volatile Materials which should be retrieved Materials which are strong irritants and poisonous in nature Solvents which need to be recoverer Advantages: Reduces drying time. Total contained process, dust control. Efficient Charging and Discharge. Choppers (Lump Breaker) give lump free product. Easy Open-able charging port. Eliminates need for re-drying of lumps. Handling and exposure of final product is avoided. Gives uniformity size dry product. System can process crystalline or amorphous powders which are prone for lumps. Easy to clean internal surface, thus ensuring purity of product. Optimum and Continuous vacuum maintenance during process. Uniform material shuffling over the heated contact surface of the cone.

    ...more
    Get Best Price
  • Rapid Mixer Granulator

    Rapid Mixer Granulator

    Request for Price

    Capacity: 5 kg to 1000 kg M.O.CSS 304/316 Application: Rapid Mixer Granulator is an ideal mixer for pharmaceutical, chemicals and food products, including aqueous and solvent granulation, wax granulation, dry mixing and wet granulation. Promas Engineers is well known organization for manufacturer, supplier and exporter of rapid mixer granulator according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Working Principle Rapid Mixer Granulator Spinning of material closed to the bottom of the mixing bowl and chopper blade sets the entire mixing in whirling and tumbling motion. Chopper blade assembly breaks the lumps formed during mixing. Different type of chopper blades provided for various applications. Salient Features GMP Model with SS 316 contact parts. Electrical control panel consisting of switch gears, fuses, motor starter, push buttons, ammeters, indicating lamps, pressure switch etc. all enclosed in stainless steel sheet metal panel and mini PLC that shows operation in progress with MIMIC. Granulating blade horizontally rotating at high speed for intense mixing. Mixing blades 4 Numbers for intense mixing. Pneumatically operated bottom side discharge valve. Complete unit is mounted on rigid structure covered by S S Sheet.

    ...more
    Get Best Price
  • ploughshare mixers

    ploughshare mixers

    Request for Price

    Capacity: 100 Ltrs to 5000 Ltrs Application: Ploughshare mixer is mainly used for processing of powder, granulates, grains, fradgile material, viscous products & cement concrete materials. We are manufacturer, supplier and exporter of plough share mixers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Working Principle Ploughshare Mixers This is a horizontal mixer consisting of a horizontal, cylindrical container enclosing plough shaped mixing elements mounted on a horizontal shaft. The mixing effect is increased by separately driven, high speed rotating choppers or multiple choppers, which in cooperation with the plough shaped mixing elements, disperse the lumps and agglomerations or pasty additives with the powdery carriers. These Mixers can be provided with liquid feeding devices, jacket for heating / cooling, choice of seals, vacuum suitability for drying and varied material of construction (like mild-steel, stainless steel, Hastealloy, Monels) to suit the process materials. The Mixer is also provided with solvent recovery system.

    ...more
    Get Best Price
  • Planetary Mixers

    Planetary Mixers

    Request for Price

    Capacity: 3 litres to 2500 litres Application(For dry & Dough Mixing): Planetary mixers are an ideal mixer for the products of different viscosities, densities, shapes & proportions. The major uses include the production of latexes, dispersion & micro – dispersion of Chemicals, Explosive & agricultural pesticide formulations. It is suitable for mixing / blending powders as well as through mixing of ointments, creams, lotions, toothpastes, resins, slurries, ceramics, colors, pigments, rubber & other compounds. Working Principle Planetary Mixers Planetary mixers consist of a single or double blade with a high speed dispersion blade (Emulsifier / Homogenizer). Intimate & homogeneous mixing of products is achieved by planetary motion of beaters & centrally located high speed dispersion blade for vacuum jacketed mixer units. The PLM consists of two open beaters moving in planetary motion, scraper blade & centrally located high speed homogenizer run by a separate motor to manufacture ointments. creams. suspensions etc.     Emulsifier / Homogenizer It is a stator-rotor High shear. High speed, & high power mixer are the main characteristics of this stator-rotor mixing device. The high shear action creates a forced product flow. The interchangeability of homogenizer blades is possible to suit the mixing requirements of various products. They are used in many process operations like Homogenization, Dispersion, Emulsification, Grinding , Dissolving, Chemical reaction, Cell disruption & Coagulation.   Salient Features Provision to mix Products under vacuum for de-aeration purpose. Teflon scrappers are provided to avoid localized heating or cooling & ensure uniform mixing. Top drive & agitator assembly can be lifted & lowered by motorized as well as hydraulic systems. Smaller version of planetary Mixer is Provided with a manual lifting arrangement for the bowl instead of top drive & agitator assembly. Pneumatic system is also available for lifting & lowering top drive & agitator assembly for smaller version of Planetary Mixers. Different designs of beaters are available to suit the mixing requirements of wide variety of materials. The laboratory model of the PLM mixer with Homogenizer is also available in batch sizes of 2 litres to 5 litres with various types of mixing blades. Promas Age Over The Other Manufacturer, supplier and exporter of planetary mixers including single and double blades since 1990 from Mumbai to India and entire world. Promas engineers is approved by Indian Defence ordnance factories and explosive chemicals manufacturer industries. For discharge of high viscous material plunger systems is provided. PLM WITH SCRAPEER PLM LAB MODEL 5 Litres PLM PLUNGER SYSTEM

