Sam Seals India Jogeshwari West, Mumbai, Maharashtra

TYPE SSI-16 : is Inherently unbalanced metal bellow seal. This seals are independent of direction of rotation. The unique feature of this type of seal is that, there is no dynamic ‘O’ rings and therefore it will never hangup or damage the shaft and sleeve, it also has an ability to handle corrosive as well as abrasive & viscous media. These seals have self-cleaning & non-clogging construction. With selection of special bellow material it can be used in highly corrosive media.

SSI-108B Mechanical Seal for Vertical Type Agitation Equipment Structural Features: SSI-108B   is double end   unbalanced  and balanced, with bearing transmission. The component is cartridge seal with easy installation. Industrial Standards: HG21571-95 Scopes of Application: mainly used in top driven vertical type agitation equipment, which does not have strict requirements for leak proof ness. This component can work as an alternative to M461  of Burgmann.

Surface of Application : Industrial

Our Dry Running Agitator Seal offers good performance in high vacuum conditions. It requires no auxiliary equipment for installations. Our range are quality tested at every level and are offered at industry leading price. Type SSI-105: seals are outside mounted balanced seal, which require no shaft or sleeve step for balancing SSI-105 seal shows good performance in high vacuum conditions. Since no auxiliary equipment are needed for installation, it is very cost effective & economical. These seal can be easily installed & repaired on the field to minimized replacements costs & downtime.

We are a top manufacturer of thermosyphon pots for mechanical seal. We are devotedly working to provide a high-quality selection of Thermosyphon Seal Pots to our esteemed customers around the nation. It is made for applications that are common in industries. Thermosyphon Pot is used to pressurize double and tandem mechanical seals as well as provide barrier fluid. It has all the connections and fittings required to meet new requirements after installation. In domestic markets, this thermosyphon seal pot is widely utilized. These goods come in a variety of forms, dimensions, and styles. A customer paid a fair price for them. This is utilized to give the necessary lubrication and cooling to the seal faces in tandem or back-to-back arrangements of double mechanical seals to achieve the suggested seal life.

Application : Industrial

Finishing : Polished

Capacity : 7, 10, Litres

Material : SS

Types SSI-11RF  shaft seals feature chemically inert materials in all areas and on all surfaces in contact with the liquid being sealed. Metallic components, springs and clamp ring are located outside the pump seal chamber, isolated from the process liquid.

Type : Teflon Bellow Seal

Brand Name : Sam Seals India

Material : Teflon

Condition : New

Specialities : Unbreakable, Heat Resistant, Good Quality, Fine Finish

Mechanical Seals CR (cartridge), CRA (cartridge), GR-B and GR-C for Grundfos Water Pumps   Structural Features: single end, unbalanced, independent direction of rotation, cartridge shaft seals.   Industrial Standards: specifically Designed for Stamped Stainless Steel Centrifugal Pumps   Scopes of Application: specifically designed for Grundfos water pumps. Widely used in power plants, city water supply projects, and fire control.   Basic Features Structure: Single End Pressure: Medium Pressure Mechanical Seals Speed: General Speed Mechanical Seal Temperature: General Temperature Mechanical Seal Performance: Wear and Weak Corrosion Standard: Specifically Designed for Grundfos Stamped Stainless Steel Centrifugal Pumps Model NO.: SSI-GF Balance: Unbalanced Specification: Inner Diameter: , 12 mm, 16 mm,  22 mm   Operation Parameters: Pressure: 1.6 MPa or less Temperature: – 20 ~ 150 ºC Linear Speed: 10 m/s or less   Materials: Rotary Ring Face: Carbon/SiC/TC Stationary Ring Face: Carbon/SiC/TC Elastomers (elastomer bellows for GB-B): NBR/Viton/EPDM Springs: SS304/SS316 Metal Parts: SS304/SS316   Mediums:  oil, water, weak acid and alkali and other corrosive mediums.   Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.

