Titanium Alloys Dealers in Bhuleshwar, Mumbai (51 products available)

• Material: Round Bar & Sheet
• Thickness: 1mm to 60mm in Sheet & 3mm to 200mm in Round Bar
• Length: 3000mm
• Application: Aerospace
• Grade: Ti6Al4V (titanium Grade 5)
• Place of Origin: Imported

Titanium alloys are metals that contain a mixture of titanium and other chemical elements. Such alloys have very high tensile strength and toughness (even at extreme temperatures). They are light in weight, have extraordinary corrosion resistance and the ability to withstand extreme temperatures. However, the high cost of both raw materials and processing limit their use to military applications, aircraft, spacecraft, medical devices, highly stressed components such as connecting rods on expensive sports cars and some premium sports equipment and consumer electronics. Although "commercially pure" titanium has acceptable mechanical properties and has been used for orthopedic and dental implants. Grades of Titanium Titanium Grade 1 is the most ductile and softest titanium alloy. It is a good solution for cold forming and corrosive environments. ASTM/ ASME SB-265 provides the standards for commercially pure titanium sheet and plate. Titanium Grade 2 has moderate strength with excellent cold formability, weldability. This titanium also has excellent resistance to high oxidization. It's available forms are a seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings, and flanges. Titanium Grade 3 is an unalloyed titanium grade (CP titanium = commercially pure titanium) with medium oxygen content. characterized by high strength. The grade is typically used for matrix-plates i-shell and tube heat exchangers. Titanium Grade 4 is a much stronger version of Grades 2 and 3 with cold formability and reduced ductility. It's available forms are a seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings, and flanges. Titanium Grade 5 also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4, is the most commonly used alloy. It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties (excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti). Among its many advantages, it is heat treatable. This grade is an excellent combination of strength, corrosion resistance, weld, and fabricability. Titanium Grade 7 contains 0.12 to 0.25% palladium. This grade is similar to Grade 2. The small quantity of palladium added gives it enhanced crevice corrosion resistance at low temperatures and high pH. Grade 7 also has excellent weldability and formability. Titanium Grade 9 / Titanium 3AL2.5V is a medium strength alloy with good weldability and cold fabricability for mildly reducing to mildly oxidizing media. It is commonly used in aircraft tubing for hydraulics and in athletic equipment. Titanium Grade 12 is a titanium grade alloyed with molybdenum and nickel. It is characterized by excellent corrosion resistance in reducing and oxidizing environments and offers better heat resistance than pure titanium grades. It is suitable for applications such as shell and tube heat exchangers and is typically used within, for example, the chemical industries. Titanium Grade 19/Titanium Beta C is a heat treatable, having very high strength alloy with good resistance to stress and corrosion in high temperature. Titanium Grade 23 / Titanium 6AL4V ELI has an improved ductility, toughness in the air, and saltwater environments. It is also used in a non-aged condition for maximum toughness. It's available forms are a seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings, and flanges. Titanium Alloys are available in the form of Sheets / Plates, Rods / Bars, Flats, Circle, Forgings, Rings.   Titanium Wires :We have wide range of Titanium Wire available from Dia 1 to Dia 5mm in All possible Grade like Grade2, Grade 5, Grade 5ELI Etc Titanium BarsWe have a wide range of Titanium Bars available from Dia 6 to Dia 200mm in All Grades. Titanium SheetsWe have a wide range of Titanium Sheets available from Size: 0.5mm to 3mm Thick in All Grades. Titanium PlatesWe have a wide range of Titanium Plates available from Size: 4mm to 25mm Thick in All Grades.

United Stainless LLP we are Manufacturer, Exporter and Supplier of Titanium Alloy Sheets & Plates . We provide various wide range of Titanium Alloy Sheets & Plates in grades such as grade 1, grade 2, grade 5, grade 9. the components we have ,helps titanium to remain amongst other item are Easy establishment, Compact configuration, Durable completion, Abrasion resistance, Smooth surface and Perfect completion. we also take clients request as per their request in different countries.

• Brand Name: Neon

Titanium is a grayish chemical element, which is light, strong, lustrous, and corrosion-resistant transition metal. This highly functional element can be alloyed with iron, aluminum, vanadium, molybdenum and many other elements. Titanium Alloy is used to produce strong lightweight alloys for aerospace, military, industrial process, chemicals and petro-chemicals, desalination plants, pulp and various other applications. We also manufacture Titanium Alloys in form of fittings and fasteners as per client's requirements.Specifications and Grades Forms : Sheets, Plates, Strips, Flats, Pipes (Seamless & Welded), Wires, Wire Rods, Round Bars, Circle, Ring, Fasteners, Flanges, Orthopedic Implant etc. Grade : Grade 1, Grade 2, Grade 12, Grade 5, Grade 5 (6 AL - 4V), Grade 5 ELI Sizes Round Bar : 1mm - 100mm Sheets, Strips and Plates : 0.6mm - 30mm Wall Thickness : 0.6mm - 200mm

Titanium suppliers in India, Buy Ti material from titanium alloy manufacturers in India, Titanium Products at price in India.

We come forthwith only that Titanium Alloy, which have high tensile strength and high resistance. Our robust titanium alloy is used in making static and rotating gas turbine engine, aircraft and spacecraft components. We offer nominal price for that eminent Titanium Base Alloys. Some of our demanding titanium alloys are used in defense services.