    ...more
    Get Best Price
  • Nitrous Oxide Gas Plants

    Nitrous Oxide Gas Plants

    Request for Price

          You will never experience long and tiresome communication lines if you are in need of support because a Promas Engineers representative is never far away. Our local sales and service staff can help you solve any problem that might arise. They can design new solutions and in cooperation with you extend your production facilities further. Promas Engineers continues to assist you during start-up and training of your employees to operate and maintain the machinery all as part of a complete after sales support programme that spans the entire globe. Nitrous oxide gas plants are design according to client’s suggestions and requirements. We are authorized dealer, manufacturer, exporter and supplier of nitrous oxide gas plants from Mumbai, India to all over the world with assured quality and safety.You will always experience swift delivery of any spare parts. Standard spare parts are available in stock, and special parts can be made to order. This ensures high production safety, less downtime, maximum lifespan of existing components and continuous upgrades to the very latest components.       Years of manufacturing experience combined with great attention to detail guarantee the superior quality that today has become the hallmark of alt Promas® equipment. Our primary goal is to design, supply, service and support solutions that perfectly match your needs. Our engineers ensure that all the technical aspects of installation and start-up run smoothly. They also guide your key personnel through a basic training programme.Promas Engineers services agreement promises complete peace of mind including yearly inspections and regular on-site maintenance.      

    ...more
    Get Best Price
  • Multipurpose Solvent Extraction Units

    Multipurpose Solvent Extraction Units

    Request for Price

    Creating innovative and cost effective designs as per your requirement to give you maximum and best output from our equipment Providing Lab Models in exactly the same material to give the accurate results Design and supply of entire turnkey projects at any scale, from 500 kgs to 20,000 kgs capacities.

    ...more
    Get Best Price
  • Multipurpose Reaction Assembly

    Multipurpose Reaction Assembly

    Request for Price

    Capacity: 10 litres to 20,000 litres Application: To conduct various types of reactions multipurpose reaction assembly like esterification, etherification, nitration, alkalisation, hydrolysis, hydration, dehydration, sulphonation, reduction, oxidation under alkaline conditions, condensation, polymerisation etc. We are certified manufacturer, exporter and supplier of multipurpose reaction assemblies as per the client’s requirements and need since 1990. Working Principle Multipurpose Reaction Assembly The unique design allows the following unit operations to be conducted efficiently. Solvent recovery, distillation, liquid-liquid extraction, phase separation, dissolution, de-emulsification, heating, cooling, blending, degassing, flash distillation etc. Efficient condenser allows complete condensation of vapours and minimises losses. The subcooler, receiver and vapour trap facilitates recovery of all the material by distillation under reduced pressure. The limpet and the internal coil is provided for cooling as well as heating. The system is designed to facilitate conducting reactions under auto pressure / reduced pressure / under inert atmosphere under subzero temperature as well as temperatures up to 300 C.

    ...more
    Get Best Price
  • Multi Mill

    Multi Mill

    Request for Price

    capacity: 1hp, 3hp application: multi mills can be used widely for wet & dry granulation, pulverization etc in various type of applications such as pharmaceutical, cosmetic, dyes, colours, food products, spices, detergents, insecticides, plastics & resins fertilizers etc. We are manufacturer, exporter and supplier with iso certification and international guidelines. working principle multi mills it operates on the principal of variable force swing beaters having knife and impact edges rotating within a selected screen to get the required size reduction. Material fed in the hopper, goes down to the processing chamber where it moves to the periphery and passes through the screen radially and tangentially. Finally the processed material gets collected in the container, which is kept below the processing chamber. s.s. Perforated screens that can be provided.(a) 0.5, 1.0, 1.5mm hole dia.(b) 2, 3, 4, 5, 6mm hole dia etc. s.s. Wire mesh sieve(a) 4, 6, 8, 10, 12, 14, 16, 20, 24, 30, 40, 50, 60(b) 80, 100 mesh. castor wheels are provided for easy mobility. direction of beater can be changed by reversible switch for knife edge & vice versa. available in std / gmp / cgmp & lab models. beaters / scraper blades are hardened for specific application