Model No. : SSI-GF

Supplier & Distributor of Single Coil Spring Balanced Seal. Our product range also comprises of Dry Running Agitator Seal, Multi Spring Unbalanced Seal and Spring Unbalanced Seal.   Type SSI-92: are single coil unbalanced mechanical seals, reliable & rugged enough for variety of applications. Designated as SSI-91 & SSI-92 for ‘O’ Ring & PTFE wedge type Secondary Seals respectively. The balanced & unbalanced version can just be obtained by simply changing the carbon face assembled through circlip provided. Non-clogging spring design enables these seals to be reliably used in situations involving abrasive, corrosive and viscous media. generally handled by high-pressure pumps.   Applications : Used in high pressure pumps, refineries, fertilizers, nuclear plants & petroleum products.   Material : Seal Faces : Carbon Vs Sic./TC Secondary Seals :Viton/PTFE/GFT Metal Components : SS-316   Operating Limits : Shaft Dia : 10 to 150mm Pressure : up to 30 Bars Temp. : -50 to 180°C Speed : up to 15 m/s

Designed to handle solids up to 14% by weight. Hydraulically balanced faces for excellent seal reliability. Springs are located outside the process. Flushing helps to lubricate or cool the sea l faces from atmospheric side of mechanical seal. They are cost effective for basic  application such as Centrifugal Pumps and other Equipment with Rotating Shaft, Handling Crystallizing Slurry, Suspended Solid Slurry, Saturated Chemical Slurry, General Chemical Slurry.   Design Features: Slurry seal. Standardized modular design. Single Acting. Mechanical Seals. Inside Mounted.   Applications : Specially used in paper industries, Petrochemicals, Petrochemicals, Petroleum refinery etc.   Material : Seal Ring Faces : SiC, Carbon and TC Seat Faces : SiC and TC Elastomer : Viton, TTV, FEP and FFKM MOC : SS 316   Operating Limits : Shaft Dia. : 25mm to 80mm Pressure : Full Vacuum to 7 bar Temperature : -30 oC to 260 oC (Depending upon Elastomer) Speed : 3000 r.p.m.

TYPE SSI-75 : Mechanical seal SSI-75 series are special purpose single coil spring balanced seals designed for use in media containing abrasive or solid particles.   Salient Features Spring completely protected from the product. Easily handle media containing abrasive particles and solids. Axial compensation of movement 1mm. Perfect for standardization purpose.   Applications : Specially used in paper industries, Petrochemicals, Petrochemicals, Petroleum refinery etc.   Material : Seal Faces : Ceramic/Sic/Cabon Vs Ceramic/RB Sic. /TC Secondary Seals : Viton/PTFE/GFT Metal Components : SS-316   Operating Limits : Shaft Dia :25 to 150mm Pressure :up to 15 Bars Temp. :-50 to 180°C Speed :up to 25 m/s

Pressure : Up To 15 Bars

Speed : Up To 25 M/s

Features For plain shafts Single seal Unbalanced Super-Sinus-spring or multiple springs rotating Independent of direction of rotation Variant with PTFE secondary seals for high chemical resistance   Advantages Universal application opportunities Efficient stock keeping due to easily interchangeable faces Extended selection of materials Insensitive to low solids contents Flexibility in torque transmissions Self cleaning effect Short installation length possible (G16) Pumping screw for media with higher viscosity (M7..F)   Operating Range Shaft diameter: d1 = 14 … 100 mm (0.55 ” … 3.94 “) Pressure: p1 = 25 bar (363 PSI) Temperature: t = -50 °C … +220 °C (-58 °F … +428 °F) Sliding velocity: vg = 20 m/s (66 ft/s) Axial movement: d1 = up to 25 mm: ±1.0 mm d1 = 28 up to 63 mm: ±1.5 mm d1 = from 65 mm: ±2.0 mm Materials Seal face: Special cast CrMo steel , Silicon carbide , Aluminium oxide (V) Seat G9: Carbon graphite antimony impregnated , Carbon graphite resin impregnated  Silicon carbide Secondary seals: EPDM , NBR  FKM , FFKM Springs: CrNiMo steel  Metal parts: CrNiMo steel , Duplex (* Cannot be combined with seal face made of S   Standards and approvals EN 12756   Recommended applications Process industry Chemical industry Pulp and paper industry Water and waste water technology Shipbuilding Lube oils Low solids content media Water / sewage water pumps Chemical standard pumps Vertical screw pumps Gear wheel feed pumps Multistage pumps (drive side) Circulation of printing colors with viscosity 500 … 15,000 mm2/s

