Shikhar Steel Corporation Kumbharwada, Mumbai, Maharashtra

  • Weld Neck Flanges

    Weld Neck Flanges

    Request for Price

    Weld Neck Flanges are fittings used in place of welded flanges where rotating back up flanges are desired. They are also called lap joints and vanstone flared laps. A rotating back up flange seats itself against the back surface of the stub end. When bolts are added, the clamping action of the bolts presses the rotating back up flange against the back of the stub end. The gasket surface of the stub end then presses against a gasket and another gasket surface providing joints like standard flange joints. The seal is made by the gasket surface of the stub end alone, the flange only provides the clamping pressure on the joint. Our high quality Weld Neck Flanges (butt weld fittings) are tested and verified for durability, accuracy and precision. The Weld Neck Flanges are manufactured in all standard dimensions. The Weld Neck Flanges are provided with a standard weld bevel and can be available in squared, flanged, Victaulic and threaded ends. We offer Weld Neck Flanges at highly competitive prices.   Specifications Material : ASTM A182 F 304 / 304L / 316 / 316L / 317 / 317L / 321 / 309 / 310 / 904 / F1 / F5 / F9 / F11 / F22 ETC. & ALSO IN CS Size : 1/2" TO 24" Pressure : Sch 5s to Sch Xxs. Class : 150#, 300#, 600#, 900#, 1500#, 2500#

    ...more
    Get Best Price
  • Weldneck Flanges

    Weldneck Flanges

    Request for Price

    Weld Neck Flanges are drilled(machined) with the wall thickness of the flange having the same dimensions of the matching pipe, the lighter the pipe is, the larger the bore, conversely, the heavier the pipe, the small the bore, they are normally used for highpressure, cold or hot temperatureNotes :Flange dimensions to ANSI B16.5. Dimensions "B" & "D" includes raised face thickness.Bore (SCH) "C" purchasess to Specity.Larger outlet sizes are avilable on applications.ANSI 150# / 300# 2mm Raised Face. ANSI 600# / 2500# 7mm Raised Face.   Key Features: This is the most common type of high pressure pipe flange. They are distinguished from other types of pipe flanges by their long tapered hub and gentle transition of thickness in the region of the butt weld joining them to the pipe. The long tapered hub provides an important reinforcement of the weld neck flange proper in terms of strength and resistance to dishing. Uses of weld neck flanges: The weld neck flange is very resistant to dishing and has a very sturdy connection because it has the pipe along with the tapered hub. The flanges are ideal for extreme fluctuations of temperature. They are ideal in environments where there may be a lot of bending and handling of the flanges. Preferred in an environment with extreme temperature conditions. This type of flange is preferred for every severe service condition—resulting from high pressure or from sub-zero or elevated temperature. They are used in situations where loading conditions are substantially constant or fluctuate between wide limits. This is probably the best welding flange available because of its high, heavy neck. Highly recommended wherever a sound welded joint connection is needed.

    ...more
    Get Best Price
  • U Bend Tubes

    U Bend Tubes

    Request for Price

    U Bend Tubes are used in varied industries for multiple purposes. We make use of premium quality steel in the manufacturing of these U Bend Tubes, which ensures high durability, tensile strength and resistivity to adverse conditions. Meeting the exact specifications and drawings provided by the clients, we produce these U Bend Tubes. Additionally, customers are also eased with the availability of the copper steel tubes in varied finishes, length and diameters meeting the requisites of the applications. The variety of U Bend Tubes includes hydraulic tubes, hydraulic pipeline, cylinders pneumatic cylinders, u tube. Our bead removal tubes are highly popular for structural purposes and mechanical & general engineering purposes. Made of high quality metals, our bead removal tubes are demanded in both the domestic and international markets. They can also be customized as per client’s specifications. The process used in fabricating these U Bend Tubes: the removal of beads is done as per the standard specifications. Bead is cold worked and it is brought in level with the base metal before heat treatment on tube mill and the bead rolling is made in-line. This will help in recrystallization of weld structure. The weld structure will also homogenize faster in annealing process.Features : bead removal tubes improve corrosion resistance. It improves easy expansion in tube sheets and orbital welding. It also improves easy flow. There is easier cleaning and less scale deposits.Additional Information : Material used : tp304, tp304l, tp316, tp316l, tp321, tp310s, tp347h, tp316ti and so on. Standard : ASTM a 312213269, DIN 174582462, BS36051, JIS g34293459, ISO112920379329, GBT149751497613296 and so on.    Packing : Wooden cases, Bundle or plastic bags, Plywood boxes.

