Back Back
pure steam generator
Our company is renowned manufacturer of finest grade Pure Steam Generators and serving our esteemed clientele in India. We are offering these Pure Steam Generators by using the best raw materials available in the market and fabrication is made with utmost care by following international laid procedures. These offered products are used to produce pure steam, which is free from endotoxin. Our Steam Generator is highly used for sterilization of storage tanks, fermenters, reactors and autoclaves. Tough, less maintenance, reliability and stability are the salient features of our Pure Steam Generator. Our offered Pure Steam Generators are manufactured with state of art facility under the supervision of experts. Quality control is our top priority and ensures that all our offered Pure Steam Generators passed laid quality checking procedures. Our offered Pure Steam Generators are appreciated for their efficiency, corrosion resistant, durability, easy operation and easy maintenance, thus makes us as ultimate choice as Pure Steam Generator manufacturers in India to our esteemed clientele. We are offering finest quality Pure Steam Generators at competitive prices available in the market.
pure steam generator
Capacity : 3 kg/cm2 at 143°
Electricals : Main supply A.C., 415V, 3 phase/50 cycles, Max, load 3kw. Air: 1 cfm at Kg/cm2 gauge.
Pure Steam Generator for pharmaceutical & Biotech Industries to produce pure Pyrogen free sterile steam for Sterilization in autoclaves, Pipeline, Tanks.Complete with all contact parts in S.S 316Lq and non contact parts in S.S 304 q complete with column-1 No. Pre heater-2 Nos., S.S stand, all piping connection will be sanitary triclover fittings, Sumo make pump for feed water, Flow meter, S.S panel.Control Panel (S.S 304) with boiler steam & pure steam Temperature indicator, conductivity indicator for incoming feed water.The feed water & the cooling water should be of Dematerialized quality pass through filter, Cation, Anion & Mixed bed Exchanger to get minimum dissolved solids (T.D.S) & hardness.
pure steam generator
We offer Pure Steam Generator. Application:- Pure & Pyrogen free sterile steam is getting used for sterilization in autoclaves, pipeline, tanks & Fermentors. It is also getting used for re-humidification of sterile areas & preparation of distill quality water for medicinal & general purpose used in Pharmaceutical, Bio-Technology, Hospitals & allied industries.
pure steam generator
The pure steam generation system consists of two columns – Evaporator and Separator. The Evaporator is a shell and tube type of heat exchanger. The driving force i.e. plant steam heats the feed water in the tube side of the evaporator to generate vapour. The generated vapour enters the Separator column. The separator column uses a triple punch separation technique for particle entrainment and separation of impurities such as droplets and pyrogenic material. The first punch is offered by the multi- directional baffle, which makes the vapour traverse a torturous path. In the second stage, the steam passes through a cyclone type centrifugal separator. The final blow is delivered by a Demister pad to ensure pyrogen free, dry and saturated steam. Features Komals Pure Steam Generator is a packaged skid mounted unit incorporating all necessary controls and functions to produce Pure steam as per latest IP/BP/USP standards. Plants are available from 50 kgs/hr to 2000 Kgs/hr, These generators are basically used for Sterilization of vessels, Sterilisation of Distribution systems, Autoclave, reactors and also humidification of sterile area Full-Automatic PLC based Control Panel System with auto sanitization and printing facility. First column equipped with Double tube sheet as a provision to avoid boiler steam mixing with Purified water. All Contacts parts are SS316L with internally electropolishing < 0.5Ra Complete documentation to meet and exceed international audit requirements. The piping system is orbital welded and qualified using videoscopy procedure.
pure steam generator
Condition : New
Features : Tough ,Low maintenance costs , Stable.
pure steam generators
We are offering pure steam generators. Indo german pure steam generator is used to produce pyrogen free sterile steam for sterilization. It meets the ipbp, usp, us fda standards and is used for sterilization in fermentors, reactors, pipelines & autoclaves. It is also used for humidification of sterile area.
pure steam generator
We have great pleasure to introduce ourselves as manufacturer of Pure Steam Generator, Our team of quality experts has tremendous experience who make sure stringent quality checks in order to ensure that high international standards.