    ...more
    Get Best Price
  • Manual Jet Mill Micronizer

    Manual Jet Mill Micronizer

    Request for Price

    Capacity: 2″ to 12″ Model available: Pneumatic bag shaking model Reverse pulse jet model For isolator application For containment application Application: Jet Mills are widely used in the manufacture of drugs and pharmaceuticals, organic and inorganic pigments, optical brighteners, fluorescent pigments, food colour synthetic dyes, metal (except malleable metals) carbides & borides, herbicides and pesticides, ceramic glasses, alumina, feldspar, frit, kaolin, mullite, electronic grade materials such as materials required for semiconductors, phosphors, photo electronic, high temperature critical materials and rocket solid fuels etc. We are manufacturer, supplier and exporter multiple variety manual and fully automated jet mill micronizer, micro pulverizer and spiral fluidize air with industrial requirement. Working Principle Jet Milling is a concept of feeding of the powder particles into a flat circular milling chamber and subjecting the same tangentially with pressurized air or nitrogen through a venturi. The Powder Particles are accelerated in a spiral movement inside the milling chamber by number of angular holes in a ring and placed around the periphery of the chamber.The heat sensitive and low melting point materials are easily micronized. Micronizer takes place due to the collision between the incoming particles and the particles, which are already accelerated into the spiral path, The larger Particles of the product get retained at the periphery of the chamber by centrifugal force and the smaller particles exit with the exhaust air from the central portion of the chamber.The material can be milled to an average particles size of 0.2 to 5 micron or coarse ground to 400 mesh depending upon characteristics of the product. The milling action of the particle is because of the high velocity of air / gases instead of pins, jaws or hammers and because of this heat does not get generated during milling. The adiabatic expansion of compressed air takes place with the resultant cooling effect. The heat sensitive and low melting point materials are micronized without use of freeze grinding method. Particle Separator The particle size distribution is controlled by adjusting pressure and feed rate. The particles are trapped by specially designed cyclonic separator and finger-bag made of non-woven PTFE coated cloth without risk of fibre contamination. The dust separator and collector are cylindrical and are having sanitary clamp for quick accessible connections. The system is without reverse jet so as to save air / gas consumption. With the finger-bag shaking arrangement, the bag is automatically cleaned with a set time interval. We also provide high-efficiency dust separator combining inertial and static effects with membrane filter cartridges, reverse-pulse, automatic cleaning and final safety HEPA filter that exhausts clean air to the atmosphere. Fully automated and manual jet mills are mounted on an ergonomically designed portable stand with multiple options micronizer, micro pulverizer and spiral fluidize air. Advantages The micronizing of the powder improves absorption capacity of the drugs in the human body. This also results in new and unusual chemical and physical properties relating to suspendability, solid-state reaction rate, texture, colour, absorption etc. The surface area achieves increase in potency of drugs, which reduces the dosage of the drugs. Product of 30 mesh size when jet milled to 5 micron, has more than 160,000 particles & surface area increases more than 115 times. This results into faster reaction time for chemicals, faster ignition time in the case of solid fuels of rockets. The Jet Milled pesticides & herbicides cover much more surface area using less of the active ingredients, thus reducing the cost. The polishing powders used for polishing the lenses, computer hard disc or in toothpaste are required to be a narrow particle size distribution for maximum productivity. The abrasives used in these polishing powders are very precisely milled. Any cosmetic product requiring silky smoothness in application can be achieved in Jet Mill. The reflectivity of light occurs when the particle size of the pigment approaches a precise relationship to the wavelength of visible light. Therefore by controlling the particle size, the product quality & its brilliance can be ascertained. Jet Mill versions are sanitary, Indian FDA and US-FDA accepted designs, in line with GMP practices and in accordance with all pharmaceutical specifications worldwide. The Jet Mills manufactured by us have replaceable internal rings with optimized grinding angles for various products. The design & construction of Jet Mills are the result of many years of dependable, uninterrupted service. Optional Promas Engineers Jet Mills can be supplied along with following options Electronic motor controller allowing stepless regulation of feeding speed across the specified range and features current limiting to prevent overloading Batch validation equipment including 4-20 mA pressure transducers and process recorder to document each event Vacuum compensation system that avoids Environment contamination in case of blowbacks Replaceable internal linings include PTFE, polyurethane and hard internal alloys etc Synoptic and LCD – alarm display with fault message High precision, electronic pressure controls that monitors the micronizer proportional pressure regulator PLC system Explosion proof 10 bar pressure with rupture disc Ideal for Isolator/containment application THE FEEDING SYSTEM: We provide two types of feeding system along with the Jet Mill in accordance to the properties of the products. Vibratory type feeder : The system is more preferred by the pharmaceutical industries as it being mounted on the main platform and without bolting so as to remove it easily for cleaning. The trough of the unit is fully covered by a transparent cover. The feed rate is controlled by adjusting the vibrator to get more accurate feed rate. Screw type feeder : A twin shaft feeder, volumetric type, with concave profile, with self cleaning screws that able to break the agglomerates and ensures an accurate feeding of poor flowing products. The speed controlled by a step less, mechanical variator.