    ...more
    Get Best Price
  • U Bend Tube

    U Bend Tube

    Request for Price

    Hydraulic tubes, Hydraulic pipeline, cylinders Pneumatic cylinders, U tube Carbon Steel U Bend Tube are used in varied industries.The use of premium quality steel in the manufacturing of the CS Tube ensures high durability,tensile strength and resistivity to adverse conditions. Meeting the exact specifications and drawings provided by the clients. Additionally,customers are eased with the availability of the Copper Steel Tubes in varied finishes,length and diameters meeting the requisites of the applications. Our bead removal tubes are highly popular for structural purposes and mechanical & general engineering purposes. Made of high quality metals, our bead removal tubes are demanded in both the domestic and International markets. They can also be customized as per clients specifications.Material: TP304,TP304L,TP316,TP316L,TP321,TP310S,TP347H,TP316Ti and so on. Standard:ASTM A 312/213/269,DIN 17458/2462,BS3605/1,JIS G3429/3459,ISO1129/2037/9329,GB/T14975/14976/13296 and so on. Proces:The removal of beads is done as per standard specifications.Bead is cold worked.It is brought in level with the base metal.Before heat treatment on tube mill, bead rolling is made in-line.This will help in recrystallization of weld structure.The weld structure will also homogenize faster in annealing process.Features:Bead removal tubes improve corrosion resistance.It improves easy expansion in tube sheets and orbital welding.It also improves easy flow.There is easier cleaning and less scale deposits.Packing:Wooden cases, bundle or plastic bags, plywood boxes

    ...more
    Get Best Price
  • Threaded Flanges

    Threaded Flanges

    Request for Price

    Threaded Flanges are confined to special applications. Their chief merit lies in the fact that they can be assembled without welding this explains their use in extremely high pressure services, particularly at or near atmospheric temperature, when alloy steel is essential for strength and where the necessary post weld heat treatment is impractical. Threaded Flanges are unsuited for conditions involving temperature or bending stresses of any magnitude, particularly under cyclic conditions, where leakage through the threads may occur in relatively few cycles of heating or stress; sea welding is sometimes employed to overcome this, but cannot be considered as entirely satisfaction. Key Features: Can be attached to the pipe without welding (sometimes an additional seal weld is used as well)Ideal for higher pressure and temperature applications for small pipe sizesNot recommended for larger loads, especially when subjected to higher torque Uses of threaded flanges: Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded. They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible. They are ideal for small diameter piping applications. They are economical and time saving devices. These threaded flanges are normally designed for non-cyclic applications. The flanges are suitable to be used in applications where welding is hazardous. They can be used in highly explosive areas.

    ...more
    Get Best Price
  • Stub Ends

    Stub Ends

    Request for Price

    Stub Ends are fittings used in place of welded flanges where rotating back up flanges are desired. They are also called Lap Joints and Vanstone Flared Laps. A rotating back up flange seats itself against the back surface of the Stub End. When bolts are added, the clamping action of the bolts presses the rotating back up flange against the back of the Stub End. The gasket surface of the Stub End then presses against a gasket and another gasket surface providing joints like standard flange joints. The seal is made by the gasket surface of the stub end alone, the flange only provides the clamping pressure on the joint.Our high quality stub ends (Butt weld fittings ) are tested and verified for durability, accuracy and precision. The stub ends are manufactured in all standard dimensions. The stub ends are provided with a standard weld bevel and can be available in squared, flanged, victaulic and threaded ends. We offer stub ends at highly competitive prices.  Material: A234-WPB A234-WP12 A234-WP11 A234-WP5 A403-WP304 A403-WP304L A403-WP316. A403-WP316L A420-WPL6,316L, 304L, 321, 321H.Size: 1/2" - 24"Types: Type A, Type B, Type C, Type DManufacturing standard: ASME/ANSI B16.9, JIS, DIN, EN, API 5L, etc.Surface treatment:Shot blasted, rust-proof black oilUsage: Petroleum, Chemical, Power, Gas, Metallurgy, Ship-building, Construction, ect.Packing: Plywood Case/ Pallet/ other

