Testing Equipment Dealers in Nityanand Nagar, Mumbai (40 products available)

In this Salt Spray Apparatus Chamber, coated articles viz. Electroplated, Painted, Anodising, etc are exposed to a mist of salt. Saturated air produced by spraying common salt solution in an enclosed Cabinet. The articles being positioned for this accelerated corrosion test in such a way that they are exposed to the hot mist produced in the chamber, through the controlled and regulatable air and liquid nozzles.   Standard sizes:a) 915 x 510 x 310 mmb) 450 x 250 x 250 mmThe Apparatus consists of :« Acrylic mist chamber with dome roof « Heater « Temperature Indicator and Controller « Atomizing nozzles for mist formation « Specimen supporter « Compressed air supply The apparatus comprising of Double Chamber FRP body, having internal size : 850 x 655 x 825 mm ht., Dome roof, volume 455 ltrs, suitable for housing 120 Numbers of standard panel size : 150 x 100 mm    Ÿ Humidity Chamber Ÿ Water level controller Ÿ Humidity Controller Ÿ Mica plate heaters Ÿ Temperature indicator 500C display cum - controller Ÿ filtered salt solution feed of min 0.5 liters per hour Ÿ 130 litressalt solution reservoir Ÿ Peristaltic Pump Ÿ Large specimen testing capacity Ÿ Easy access to test panels Ÿ Hour counter Ÿ Control panel with main switch.    

Easy to read LCD Display 3-1/2 Digits 1999 Counts High measuring Accuracy Measurements possible even under strong magnetic field LSI Circuit Provides high reliability and durability Light Weight and compact construction Range: 0 – 200p / 2n / 20n / 200n / 2u / 20u / 200u / 2000u / 20000uF Accuracy: ± 0.5%

• Input power Supply: 220 Volts ± 10, 50HZ AC single phase
• Output Test Current: Refer Table no.1
• Output Test Current Range: Refer Table no.1
• Duty Cycle: 10 minutes ON -20minutes OFF
• Mode of Operation: Manual or Motorized
• Protections and Safety: Overload Protection by MCB. HRC fuse protection for control circuit
• Indications: Bright LED Indicators are provided for Input and Output Indication
• Cooling: Air/Oil Cooling
• Control: One Knob control to vary Output current

EMS is dedicated software packed for the monitoring and management of electrical, water, gas and thermal energy metering systems. Energy Management Systems are intelligent systems designed to monitor & control the energy consumption of homes (Home Energy Management System - HEMS), buildings/offices (Building Energy Management System - BEMS), or estates/campuses.

• Weight: 90 Gm
• pH Range: -1.0 To 15.0 PH
• Brand Name: Thermo Scientific
• Model Name/Number: pHTestr 10
• Usage/Application: Research purpose, Labs
• Type Of Ph Meter: Hand-Held
• Dimension: 16.5 x 3.8 cm
• Resolution: 0.1 pH

Leak test apparatus This apparatus is an ideal instrument to check sealing integrity of Blister Packs; Strip Packs; Sachet and Pouch Packs etc. It is also used for checking leaks from Capped Bottles; Induction Sealed Containers; Sealed Or Crimped Tubes etc. The instrument is equipped with long lasting vacuum pump, which gives high level of vacuum (up to 550 Hg) in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for long time.

• Features: Programmable high/low setpoints, Clockwise and counterclockwise operation, Tare function, AC adapter/charger and carrying case.
• Accuracy: ±0.5% F.S. ±1 LSD
• Clamps container diameter: 1/2" to 8"

  Flow Meters: Chemtrols is a solution provider of Flow Measuring instuments based on various principals to meet the application requirements of process plants, briefly summarized below.   Flow Measuring Sensors : Besides, we also offer a wide primary Flow measuring Sensors like Orifice, Flow Nozzles, Venturi Tubes, Cone Flow Meters and Pitot tubes. Orifice & Nozzles :   Primary Differential Pressure devices   Chemtrols offers a wide range of primary differential pressure devices to measure flow, based on various principles of physics. These include flow elements like the Measuring Orifice, Restriction Orifice, Flow Nozzles, Venturi Tube, Cone Type flow meter, Taper Seg Tube, Pitot tubes and related accessories like the Condensate Pots, Fittings etc. in conjunction." Orifice Plates & Flanges : These primary devices like the Measuring Orifice and restricted orifice are used for fluid & gas flow measurement by means of the differential pressure and also pressure reducing devices, are intended on pressure drop and steady fluid flow. Also View Flow Metering Metering Skids for Gases and Liquids Level Instruments Temperature Mechanical Products Oxygen Analyzer / Sensor Metal Tube Rotameters Download

This panel meter is designed for dual source energy measurement. It serves as a replacement for two separate energy meters, necessary for metering applications with dual energy sources. Features: LCD display Class 1 accuracy ACDC auxiliary supply RS 485 communication Password protected CTPT value programming Separate registers available for measurement of utility power and generator power Dimensions: 96 L x 96 B x 105 D mm

Cabinet constructed from non-corrodible high temperature resistant glass reinforced plastic. Acrylic cover is provided. Constructed in fiber-reinforced plastic, 10 mm thick with stiffners at the bottom to take heavy load. The FOG Chamber conforms to ASTM B 117 specification. The volume is of sufficient size to test adequately the desired number of parts without overcrowding. The apparatus consists of a fog chamber, a salt solution reservoir, a supply of moisture free compressed air, atomizing nozzles, specimen supports, provision for heating the chamber, humidifying chamber and control system. The fog chamber is provided with digital temperature controller, pressure gauge, provision for controlling the mist, humidity indicator and solenoid valve to regulate these conditions. Capacity : 100, 200, 400 and 600 Litres.