TYPE SSI-55 Single Cartridge Seal Series is a modular cartridge seal family that includes elastomer o-ring pusher seal designs. Type SSI-55 single seal arrangements incorporate an elastomer o-ring as the secondary sealing member. A common seal head/mating ring set, utilized throughout all versions, is reversible to allow rotating. Seat/mating ring or rotating seal head operation, and is interchangeable with metal bellows seal heads. Seal has an optional quench gland with carbon ring throttle bushing.   Balance Pusher Seals available in Single Configuration used for Sealing Environmentally. Dual Directional. Stationary spring design. Reversible Seal Head. No clogging Wave Spring outside the Product. Components in Cartridge Design are Builds for the Highest Reliability and Simple Installation.   Materials : Seal Ring Faces :TC and SiC Seat Faces : SiC and TC Elastomer : Viton, PTFE, FEP and FFKM End fitting MOC : SS 316,HAST-C and Carpenter 42 MOC : SS 316 – CHANGE OF MOC ON REQUEST   Operating Condition: Shaft diameter : 25 to 150mm Pressure : up to 15 Bars Temperature : -50 to 180°C Shaft Speed : up to 25 m/s

Pressure : Up To 15 Bars

DOUBLE Cartridge Seal :  We are providing our customers a wide range of Double Cartridge Seals. These cartridge seals are widely finds its applications in various industrial sectors.   SSI-50DMC Double Cartridge seals are self-contained units consisting of a shaft sleeve, seal, and gland plate. The unit is fitted onto the pump shaft as a built assembly, and no further fitting is required.  Double Cartridge seals are an attempt to over-come the fitting problems of conventional seal, They are supplied in double form, and the gland plate is often fitted with various tapping to provide for flushing, cooling water injection, and disaster control.   The cartridge can overcome several limitations of the standard pump gland. Tangential tapping for introducing fluids into the gland cause less  disturbance to the seal face than the radial tapping often found on pump units. Look again at the tapping provided for flush water to the packed gland, a tangential tapping would provide a less turbulent water source. For a packing gland this may not be important but to a mechanical seal it can be another adverse condition with which to cope.   The setting position of the seal is set by the cartridge design, but the seal unit should not be screwed to the shaft until the gland plate is secured to the pump and any adjustments made to the shaft position. Once this has been completed the set screws can be tightened and the spacers removed.   So, what can go wrong. The design works to eliminate many of the common causes of seal failure on installation and because the seal is presented on its own shaft sleeve any damage that might be caused by a conventional seal to the pump unit is also eliminated.   Materials : Seal Faces : Ceramic /Sic/Carbon Vs Ceramic /RB Sic./TC Secondary Seals : Viton/PTFE/GFT Metal Components : SS-316   Operating Condition: Shaft Dia. : 25 to 150mm Pressure :up to 15 Bars Temp. : -50 to 180°C