    ...more
    Get Best Price
  • Stainless Steel Erw Pipe

    Stainless Steel Erw Pipe

    Request for Price

    Get Best Price
  • Spectacle Blind Flanges

    Spectacle Blind Flanges

    Request for Price

    Separating one part of a line from another requires a spectacle blind, able to switch from closed to open and back again. Bleed rings provide a means to release pressure from the pipe through a controlled opening.Materials used:Stainless Steel: ASTM A182 F304/304L, F316/316L, F316H,F316Ti,F321,F44(UNS S31254)Key Features: Can be attached to the pipe without welding (sometimes an additional seal weld is used as well) Ideal for higher pressure and temperature applications for small pipe sizesNot recommended for larger loads, especially when subjected to higher torque Uses of threaded flanges: Threaded flanges can be fitted to pipes of various sizes without welding and this is one chief benefit for which these flanges are highly demanded. They can be used in extremely high pressure applications, particularly at or near atmospheric temperature, where the necessary post weld heat treatment is not possible. They are ideal for small diameter piping applications. They are economical and time saving devices. These threaded flanges are normally designed for non-cyclic applications. The flanges are suitable to be used in applications where welding is hazardous. They can be used in highly explosive areas. These types of flanges are made from plate, and come in 3 different types. The first and most widely used type are spec blinds – short for spectacle: these are flanges with two equal outside diameter (OD) parts welded together by way of a ‘bridge’. One of the parts also contains an inside diameter (ID), while the other is a blank, or blind. A whole is put at the halfway mark of the bridge. These are also called spectacles, figure 8’s, and figure 8 blanks, because of their resemblance to reading glasses (spectacles) and figure 8’s. These are referred to as ‘Line Blanks’ in the ASME/ANSI standards. The second and third types are quite similar: both have longer bridges, referred to as ‘paddles’, which resemble longer handles. One type has only an OD, and so is a blind plate – similar in appearance to a large pizza oven peel. These are referred to as paddle blinds. The other type is exactly the same but comes with an ID as well, enabling flow-through when installed in a piping system. These pieces have holes in the paddle which enables field personnel to determine by sight which piece is installed in a system. These are referred to as paddle spacers, and are often supplied in sets together with the paddle blinds.All 3 types of these flanges are used in piping systems or pressure vessels where the flow needs to be interrupted from time to time. They are installed between two pipe flanges (as specified above), and by way of a screw inserted into the hole in the bridge or paddle, they are able to rotate or ‘swing’ into and out of position to interrupt or allow the flow, as the user sees fit. 

    ...more
    Get Best Price
  • Socket Weld Flanges

    Socket Weld Flanges

    Request for Price

    Socket welding flange, a popular type of pipe flange, was initially developed for use on small-sized high- pressure piping. The fabrication of this type of flange is similar to that of a slip-on flange. However, the internal pocket of a socket weld flange allows for a smooth bore and better fluid flow. When provided with an internal weld, the static strength of this flange is equal to slip-on flange, but the fatigue strength is 50% greater than double welding slip-on flanges. Smooth bore conditions in such a flange can easily be attained without having to bevel the flange face and, after welding, to re-face the socket weld flange as would be required with slip-on flanges. For this reason, the internally welded flange is popular in chemical process piping. The counter bore is sightly larger than the Outer Diameter of the matching pipe, allowing the pipe to be inserted. A restriction is built into the bottom of the bore, which acts as a shoulder for the pipe to rest on, and has the same I.D. of matching pipe. The flow is not restricted in any direction.  Key Features: The recess on the inside diameter of the socket weld flange allows for a good fit of the pipe allowing for a smooth flow of liquid. Socket welding flanges work well for smaller sizes and higher pressure temperature conditions. They are similar to slip-on flanges, but must specify the schedule of the pipe where they will be used for with socket welds. Standard facing: Raised face, ring - type, flat face, male - female, tongue - groove.welded both inside and out to provide sufficient strength and prevent leakage.They are ideal for low pressure applications. Uses of socket weld flanges: They are ideal for small diameter applications. They are used for high pressure applications. Socket weld flanges have an internal recess on the inside diameter which allow for a smoot flow of the process fluid. They create a smooth bore with the proper welding and grinding.

