TEFC Motors Dealers in Mumbai (11 products available)

• Voltage: 11 KV
• Frequency: 50 Hz

TEFC Squirrel cage induction HV Motors comply with the requirements of IEC 34-1, the relevant parts of BS4999 and BS5000, IS:325 & other relevant Indian standards. They are designed for continuous duty corresponding to Duty Type S1 of IEC 34-1 and BS4999, part 101 section 3, with a temperature rise by resistance not exceeding 80K in a maximum ambient temperature of 40°C. The standard rated outputs are taken from the R40 series of preferred numbers in accordance with the requirements of clause 7 of BS4999 Part 101 and Part 1 of IEC 34-1. For enquiries with intermediate ratings the next highest preferred rating will be offered and performance data will be quoted accordingly

• Speed: 2000- 6000 RPM
• Power: <10 kW
• Phase: Single Phase
• Type of Motor: AC
• Material for Construction: Stainless Steel, Cast Iron
• I Deal in: New only
• Features: Energy Efficient Motors. Rated output for a variation of ± 10% in voltage and ± 5% in frequency and +10% combined variation.

We offer wide range of Crompton Greaves Low Voltage motors in Cast iron and Aluminum constructions conforming to International Electro technical Commission (IEC) and NEMA MG1 Standards ,We also offer custom built Crompton Greaves motors with complete solutions , engineered for special and critical applications.  

• IS 325: Three phase Induction motors-specification
• IS : 12615:2011: Energy Efficient Induction Motors - Three Phase Squirrel Cage
• IEC 60034-30:2008: Efficiency classes of single speed, three phase, cage induction motors (IE code)
• IS/IEC 60034-1:2010: Rotating Electrical Machines: Part 1 Rating and performance
• IS/IEC 60079-0:2004: Electrical apparatus for Explosive gas atmosphere – Part 0 General Requirements
• IS/IEC : 60079-1:2007: Electrical apparatus for Explosive gas atmosphere - Equipment protection by flame proof enclosures "d"
• IEC :60079-15:2010: Electrical Apparatus for explosive gas atmosphere-- Construction, test & marking of type of protection "n" electrical apparatus.
• IS 5572:2009: Classification of hazardous areas (other than mines) having flammable gases and vapors for electrical installations.
• IS 15142:2002: Guide to the use of electrical apparatus for potentially explosive atmosphere in the presence of combustible dust.
• IS 5571:2009: Guide for selection and installation of electrical equipment for hazardous areas (other than mines)
• IEC 60072-1:1991: Dimension & output ratings of rotating electrical machines
• IEC 60072-1:1991: Dimension & output ratings of rotating electrical machines
• IS : 900:1992: Code of practice for installation and maintenance of induction motors
• IS : 1231:1974: Dimensions of foot mounted A.C induction motors
• IS : 2223:1983: Dimensions of flange mounted A.C induction motors
• Type MH: 0.37 kW 315 kW,
• Frame 71: 355L
• Type MH: 0.37 kW 315 kW,
• Frame 71: 355L

• Power: 10-200 KW
• Speed: 750-2000 RPM
• Voltage: 415 V
• Brand: Kirloskar
• Usage/Application: Industrial
• IP Rating: IP55
• Motor Brand: Kirloskar
• Mounting: Foot, Flange, B35
• No Of Phase: Three Phase
• No Of Poles: 2-8
• Frame: 71 - 355 dimensions as per IS 1231
• Output: 0.37kW to 315 kW

We, as a main Supplier and Exporter, offer Standard 3PH TEFC Motor. It is obtained from the vendors who constantly deliver unrivaled quality. It is cherished for its sturdy frame, easy installation and low maintenance. We make it available at for delivery in protective packages. It is available for our prized customers at cost effective rates. Get this incomparable quality on offer delivered at your doorstep.   Features : Vacuum impregnation of winding. In-house gear manufacturing/heat treatment. Non-standard/Custom built special motors.

Energy Efficiency level 2 as per IS:12615 » Energy Efficiency as per CEMEP Standards prevalent in Europe » 'V' seal arrangement up to 355 frame - Easier assembly of bearing housing » Integral bearing cover with endshield up to 225 frame » Larger terminal box for accommodating bigger Aluminium cables » Sophisticated CNC Machines, Most Advanced Manufacturing Technology & Test Plant - Improved reliability.

• features: Near uniform efficiency from 50% to 100% of full load

Use of these motors can lead to substantial reduction in energy costs. The payback periods are in the order of 3 to 6 months depending upon the usage. Replacing existing motors with High Efficiency IE2 Motors even in power intensive industries gives a payback within 1 to 2 years.

BBL motors can be continuously overloaded by 10% or can be used up to ambient temperature of 55°C. Temperature rise will be as per Class F limits.All motors up to 280M frame are designed for 50°C ambient.2Z Bearings are standard up to 180L frame which are filled with high temperature grease suitable up to 140°C.Additional anti tracking protective coating of air drying varnish is applied on the winding overhangs.

TEFC & Flame Proof Motor, Single Girder Electric Wire Rope Monorail Hoist

Three Phase Ac Motors TEFC Slipring Type, 3-Phase Cast Iron Electric Motor