We are providing an entire array of Multi Spring Unbalanced Seal and keep innovating them based on current market trends and expectations. They are durable and provide high operation reliability.   Type SSI-41U & 42U : are general-purpose multi spring unbalanced seals. Designated as  for the unbalanced Versions with ‘0 Ring & PTFE wedge respectively. Shaft fretting is minimized due to lower spring loads provided through wedge or ‘0’ Rings, occupies less stuffing box area due to its narrow cross-section & compact design.   Applications : Generally used in Petrochemicals, Light Hydrocarbons & General Industrial Fluids. Materials : Seal Faces: Carbon vs Ceramic/Sic./TC Secondary Seals: Viton/PTFE/GFT Metal Components: SS-316   Operating Limits : Shaft Dia. : 14 to 150mm Pressure :up to 10 Bars Temp.: -50 to 280°C Speed :up to 25 m/s   These Seals can be easily assemble or dismantled through circlip provided & cab be change to Balance version of its type merely by changing the carbon face only & an be provided with single, double or tandem arrangement worth external seal support systems & devices.

We are one of the leading providers of Multi Spring Balanced Seal  that are available in different sizes. Our range is available in market at competitive rates.   TYPE SSI-41B : are pushers type balanced multi spring seals generally used where high-pressure sealing is required. Due to its compact radial & axial dimensions these seals required lower stuffing box space for installation. These seals can be provided with single, double or tandem arrangement with external seal support systems & devices.   Applications : Generally used in Petrochemicals, Petroleum refinery, Light Hydrocarbons & General Industrial fluids.   Materials : Seal Faces :Carbon vs Ceramic/Sic./TC Secondary Seals : Viton/PTFE/GFT Metal Components :SS-316   Operating Limits : Shaft Dia :14 to 150mm Pressure :up to 30 Bars Temp. : -50 to 280°C Speed : up to 25 m/s

Dual seals are recommended for a variety of purposes that include: To prevent a costly product from leaking. To prevent a dangerous product from leaking to the atmosphere. To prevent a pollutant from escaping to the atmosphere. As a back up seal to prevent costly down time when the first seal wears out or fails. This is an important element in any predictive maintenance program.   All of the above are sensible reasons for using two seals in a pump, but In this paper we’ll be considering the use of dual seals as an environmental control to prevent the sealed product from either opening the seal faces, or damaging one of the seal components, the two reasons any mechanical seal ever failed.   We can use the dual seals to: Control the temperature at a seal face. Prevent a pressure drop across a seal face. Eliminate atmospheric conditions outboard of a mechanical seal. To break down the pressure in a high pressure application, by inserting an intermediate pressure between the seals. Two lower pressure seals can then be used to seal a high pressure fluid that would normally require a very expensive high pressure mechanical seal. To provide a lubricant if one is needed to prevent “slip stick“. This is almost always the case when you are sealing a gas.   Dual seals can be of either the rotating or stationary version and can be installed in four different configurations. Back to back or facing in opposite directions Tandem or facing in the same direction Face to face or facing towards each other Concentric or one inside the other.   The fluid that circulates between the seals is called barrier fluid if it is higher than stuffing box pressure. It is called buffer fluid if it is lower than stuffing box pressure. It can be circulated between the two seals by: Natural convection using a convection tank. Insulated piping coming from the top of the gland to the convection tank, and finned piping coming out of the tank will aid convection if heat removal is a problem. A pumping ring can be installed between the seals for those instances where natural convection is not sufficient to remove the heat being generated between the faces. This is very necessary when oil is used as the barrier fluid. Oil has a low specific heat and poor conductivity, making it a poor choice as a barrier fluid. Most of the newer cartridge dual seals come equipped with a built in pumping ring. Introducing the fluid between the seals, from an external source. Be sure to bring the fluid in at the bottom of the gland and out the top to prevent an air pocket from forming in the gland.   The following illustrations describe the rotating version (the spring or springs rotate with the shaft) of these dual seal configurations. You should be aware that a stationary version is also available from any of the major seal companies. You should also consider: Use only the hydraulically balanced version of these seals to prevent the generation of excessive heat between the seal faces. Two way balance is always desirable in any dual seal application to allow you the option of using either a high or low pressure barrier fluid and to prevent the seal faces from opening if either the system or the barrier fluid pressure fluctuates. Be sure to select seal faces with good thermal conductivity. Try to locate any elastomers away from the seal faces if possible. Elastomers are very sensitive to heat.