    ...more
    Get Best Price
  • Slip On Flanges

    Slip On Flanges

    Request for Price

    A Slip-On Flange is bored sightly larger than the outer Diameter of the matching pipe. The pipe slip into the flange prior to welding both inside and outside to prevent leaks.The British standard flanges manufactured by us pertain to all standards like BS10 1962 Table D,E,F,H IS 6392 Table 5,17,26 IS 1538 in slip. These are manufactured using mild steel both in slip-on and blind type. Our quality slip on flanges are ideal for lower pressure applications. Their ease of fitting and welding reduces fabrication costs. Our professional engineering team is involved in innovating durable and high-quality products to cater to our clients' needs.  Detailed Product Description of Slip-On Flange :The slip-on flange has a low hub because the pipe slips into the flange prior to welding. It iswelded both inside and out to provide sufficient strength and prevent leakage.They are ideal forlow pressure applications. Material specifications:Stainless steel : 304,310,316, f10,321 Standard dimensions:  strong Ranging: 0.5" to 24" as per ANSI b16.5, bs 4504, bs-10, asme b 16.36. 26" - 72" as per mss sp44, api -605, awwac-207-55, asme b 16.47, bs 3263   Standard ratings: Pounds:150,300,400,600,900,1500 and 2500 Standard facing: Raised face, ring - type, flat face, male - female, tongue - groove.welded both inside and out to provide sufficient strength and prevent leakage.They are ideal for low pressure applications. Advantages of slip on flanges: Low cost installation Less time needed to spent on ensuring the accuracy of the cut pipe They are somewhat easier to align The slip-on flanges have low hub because the pipe slips into the flange before welding The flange is welded both inside and outside to provide sufficient strength They prevent leakage

    ...more
    Get Best Price
  • Stainless Steel Sheet

    Stainless Steel Sheet

    Request for Price

    User Industries: Chemicals, Fats, & Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship Builders, Paper Industries, Pumps, Petrochemicals, Oil & Natural Gas Organization in terms of the specific materials, Technology, Finance & Personal. Product Range: The following table represents size range, product standards and material grades of Sheet, Plates & Coils Size : - 1/2" NB (15mm) TO 48"NB (1200mm). Packing : - Superior Quality Polythene Bag and Standard Wooden Box.   Stainless & Duplex Steel RANGE1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL. Stainless SteelASTM / ASME SA 240 304 , 304L , 309S , 310S , 316 , 316L , 316 TI , 317 , 317L , 321 , 347 , 409 , 410 , 410S , 430  Duplex SteelASTM / ASME SA 240 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.    Nickel & Copper Alloy RANGE1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL.  Nickel AlloyASTM / ASME SB 162 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )ASTM / ASME SB 127 UNS 4400 (MONEL 400 )ASTM / ASME SB 424 UNS 8825 (INCONEL 825)ASTM / ASME SB 168 UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )ASTM / ASME SB 443 UNS 6625 (INCONEL 625)ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )ASTM / ASME SB 462 UNS 8020 ( ALLOY 20 / 20 CB 3 ) Copper AlloyASTM A 335, GR P1, P2, P5, P9, P11, P22, P91    Carbon & Alloy Steel RANGE1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL.  Carbon SteelASTM / ASME A 516 / 517 GR. 60 / 70 , IS 2062 , IS 2002  Alloy SteelASTM / ASME A 387 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91. 

    ...more
    Get Best Price
  • Round Bars

    Round Bars

    Request for Price

    Grade : 304, 304L, 316, 316L, 316Ti, 321, 317, 317L, 310Packing :- Superior Quality Polythene Bag and Standard Wooden Box.Stainless Steel : ASTM A 409, A 182, A276 Stainless Steel : A105, ISO 2062 Nickel Alloy : B162, B127, B463, B576, B168, B443 Copper Alloy : Aluminium, Copper, Brass & Gunmetal Alloy Steel : A182, Gr. F1, F2, F11, F22, F5, F9, F91   Specifications :ASTM, ASME, AISI, AMS, AFNOR,QQS, B.S, JIS, DIN, MILS and NACE.  