• Dimensions: 327 H x 187 B x 104 D mm

The 3 Phase CT Operated Trivector Meter is designed for metering of HTLT consumers and for feeders. The meter has advanced data and tamper recording capabilities and is provided with communication ports. Software is available for data collection, load survey analysis and energy management applications. The meter can be interfaced to a variety of communication devices.

We offer Stability Test Chambers to be used as PharmaceuticalsDrug Stability Chambers and Pharmaceutical Test Chambers. Our Stability Test Chambers are specially designed to conduct stability and shelf life studies on drugs and drug related substances and used extensively in the research works to define the product life cycles and also to detect the minute defect in the products.

Vacuum testing of smaller components (without gas handling) This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test chamber. Vacuum testing of larger components (with or without integrated gas handling) We manufacture systems of this model range with a chamber volume of 500 l to approx. 20,000 l. We recommend this model range where larger components need to be tested or where integrated gas handling in the test chamber is required. In this case, the test objects are filled with SF6 in the chamber. Gradual evacuation and filling of the test objects is also possible in order to avoid an inadmissible differential pressure between the test object and chamber. An advantage for users in the field of energy technology: When testing SF6-filled control system components, SF6 can remain in the test object after testing. This makes the SF6 test method an interesting alternative to the known helium leak test in the field of GIS production as it is not necessary to recover the test gas from the test chamber after completion of the test process. As a consequence, the SF6 test method has a shorter handling time per test unit.

• Type: Hardness Tester
• Usage: Hardness Testing
• Color: Green, Light Green, Sky Blue
• Operating Type: Automatic, Semi Automatic
• Specialities: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish
• Warranty: 1year, 2years
• Condition: New

• Brand Name: WADEGATI
• Grade: Manual
• Display Type: Digital

We are the leading exporters and supplier of this products.

The technology used on our home use body composition monitors is based on the same advanced technology found in professional body composition analysers widely used bydoctors, medical centres and by professional athletic teams. It is a first choice for professionals.

We are offering ultrasonic leak detector. it represents the state of the art in ultrasonic technology for leak detection and preventive maintenance. It is extremely sensitive to the ultrasonic sound of turbulence and friction that is associated with costly equipment faults. Using a technique called ‘heterodyning’, the usl 10 translates the otherwise inaudible ultrasound to a lower frequency where it can be heard through a set of headphones as wells as identified on a display. It delivers a clear ultrasonic sound reproduction making it possible to distinguish leaks. This is a very versatile leak detector! the usl 10 is sensitive only to a specific band of ultrasound, and is not chemical dependant. It can detect any gas (refrigerants, cng, compressed air, nitrogen, vacuum and more) and doesn’t false alarm from stray gases. It is not affected by wind, sunlight or sudden temperature changes and does not require sensor replacement or calibration.

Large residential, retail and office buildings are the face of economic growth and development today and house a large segment of the urban population. Such setups require huge air-conditioning and ventilation systems that are run by centralized cooling plants. The cooling energy is a centralized resource but is generally shared by a number of occupants in the building. It is understood that they have diverse patterns of usageand so it becomes important to monitor and measure cooling energy with the help of fool proof BTU metering and automated meter reading systems. By providing these we facilitatedevelopers to measure & bill occupants accurately as per their individual energy usage and to recover the costs of generating and distributing the same in a fair manner to all parties involved.

Leading manufacturer and exporter from mumbai, our product range includes pharma testing equipments such as vacuum oven ( rectangular), muffle furnace, stability chambers, walk-in stability chamber, photostability chambers, plant growth chambers and many more items.

We are offering Benchtop Conductivity Meter

Electric Line Tester, PDU IEC C-19 10 Socket Power Distribution Unit

ultrasonic hardness tester, Hot Melt Dispenser, hot melt coaters

Seal for Electricity Meter, Plastic Strip Seals, SUNBIRD I PLASTIC SEAL

Home Energy Monitoring system, OHM Assistant electricity monitor

broadband tester

Clamp Meter, Electronic Parts, Interactive Projector, Lcd Projector

PVC, contact cards, FILMS, Identity Cards, Lamination Rolls, Lanyards

all types of testing equipment, Seal Less Magnetic Driven Pump

Testing Equipment, scientific instrument, measuring equipment