Color : Silver

Basic Features Structure: Single End Pressure: Medium Pressure Mechanical Seals Speed: High Speed Mechanical Seal Temperature: High Temperature Mechanical Seal Performance: Corrosion Standard: ANSI Model NO.: Type ssi-39s Balance: Unbalanced Specification: Inner Diameter: 1 to 4.5 inches   SSI-39S  Pusher Mechanical Seals for Paper Pulp Pumps, Mixers and Water Pumps   Structural Features: single end, multiple springs, unbalanced, independent direction of rotation, drive sleeve transmission. This component has a simple structure and high reliability.   Industrial Standards: ANSI   Scopes of Application: mainly used in different types of mixers, such as fermentation tanks, seeding tanks, stainless steel reaction kettles and sewage treatment devices, as well as water pumps, sewage pumps, paper pulp pumps. This product is widely used in pulp and paper, mining, steel production, food and beverage, water treatment and management, geothermal, concentrated solar power and bio-fuels industries.   Operation Parameters: Pressure: 1.2 MPa or less Temperature: – 40 ºC to 180 ºC Linear Speed: 23 m/s or less   Materials: Rotary Ring Face: TC/SiC Stationary Ring Face: Carbon/SiC/TC Elastomers: FKM/NBR/EPDM Springs: SS304/SS316/HC276 Metal Parts: SS304/SS316/SS316L/2205/2507/Q235   Mediums: water, paper pulp, food, beverage and other weak corrosive mediums.   Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.

Pressure : 1.2 MPa Or Less

Temperature : – 40 ºC To 180 ºC

We avail our clients with our fine and unique range of Single Coil Spring Unbalanced Seal that is manufactured using high grade quality material and is made as per the matching quality standards.   TYPE SSI-32C : are single coil unbalanced seal with lugs these seals are simple in design & reliable & rugged enough for the most difficult applications. In SSI-32C’V” packing used as Secondary seals respectively. Special notches enhance the required driving torque & hence the seal is independent of direction of rotation. Non-clogging spring design enables these seals rube reliably used in situations involving abrasive, corrosive & viscous fluids generally handled by high Temperature pumps.   Applications : Generally used in refineries, fertilizers, nuclear plants & petroleum pipelines.   Material : Seal Faces :Carbon/TC/Sic. Vs Ceramic/RB Sic./Tc Secondary Seals :Viton/PTFE/GFT Metal Components : SS-316   Operating Limits : Shaft Dia :25 to 150mm Pressure :up to 10 Bars Temp. :-50 to 280°C Speed :up to 15 m/s

Speed : Up To 15 M/s

Seal Type SSI-26 Mechanical Seal are Externally Mounted Reverse Balanced Design Seal having ‘O’ Ring as a Secondary Sealing member. Secondary Sealing member can be changed as per Chemical Compatibility. All metal components including springs are Isolated from the Sealed, Aggressive Medium. Simple checkout method function and cleaning possibility as this Mechanical Seal located easily access outside the pump. Especially design Clamp Ring eliminate Slipping on Shaft.   Features Single Acting Mechanical Seal. Dual Directional Mechanical Seal. Outside Mounted Mechanical Seal. Reverse Balanced Design. Multi Spring design Mechanical Seal .   Materials Seal Ring Faces : Carbon and SiC Seat Faces : Ceramic and SiC Elastomer : Viton, EPDM, TTV, FEP and FFKM MOC : SS 316, Hast -C and Alloy – 20   Operating Capabilities Shaft Dia. : 16mm to 70mm Pressure : Up to 8 bar Temperature : Upto 120°C Speed: 3000 r.p.m.