    ...more
    Get Best Price
  • Reducing Flanges

    Reducing Flanges

    Request for Price

    Reducing flanges are designed for use in changing diameters in a piping system. A reducing flange comprises a flange with one specified diameter having a bore of a different and smaller, diameter. Except for the bore and hub dimensions, the reducing flange will have dimensions of the larger pipe size. These flanges are used at the outlet side of the expansion joint to increase the size of the flange. This is considered to be an economical method to make a transition in size. Specifications:Stainless Steel Grades:  304, 304L, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 409, 410, 410S, 420, 430 Nickel Alloy Grades:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hestelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)   Uses of Reducing Flanges: Reducing flanges are used in pipe-to-pipe connections. Reducing flanges are a little easier to bolt up than non-reducing flanges. They provide the most perfect solution when you need to connect different size flanges. These flanges are available in all types and pressures. Reducing flanges are fixed by welding, gluing or clamping flanges of equal dimensions provided with different connecting pieces. They offer the simplest and least expensive method of mating two different sized flanges.

    ...more
    Get Best Price
  • Pipe Tee

    Pipe Tee

    Request for Price

    Pipe Tee is a type of pipe fitting which is T-shaped having two outlets, at 90o to the connection to the main line. Pipe Tee is a short piece of pipe with a lateral outlet. Pipe Tee is used to connect pipelines with a pipe at a right angle with the line. Pipe Tees are widely used as pipe fittings. These are made of various materials and available in various sizes and finishes. Pipe Tee is extensively used in pipeline networks to transport two-phase fluid mixtures.    Specifications Material : Stainless Steel: Astm A403 Wp 304 / 304l / 316 / 316l / 317 / 317l / 321 / 309 / 310 / 904l, Etc. & also in Cs, as As per Standard. Size : 1/2" to 24" Pressure : Sch 5s to Sch Xxs. Industrial Applications Include : Chemical processing Petroleum Pulp paper Refining Textile Waste treatment Marine Utilities power generation Industrial equipment Automotive Gas compression and distribution industries Pipe tees are also recommended for industrial plant fluid power systems.   Features of Pipe Tees : Pipe tees are widely used in various commercial and industrial applications. There are three female openings in a t shaped pipe tee. There are straight pipe tees which have the same size openings. Reducing pipe tees have one opening of different size and two openings of the same size. There are sanitary pipe tees which are used in waste lines. These kind of pipe tees have a curved branch which is designed for a clean out plug. They are used to prevent obstruction of waste. A cross pipe tee has four equal sized female openings. A wing pipe tee has lugs to fasten the fitting to a wall or stud. A compression pipe tee uses compression fittings on two or more ends. A test pipe tee has a threaded opening. This opening is used in conjunction with a threaded plug for a clean-out opening on a drain pipe

    ...more
    Get Best Price
  • Pipe Reducer

    Pipe Reducer

    Request for Price

    Pipe reducer are tube fittings that are widely used in a number of industries in order to providing greatest connection flexibility in connecting fractional tubes in various installations. Pipe reducer is a kind of pipe fitting that joins two pipes of different diameter. The pipe reducers are available in a range of materials depending on the end use of the products and these fittings are manufactured in inch and metric size. Pipe reducers are special type of tube fittings that are commonly used in the demanding environments of chemical and power plants. They provide a highly reliable, sturdy and tight integral line system and these type of pipe fittings remain unaffected by shock, vibration or thermal distortion. These pipe fittings are very easy to install and they resist leakage due to thermal or pressure cycling. These reducers are sometimes chrome or nickel coated to prevent corrosion and increase the life of the product.An Eccentric reducer, also called a Bell reducer, has two female (inside) threads of different sizes with centers so designed that when they are joined, the two pieces of pipe are not in line with each other, but they can be installed so as to provide optimum drainage of the line. 