    ...more
    Get Best Price
  • Horizontal Filter Press

    Horizontal Filter Press

    Request for Price

    Application: We are manufacturer, exporter and supplier horizontal filter press with multiple features. The range of SS Sparkler type Filters ensures precisely the right filtration characteristics for all application in chemical, pharmaceutical, beverages, distilleries & food industries. Horizontal filter press machines are designed and manufactured as per ISO guidelines and international specifications. Working Principle The equipment consists of S.S shell and top cover using bolts to give pressure tight enclosure inside which there is a filter cartridge assembly comprising of several horizontally arranged disc type Filter Plates complete with filter media, with perforated supporting screen and interlocking screens. The entire assembly is complete with pump and pumping connection which is usually mounted on a suitable trolley.

    ...more
    Get Best Price
  • Fluid Bed Dryer

    Fluid Bed Dryer

    Request for Price

      Capacity: 5 kilograms to 300 kilograms Application: To dry material by fluidisation with hot and or dehumidified air. Working Principle of Fluid Bed Dryers The atmospheric air is sucked in the dryer through 5/10 micron filter by an efficient dynamically balanced fan driven by an electric motor. The clean air then passes over the electric heaters steam or oil radiator provided with temperature controller. The hot air passes through the product and fluidisation dries the product. Dryer is provided with dehumidifier (Chilled water system) at the inlet of the dryer so as to dry the product at low temperature under fluidized condition. The blower speed is controlled by A. C. frequency drive so as to control the fluidisation avoiding choking of the filter bag. A raking system provided to avoid lump formation in the container to achieve uniform fluidisation & uniform drying. A model with complete automation and PLC, automatic bag shaking and with mimic is also offered. Promas Engineers is manufacturer, supplier and exporter of fluid bed dryers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world.

    ...more
    Get Best Price
  • Colloid Mill

    Colloid Mill

    Request for Price

    Application: The Colloid Mill can be used as an in line unit (horizontal execution) for continuous operation in a process line, or with a funnel & circulation line (vertical execution). Colloid Mill has a broad application range & is used in the Food, Pharmaceutical, Chemical & Cosmetic Industries & even in water treatment plants. We are manufacturer, supplier and exporter of colloid mills according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Working Principle of Colloid Mills It operates successfully for products which must be ground & well dispersed. It disintegrates particles faster & uniform swiveling without forming agglomerates & homogenizes products in one pass. The Mill develops not only hydraulic high pressure in the grinding tool section, but turbulence & cavitations which when combined provide both a gentle grinding & the required impact, squeezing, cutting etc. This effects the homogenizing of products & wetting out of powders, all in one pass. The centrifugal force of the rotor brings the material inside the mill. The rotor & stator combination with its exceptional large surface area provides both a gentle grinding & the required impact effect. A three way valve at the discharge connection of the Colloid Mill can either provide material to inlet opening for rework or discharge the processed material.