Material : Polyurethane

Finishing : Coated

Material Grade : SS304

Shape : Round

Condition : New

Color : Black

Automation Grade : Automatic

Usage : Arrest Leak

Certification : ISO 9001:2008 Certified

Sealing Type : Single Spring

Outer Diameter : 5mm

Specialities : Unbreakable, Heat Resistant, Good Quality, Fine Finish, Easy To Install

Packaging Type : Packet, Carton Box

Size (Inches) : 2Inch

Overall Dimension (LXBXH) : 390X170X360mm, 490X270X460mm

Suitable For : Water

Inner Diameter : 30mm

Pressure (Bar) : 10 Bar

Seal Width : 10mm

Thickness : 10-20mm

Seal Length : 100mm

Standard balanced single cartridge seal with protected spring and pentagonal drive. The protected-spring design makes this seal suitable for a wide range of applications: pumps conveying slurries for the sugar industry, paper industry, extracting industry, for heavy industries. All simple assemblies possible (cartridge, tandem, quench, etc.). Standard balanced mechanical seal with protected spring and pentagonal drive. Imperial version available.   Friction faces :  Friction faces Carbon impregnated resin (B1) Silicon carbide (U6). For the most difficult cases use friction faces made of nickel-tungsten carbide (U2). Supplied with FKM seals.   Fluids : All corrosive, abrasive and slightly clogging fluids.   Material : Centrifugal pumps

Material : Metal

Finishing : Polished

Color : Silver

Packaging Type : Carton Box

Warranty : 1 Year

Basic Features Structure: Single End Pressure: Medium Pressure Mechanical Seals Speed: General Speed Mechanical Seal Temperature: General Temperature Mechanical Seal Performance: Wear and Weak Corrosion Standard: Specifically Customized Model NO.: SSI-22NC Balance: Unbalanced Specification: Inner Diameter: 30 mm to 160 mm   Structural Features: single end, multi springs, unbalanced, independent direction of rotation, screw pin transmission. The axial length of this seal is small. The loads on the sealing faces are balanced and the seal is not limited with the rotary direction. All transmission components are assembled as one body so the seal is easy to install. The transmission is also balanced and the seal is easy to adjust with stable performance.   Industrial Standards: Specifically Customized   Scopes of Application: mainly used in centrifugal pumps, submerged motors, clean water and sewage pumps, piping pumps and especially used in immersible pumps for water supply, sewage treatment and environmental protection industries. This component can work as an alternative to the similar product (M524 series) of Eagle Burgmann.   Operation Parameters: Pressure: 0 ~ 1.0 MPa Back Pressure: 0 ~ 0.2 MPa Temperature: – 20 ~ 150 ºC Linear Speed: 15 m/s or less   Materials: Rotary Ring Face: SiC/TC Stationary Ring Face: Carbon/SiC/TC Elastomers: NBR/FKM/PTFE Springs: SS304/SS316 Metal Parts: 2Cr13/SS304/SS316   Mediums: oil, water, acid, alkali and corrosive mediums.   Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.

Capsulated Spring Seals are a cost effective version of a Balanced seal The feature the same rugged and reliable construction as the Multi spring unbalanced seals.   Capsulated Balanced seals designed for media containing solid slurry particles. The springs are protected from solidifying media resulting in high reliability of the seal. This seals are independent of direction of rotation.   Operating Limits Pressure : 6 bars (Max) Temperature : (-)20c to (+)100c Speed : 2900 rpm (Max) Sizes : 18 mm to 100 mm   Applications : General Chemicals Media Containing solids particles Acids & Alkalies

Pressure : 6 Bars (Max)

Usage : General Chemicals Media Containing solids particles Acids & Alkalies

Size : 18 Mm To 100 Mm

Temperature : (-)20c To (+)100c

Speed : 2900 Rpm (Max)