    ...more
    Get Best Price
  • Pipe Flanges Gaskets

    Pipe Flanges Gaskets

    Request for Price

    Pipe flange gaskets are used for improved joint performance. They are considered much more superior than the conventional ring or full-face gaskets. Although pipe flange gaskets are usually used for all normal water and sewer service, they are especially useful in demanding services like in very large diameter flanged piping. For specially designed long-span installations, involving 2 or 3 or more lengths of pipe or with any underground flanges, flange gaskets are of great help because they could be subjected to undesirable beam loading. These gaskets are available in numerous standard materials in various thickness and hardness options for various flange sizes. Flange gaskets are also available with adhesive on one or both sides or without adhesive. Most materials are available starting at 1/32” thick and can be supplied up to 1” thick. Some manufacturers supply flange gaskets in wide rolls from which you can cut your flange gaskets to size. Flange gaskets are also available to your exact requirements. Pipe flange gaskets are being very frequently used for flanged joints which are subjected to extreme chemical attacks.   Materials used:Flange gaskets are made of various materials like: Rubber: Neoprene, EPDM, Nitrile, EVA, Silicone, Cork and Cork Rubber Closed Cell Foam: Cross-linked Polyethylene, PVCPlant Fiber Cellulose FiberMetal: Steel, Stainless Steel, Aluminum, Copper, Cast iron etc.General: Nonrotatable flanges with clearance bolt holesNominal OD sizes: 12 3/8 to 27 1/8 inchesTube OD sizes: 10 to 24 inches Materials Flanges: 304 stainless steel (316L available upon request) Bolts: 18 - 8 stainless steel Vacuum range: >=1 x 10^-13 Torr - UHV Temperature range: -200°C to 450°C Applications of Typical Flange Gaskets: HVAC (Heating, Ventilation, and Air Conditioning) Industry: Usually, flange gaskets used in this industry are made of different types of rubber. They are usually supplied with adhesive on one or both sides in various shapes like round (I.D. x O.D.), rectangular and square outside shapes. Flange Gaskets are available for wide flange configurations. Plumbing Industry: Here, the standard ring and full face flange gaskets are available in various styles. Sheet Metal Enclosures: The flange gaskets used here are normally rectangular in shape. They come with adhesive on one side which is used as a gasket to seal out dust, liquids or air. Electronic, food, medical, chemical and packaging industries: The flange gaskets used here have a flat surface that is compressed between two flanges.

    ...more
    Get Best Price
  • Pipe Flange Gaskets

    Pipe Flange Gaskets

    Request for Price

    Feature : Resistant to corrosion,Durable finish standards,Optimum performance

    Get Best Price
  • Orifice Flanges

    Orifice Flanges

    Request for Price

    Orifice flanges are used instead of the standard pipe flanges when orifice plate or flow nozzle is used. The basic purpose for this is to measuring the flow rate of either gases or liquids in the respective pipeline. These flanges are used in various industrial applications and are available in various sizes and materials. Specifications: Stainless Steel Grades: 304, 304L, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 409, 410, 410S, 420, 430 Nickel Alloy Grades:Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hestelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)  Size : 1/8" NB TO 48"NB.Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.Uses of Reducing Flanges: Reducing flanges are used in pipe-to-pipe connections. Reducing flanges are a little easier to bolt up than non-reducing flanges. They provide the most perfect solution when you need to connect different size flanges. These flanges are available in all types and pressures. Reducing flanges are fixed by welding, gluing or clamping flanges of equal dimensions provided with different connecting pieces. They offer the simplest and least expensive method of mating two different sized flanges.

    ...more
    Get Best Price
  • Large Size Flanges

    Large Size Flanges

    Request for Price

    Large-diameter steel flange is made of carbon steel and stainless steel flanges. Good ductility low carbon intensity is low, after adding suitable amount of carbon will become hard, plastic lower intensity increased. Flange connection may need to withstand very high tensile, compression, torsion, shear strength, carbon steel flange is the better choice.Independently developed by the factory cold Volume flange equipment and advanced technology. Portland opened up a law without CALCINED made the production of welding and many of the processes, raw materials, forming a one-time, that is, to speed up the production process and efficiency, while product quality has been ensured.Related products include:large diameter flange piece, large diameter stainless flanges, stainless large diameter flanges, large diameter flat welding flanges, large diameter butt welded flangeMaterial : Stainless Steel Grades: 304, 304L, 309, 310, 310S, 316, 316Ti, 316 L, 317, 317L, 321, 347, 409, 410, 410S, 420, 430  Standard: JB82-59, HG5016-58, HG20595-97, JB/82.1-94Package: Plastic bages/ Plywood boxes/ Bundle/ Shockproof packa  