    ...more
    Get Best Price
  • Co Mill

    Co Mill

    Request for Price

    capacity: 1hp, 3hp, 5hp, 7.5hp, 10hp, 12.5hp model application: granulation of dry powders for tablet manufacture bulk density fine tuning sizing. Uniform sizing of wet granulation in tablet manufacturing.lump-free homogeneous blending to precise-size requirements.reducing difficult, sticky, heat-sensitive agglomerates into pieces, crumbs or powders of uniform size, continuously without excessive heat buildup or screen blockage. working principle of co mills the co mill is used for a wide range of products and applications. It can be used for mixing and dispersing, size reducing, separating and bulk density adjustment. The typical particle size distribution (psd) is tightly contained with the 1 mm sieve to 0.25 mm sieve range (18 mesh to 120 mesh), depending on the screen and impeller choices. Traditional milling technologies do not have the same control over the psd resulting in more fines & thus causing more of dust, whereas, in a co mill, the fines generated are much lesser & no dusting of materials, thus, giving a better and efficient milling results. We are manufacturer, supplier and exporter of co mills according to isi guidelines and user’s requirements since 1990 from mumbai to india and all over the world.   advantages of co mills: the output in co mill is very near to the size of the sieve used approx 80% -90% where as in multi mill it is 1/3 of the sieve used. the fines generated are on a lower side as compared to other mills. heat generation in co mill is comparatively very low as it works as forced pressure. other mills have more of dusting as compared to co mill. Drive element are reduced in co mill as it is direct driven. output in co mill is more than in other mills. design is flexible as per your requirement. design is suitable for dry as well as wet milling.

    ...more
    Get Best Price
  • Ball Mill

    Ball Mill

    Request for Price

    Capacity: 10 litres to 10000 litres Application: We deliver the quality based ball mill, is a key equipment for regrinding. Promas Engineers is well known name in ball mills manufacturers in India. We are manufacturer, supplier and exporter of ball mills according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc. Our ball mill can grind ore or other materials that can be grinned either by wet process or by dry process. Working Principle Ball mill is an efficient machine for fine powder grinding and key equipment for grinding after the crushing are two ways of ball mill grinding: the dry way and the wet way. It is used to grind many kinds of mineral ores and other materials, or to select mine. Ball mill is also widely used in the manufacturing industries, such as Biotechnology, Cement, Silicate, Fertilizer, Ferrous Metal, Non-ferrous Metal and Glass Ceramics and can be used for the dry and wet grinding for all kinds of ores and other grindable materials.

    ...more
    Get Best Price
  • Agitated Vacuum Dryer Natural Gas Plant

    Agitated Vacuum Dryer Natural Gas Plant

    Request for Price

    Capacity: 5 Litres to 5000 Litres chamber volume M. O. C: SS 316, SS 304, Carbon Steel We are manufacturer, supplier and exporter of agitated vacuum dryers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Application: To dry heat sensitive and air sensitive material under vacuum thus accomplishing the drying at moderate temperature avoiding contact with air. Working Principle Agitated Vacuum Dryers The entire drying chamber is well machined to bring about a close encounter with the agitator blade thus ensuring proper shuffling of the material and thus avoiding localised over heating. The leak proof front opening door ensures easy cleaning of the entire chamber.The top loading and bottom unloading facility provides for easy charging and discharging of the material. The cyclonic trap prevents the fine dust of the dry material from flying into the vapour condenser. The condenser and the condensate collection tank prevent the vapours from entering the vacuum pump. Appropriate vacuum pump and accessories are provided with the unit with valves to adjust the right vacuum in the unit. The entire unit is mounted on a steel frame. They are used with particular success in agglomeration free rapid drying, heterogeneous reactions with systems of different substances, sterilization and in general for vacuum application. Heating arrangement can also be provided along with the unit. Choice of product contact materials: AISI 304L, AISI 316L, Hastelloy optional HALAR/PTFE Coating available. Volume of the wet material loaded into the dryer is restricted to 40-45 % of gross volume. Salient Features Fast dry product discharge :- Dried material is discharged quickly by pushing action of the blade towards the discharge valve Large size front door allows full accessibility for easy and thorough inner cleaning Full door opening & Dismantable blade, not in hollow blade d,esign helps for Cleaning / Validation Standard manufacturing high geometric accuracy of the body surface ensuring efficient removal of the product from the heated walls Full process automation possible by means of PLC & DCS (* Optional) Internal heating is through a hollow shalf. The blades are provided with scrappers with minimum clearance versus heated wall which increases the rate of heat transfer. It is possible to install the dryer through a partition wall separating its loading unloading connections from its drive assembly, vacuum system water heating system etc. High speed chopper contributes to the drying process  

    ...more
    Get Best Price
  • Rotary Double Cone Vacuum Dryer

    Rotary Double Cone Vacuum Dryer

    Request for Price

    Get Best Price
  • Jet Mill With Reverse Pulse Jet

    Jet Mill With Reverse Pulse Jet

    Request for Price

    Get Best Price
  • Jet Mill 2 Lab Model

    Jet Mill 2 Lab Model

    Request for Price

    Get Best Price
  • mini milling machine

    mini milling machine

    Request for Price

    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

Contact Information

Promas Engineers Private Limited

  • Debin Abraham
  • R - 877, T. T. C., M. I. D. C. Industrial Area, Rabale, Navi Mumbai, Maharashtra
top