Basic Features Structure: Single-End Pressure: Medium Pressure Mechanical Seals Speed: General Speed Mechanical Seal Temperature: High Temperature Mechanical Seal Performance: Wear Standard: DIN24960, ISO3069, GB6556 Model NO.: SSI-21JB & 21J Balance: Unbalanced Specification: Inner Diameter: 12 mm to 100 mm   SSI-21J Conical Spring Mechanical Seals for Clean Water Pumps, Circulating Pumps and Vacuum Pumps   Structural Features: single end, unbalanced, conical spring, dependent direction of rotation, spring transmission (conical spring drove by both side hook). This seal component has a simple structure, high compatibility and stable performance with great spring compensation. The stationary ring of this seal is standard G60 or G4.   Industrial Standards: DIN24960, ISO3069, GB6556   Scopes of Application: widely used in water pumps, sewage pumps, oil circulating pumps, chemical industrial pumps. Mainly used in oil refining, chemical engineering, chemical product transportation, water treatment and chemical fiber industry. This product can be an alternative to similar products from EG&G SEAL OL, Flexibox and Roten.   Operation Parameters: Pressure: 1.0 MPa or less Temperature: – 30 ~ 180 ºC Linear Speed: 15 m/s or less   Materials: Rotary Ring Face: Carbon/SiC/TC Stationary Ring Face: Carbon/SiC/TC Elastomers: NBR/Viton/EPDM/PTFE/FFKM Springs: SS304/SS316 Metal Parts: 410S/SS304/SS316/SS316L   Mediums: oil, water, amorphism acid, alkali, salt, and organic solvents.   Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.

Pressure : Medium Pressure Mechanical Seals

Speed : General Speed Mechanical Seal

Temperature : High Temperature Mechanical Seal

Basic Features Structure: Single End Pressure: Low Pressure Mechanical Seals Speed: General Speed Mechanical Seal Temperature: General Temperature Mechanical Seal Performance: Wear Standard: DIN24960, ISO3069, GB6556 Model NO.: SSI-21 Balance: Unbalanced Specification: Inner Diameter: 10 mm to 50 mm   Type SSI-21 Single Coil CONICAL Spring Mechanical Seal for Water Pumps, Temperature Control Pumps, Vacuum Pumps and Heat-exchange Oil Pumps   Structural Features: single end, unbalanced, conical spring, dependent direction of rotation, spring transmission. This seal component has a simple structure, high compatibility and stable performance with great spring compensation.   Industrial Standards: DIN24960, ISO3069, GB6556   Scopes of Application: widely used in water pumps, temperature control pumps, vacuum pumps and heat-exchange oil pumps. Mainly used in leathering, waste water treatment, plastic, and food machinery industry. .

Application : Industrial

Speed : General Speed Mechanical Seal

Basic Features Structure: Single End Pressure: Medium Pressure Mechanical Seals Speed: General Speed Mechanical Seal Temperature: General Temperature Mechanical Seal Performance: Wear and Corrosion Standard: ISO3069, GB6556, DIN24960 Model NO.: TYPE SSI-20 SPL Balance: Unbalanced Specification: Inner Diameter: 25 mm to 100 mm   SSI-20 SPL Single Spring Mechanical Seal for Water Pumps, Circulating Pumps and Vacuum Pumps   Structural Features: single end and single spring, unbalanced, fixed rotary direction and spring coil driven. The spring coil driven structure has a fixed rotary direction. The structure of this seal is simple and the cost is low. This seal component has a wide usage and is stable and reliable.   Industrial Standards: ISO3069, GB6556, DIN24960   Scopes of Application: widely used in petrochemical engineering, oil refining, chemical processing, chemical fibering, water treatment and chemical transportation.   Operation Parameters: Pressure: 0.8 MPa or less Temperature: – 20 ~ 150 ºC Linear Speed: 15 m/s or less   Materials: Rotary Ring: SiC/TC Stationary Ring: Carbon/SiC/TC Elastomers: NBR/EPDM/FFKM/Aflas/PTFE Springs: SS304/SS316 Metal Parts: 2Cr13/SS304/SS316   Mediums: oil, water, amorphism acid, alkali, and organic solvents.   Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.