    ...more
    Get Best Price
  • Lap Joint Flanges

    Lap Joint Flanges

    Request for Price

    Lap Joint flanges are used on piping fitted with with lapped pipe or with lap joint stub ends. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These flanges are also used in applications where there is a need to facilitate bolt alignment. These type of flanges are similar to slip-on flanges. The only difference is that it has a curved radius at the bore and face to accommodate a lap joint stub end. They may be used at all pressures and are available in a full size range. These lap joint flanges slip over the pipe, and are not welded. They are otherwise fastened to it. Here the bolting pressure is transferred to the gasket by the pressure of the flange against the back of the pipe lap. Material:Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276 Size : 1/8" NB TO 48"NB.Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.Standard :ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48DIN :DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673B.S : BS4504 , BS4504, BS1560, BS10Advantages of Lap Joint Flanges:Lap Joint flanges have certain special advantages over other flanges. These are as follows: Lap Joint flanges have the freedom to swivel around the pipe. This facilitates the lining up of opposing flange bolt holes. Lack of contact with the fluid inside the pipe leads to the greater durability of these flanges. In piping systems which corrode or erode quickly, the lap joint flanges may be salvaged for re-use. The pressure-holding capacity of lap joint flanges is little. But it is better than that of slip-on flanges. The Lap Joint works as a backing ring on the stub. The main advantage of lap joint flange is that the bolt holes can be aligned with the matching flange after the welds have been completed. They allow rotational alignment capability.

    ...more
    Get Best Price
  • hoses fitting

    hoses fitting

    Request for Price

    Stainless Steel Fittings Components Parts :-   Stainless Steel Fitting ComponentsStainless Steel Fittings Components S.S. Bar turned components for plumbing and general engineering use, Machined from high quality AISI 304 /316 material. Stainless steel hose Nipples Stainless steel Hose barb fittings Accessories Stainless Steel fittings Unions Screws Stainless Steel Ferrules Sockets Nuts Bushes Stainless Steel SS S.S. Twin Ferule compression fittings Stainless Steel connectors Plugs etc.

    ...more
    Get Best Price
  • Flanges

    Flanges

    Request for Price

    As the mainstay of our business, we are dedicated to providing our customers with all possible options of flanges in a wide variety of steel, chrome, and nickel alloys. Pipe Flanges are widely used as a popular category of pipe fittings. A flange is used to mechanically connect two pipes together. It can also be used to mechanically connect a pipe to a tee, valve, choke or any other piece of equipment. Flanges are available in round, square, and rectangular shapes. In some cases, flanges are usually in the shape of a ring or a plate to form a rim at the end of a pipe when fastened to the pipe. This is an example of closet flange. A flange can also be a plate for covering or closing the end of a pipe. This is a blind flange. Thus, flanges are considered to be projecting or internal components which are used to support mechanical parts. They are like rims which are used to strengthen the mechanical part or they are a means of attaching that part to another part or surface. Uses of pipe flanges: Flanges are used for variety of purposes. The main purpose is to connect pipes but they are also used for connecting other equipments. Flanges are fit to a variety of other components besides pipes. They are fitted to bellows, ducts, wheels, and cameras. We give below the various uses of pipe flanges: Flanges are also placed on beams to provide additional strength. They prevent the beam from failing. They are used for guide, as the flange of a train wheel. Flanges are used for attachment to another object like for example, the flange on the end of a pipe, steam cylinder, etc. They are fixed on the lens mount of a camera. A flanged rail is a type of rail with a flange on one side to keep wheels from running off. Designs of flanges:Butt weld, Socket weld, Captive, Split, Square, Round, Rectangle etc.Material grades: Low Temperature Steel: A350 LF2, LF3, LF6 Nickel Alloys: 200, 400, K500, 600, 625, 800, 825 Stainless Steel: A182 F304/L, F310, F316/L, F316Ti, F321/H, F347/H, F410, F440, 904L

    ...more
    Get Best Price
  • Erw Pipes

    Erw Pipes

    Request for Price

    We offer a huge array of steel pipes that are fabricated by using various grades of material steel and metal alloys. These are available in single welded or double welded form. Our clients have the option to choose pipes with radiography or without radiography. Seamless steel ERW pipes and ERW pipes are fabricated in different alloys of ASTM / ASME SA 312 GR. TP 304 , 304L , 309S ,, 310S, 316 , 316L, 316Ti , 317 , 317L , 321 , 347 , 904L ASTM / ASME SA 358 CL 1 & CL 3 GR . 304 , 309S ,310S, 316 , 321 , 347 and others. Our comprehensive range includes welded stainless steel pipes, ERW alloy steel pipes, welded steel pipes and many more. We produce using ace quality of steel and alloy to retain their durability for longer period. SEAMLESS STEEL ERW / WELDED PIPES AND TUBES RANGE :15 NB UP TO 600 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS SEAMLESS TEEL ERW / WELDED PIPES AND TUBES TYPE ERW / WELDED SEAMLESS STEEL ERW / WELDED PIPES AND TUBES FORMROUND, SQUARE, RECTANGULAR, HYDRAULIC ETC. SEAMLESS STEEL ERW / WELDED PIPES AND TUBES LENGTHSINGLE RANDOM, DOUBLE RANDOM & CUT LENGTH SEAMLESS TEEL ERW / WELDED PIPES AND TUBES ENDPLAIN END, BEVELLED END, TREADED SEAMLESS STEEL ERW / WELDED PIPES AND TUBES VALUE ADDED SERVICES Hot Dip GalvanizingElectro PolishDraw & Expansion“ Surface Finishing : Mirror finish, matt Finish, annealed, pickled, super mirror etc