pure steam generator
'joel' pure steam generator meets the asme, bpe & cgmp specifications. Pure steam generator produces pyrogen from sterile steam for sterilization which meets international standards including indian, british & united states pharmacopoeia. The pure steam generated is widely used in medical field, biochemical, piping & tank & sterilization. The pure steam produced from psg is according to finn aqua design & it is low maintenance & low operational costs. all contact parts are in aisi 316/aisi ss 316l to assure high purity steam quality & increase the life of equipment - inner contact surfaces are electro double tube sheets is constructed in the first column where boiler steam is present sanitary tricolor fittings are used for quick & easy preventive maintenance all pipes & tubes are seamless & gaskets made from ptfe material. plc based system for automated operation with all required inter locks & validated logic with skid mounted aisi ss 304 control panel with printing facility high purity flow diversion valve is provided for protection of high purity steam quality insulation is made with 3cm mineral wool covered by aisi 304 stainless steel sheet magnetic control system is provided for first column to control water i.e. High level & low level fast response to pure steam demand.
pure steam generator
Condition : New
Application : Pharmaceutical
Voltage : 220 - 440 V
Driven Type : Electric
Material : Stainless Steel
Surface Finish : Polished
Frequency : 50 - 60 Hz
pure steam generators
Capacity : 50 to 1000 Kg./hr.
Temperature Ambient : 30ºC
technical specification : purified water with max. Conductivity of 0.5 micromhos/cm. Should be used. pressure should be 1 kg/cm.sq. Higher than the in feed steam pressure. temperature ambient 30ºc. outlet of clean steam pressure 3 kg./cm.² operation : to produce pyrogen free sterile steam confirming to ip/bp/usp specification. endotoxing less than 0.25eu/ml low maintenance cost. features : fully auto control panel with touch screen online conductivity for feed water & outlet of pure steam. all tubes are seamless pipes / electropolish. toc – 100 ppb. all gaskets are teflon. imported pumps. advantages : to sterilize vessel /pipelines/fermentator without dismantling and movement.
pure steam generator
Material : All contact parts are made out of AISI 316quality.
Feed Water Quality : De-Ionized mineral water with a max. conductivity of 5 microsemens/cm2
Boiler Steam : Minimum pressure 6 Kg/cm2
Pure Steam : 3 Kg/Cm2
Pure Steam Generator is designed to produce sterile, pyrogen free steam conforming to I.P./B.P & LAL TEST specifications. D.M.Feed Water is fed to the 1st & 2nd Pre-Heater where it gets heated nearly to the boiling point. The feed water then passes to the main chamber where it is heated by means of external boiler steam. Due to heat exchange, surface evaporation of the feed water takes place to produce pyrogen free sterile steam. Injectable Section:- Pure Steam Generator is designed to produce sterile, pyrogen free steam conforming to I.P./B.P & LAL TEST specifications.
pure steam generator
Pure Steam Generators exploit a competent evaporation column, thereby giving the highest quality Pure Steam. In addition, when assessment or preservation is required, the components are readily accessible with no need to eradicate or disassemble any of the major components to access the critical areas.Pure steam generator is ideal in sterilization of pipelines, tanks,fermentors etc. It is also suitable for humidification of sterile areas where pure steam is required.
pure steam generator
The pure steam generation system consists of two columns – Evaporator and Separator. The Evaporator is a shell and tube type of heat exchanger. The driving force i.e. plant steam heats the feed water in the tube side of the evaporator to generate vapour. The generated vapour enters the Separator column. The separator column uses a triple punch separation technique for particle entrainment and separation of impurities such as droplets and pyrogenic material. The first punch is offered by the multi- directional baffle, which makes the vapour traverse a torturous path. In the second stage, the steam passes through a cyclone type centrifugal separator. The final blow is delivered by a Demister pad to ensure pyrogen free, dry and saturated steam. Features Komals Pure Steam Generator is a packaged skid mounted unit incorporating all necessary controls and functions to produce Pure steam as per latest IP/BP/USP standards. Plants are available from 50 kgs/hr to 2000 Kgs/hr, These generators are basically used for Sterilization of vessels, Sterilisation of Distribution systems, Autoclave, reactors and also humidification of sterile area Full-Automatic PLC based Control Panel System with auto sanitization and printing facility. First column equipped with Double tube sheet as a provision to avoid boiler steam mixing with Purified water. All Contacts parts are SS316L with internally electropolishing < 0.5Ra Complete documentation to meet and exceed international audit requirements. The piping system is orbital welded and qualified using videoscopy procedure.
pure steam generator
pure steam generator
pure steam generators