    ...more
    Get Best Price
  • end caps

    end caps

    Request for Price

    The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. They are used in the plumbing apparatus of domestic, commercial and industrial water supply lines, machinery and processing equipment etc. They are also fitted on water pump lines with the sole purpose of removing air blocks. Pipe caps are highly demanded as an important category of pipe fittings.Fabricators of all types and grades of pipe have used our caps to protect ends and keep out dirt and other foreign material. Pipes capped with Wedge end caps arrive at the project site in perfect shape and ready for installation. Material: A234-WPB A234-WP12 A234-WP11 A234-WP5 A403-WP304 A403-WP304L A403-WP316. A403-WP316L A420-WPL6,316L, 304L, 321, 321H.Size: 1/2" - 24"Manufacturing standard: ASME/ANSI B16.9, JIS, DIN, EN, API 5L, etc.Surface treatment:Shot blasted, rust-proof black oilUsage: Petroleum, Chemical, Power, Gas, Metallurgy, Ship-building, Construction, ect.Packing: Plywood Case/ Pallet/ other

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers
  • Year of Establishment 2010
  • No. of Employees 20 - 50
  • Annual Turnover Rs. 2.5 to 5 Crore Approx.
  • Ownership Type Individual (Sole proprietorship)

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Shikhar Steel Corporation are Importer & Exporter of Stainless Steel Flanges, Pipe Fittings & Pipes. We are also highly manufacturers of Flanges, Pipe Fittings & CNC components. Shikhar Steel Corporation are become one of the most reliable source for quality product within a short span of time.
We are leading exporter and domestic supplier of all kinds of industrial raw materials in Carbon Steel, Stainless Steel & Nickel Alloys in form of pipe, sheet, coil, bar, fittings, flanges & fasteners. Most of our clients are Government & Public sector undertaking companies like Defense, Fertilizer, Chemical, Power, Petroleum, Valve manufacturer and Thermal Power etc. We specialize in providing products and services of highest quality standards to our customer and compiling with customer specification, codes, standards, statutory and regulatory requirements.
With the years of experience in international market and an in-depth understanding of the industry, we are capable to provide our customers with best possible solutions to meet their various requirements. We possess a well maintained warehouse that enables us to keep stock of our products thus we provide a perennial supply of goods to our customers. Our international standards of packaging have facilitated us to create a niche for ourselves in the industry.
Apart from exporting products, we also outsource our products according to the requirements of our associates and clients. Committed to providing highest level of customer satisfaction, we are capable to deliver the orders within stipulated period of time to our clients in any part of the world.
Our Team :
We are supported by some of the most qualified and technically sound professionals, who are well aware about different techniques required to manufacture products. Our team members hold vast industry experience, which help them in sourcing quality raw material from reputed vendors. They are well versed with the quality testing process of these precision engineered components.
Our team comprises the following competent members:
Engineers
Quality controllers
R&D experts
Skilled workers
Warehouse professional
Why Us :
We are a renowned name in this domain engaged in providing various types of SS, CS & AS Products. Owing to our excellent product quality and transparent dealings, we have gained immense clients' appreciation.
We are trusted by our customers for the following reasons :
Superior quality products
Cost-effective rates
Timely delivery of products
Easy payment modes
Good Financial Position & TQM
Customized solution
Customized packaging
Read More »

Contact Information

Shikhar Steel Corporation

  • Mr. Vinod Bhansali
  • 43, Pavwala Building, 3rd Kumbharwada, Mumbai, Maharashtra
top