Well-established name in the domain, you can count on us for presenting extensive array of Titanium Alloy. In order to deliver the best in class finished products, we make use of quality-tested raw material and modern work methods. Also, we make sure that the material is sourced from the reliable places only.

The company stands tall among the trusted Importers, Suppliers and Exporters of Ferro Titanium Alloys from Maharashtra. The Ferro Titanium Alloys we make available are manufactured using advanced technology. Our Ferro Titanium Alloys are 100% pure and completely from all kinds of impurities. We are capable of delivering bulk orders of the Alloys within the promised time frame. Buyers can obtain the Alloys at competitive rates from us.

• Size: ½” to 18″

We export & Supply Titanium Alloy Flanges ,These products are made of superior quality titanium that ensures their high strength and sturdy construction. Our clients have acknowledged these products for their durable nature with very less wear & tear. These products are installed in different machines in order to ascertain their effective operation. the leading Exporter & Supplier of Titanium Alloy Flanges in India. We Provide different grade Titanium-flanges like Titanium-Gr 2 Flanges & Titanium Grade 5 flanges. This grade flanges are 40% lighter than steel due to low density but it is stronger than steel.

We are a recognized exporter and supplier of Titanium Alloy based in Mumbai, Maharashtra. We offer different grades of this product in the form of seamless pipes, welded pipes, seamless tubes, welded tube, bar, wire, sheet, plate, forgings, pipe and fittings and flanges. These products that we offer are much in demand because of their excellent quality. Our prices of this product are the most reasonable in the market. Features : Titanium Grade 1-4 is pure Titanium, the other grades are alloys. Pure Titanium is used due to its high corrosion resistance, the alloys because of the extremely high strength to weight ratio. Grade 1. Pure Titanium, relatively low strength and high ductility. Grade 2. The pure titanium most used. The best combination of strength, ductility and weldability. Grade 3. High strength Titanium, used for Matrix-plates in shell and tube heat exchangers. Grade 5. The most manufactured titanium alloy. Exceedingly high strength. High heat resistance. Grade 7. Superior corrosion resistance in reducing and oxidizing environments. Grade 9. Very high strength and corrosion resistance.. Grade 12. Better heat resistance than pure Titanium. Applications as for Grade 7 and Grade 11. Grade 23. Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for surgical implant Applications.   In what forms is Titanium Available at Om Steel ? Seamless Pipe Welded Pipe Seamless Tube Welded Tube Bar Wire Sheet Plate Forgings Pipe Fittings & Flanges   Details : Titanium Grade 1 : UNS R50250; ASTM Grade 1, CP titanium, C.P. titanium alloy Titanium Grade 2 : ASTM Grade 2; UNS R50400, CP titanium, C.P. titanium alloy Titanium Grade 3 : ASTM Grade 3; UNS R50550, CP titanium, C.P. titanium alloy Titanium Grade 4 : ASTM Grade 4: UNS R50700, CP titanium, C.P. titanium alloy Titanium Grade 7 : ASTM Grade 7; UNS R52400, CP titanium, C.P. titanium alloy Titanium Grade 9 : Ti3Al2.5V, UNS R56320; ASTM Grade 9; Half 6-4; Tubing Alloy TITANIUM Ti-5Al-2.5Sn : Titanium Ti-5Al-2.5Sn , UNS R54520; Ti-5-2.5 Titanium Ti-6Al-2Sn-4Zr-2Mo (Ti-6-2-4-2) : Ti6Al2Sn4Zr2Mo, Ti-6242; Ti-6-2-4-2; UNS R54620 Titanium Ti-6Al-4V (Grade 5) : Ti-6-4; UNS R56400; ASTM Grade 5 titanium; UNS R56401 (ELI); Ti6Al4V, bio materials, bio medical implants, bio compatibility Titanium Ti-6Al-6V-2Sn (Ti-6-6-2) Ti-662; Ti-6-6-2; UNS R5662

• Material: Titanium
• Color: Silver
• Application: Oil & Gas Industry, Automobile Industry, Construction, Defence, Industrial, Titanium Alloy Plate
• Length: Different
• Grade: Grade 5
• Feature: Accurate Size, Fine Finish, Rust Proof
• Pattern: Plain
• Width (mm): 1-100mm, 100-500mm, 1000-1500mm, 500-1000mm
• Type: Titanium Alloy
• Thickness: 0.5mm-1mm, 10-12mm, 1mm-2mm, 3mm-5mm, 4-5mm, 5-6mm, 6-8mm, 8-10mm, more than 10mm to any.
• Chemical Composition: Ti6Al4V
• Warranty: Lifetime
• Country of Origin: Other than India

We provide various products in Titanium Alloys like Titanium Alloys Pipes,Titanium Alloys Tubing,Titanium Alloys Butt Weld Fittings, Titanium Alloys Flanges, Titanium Alloys Plates in India,Duplex Steel UNS S31803 AISI 2205,UNS S32205 AISI 2205 UR45N Duplex Steel,Titanium Alloys Seamless Pipes, Titanium Alloys Welded Pipes, Titanium Alloys Flanges WN & Blind, Titanium Alloys Round Bar Being a quality driven organization, we are exhibiting our customers an unmatched and unparalleled cluster of Titanium Alloy Suppliers . Titanium Alloy Suppliers are acknowledged among our customers inferable from their components like sturdiness, erosion safe surface and high rigidity. Titanium Alloy Suppliers is effectively accessible as it is bounteous in nature.Titanium Alloys is 40% Lighter than Steel because of its low thickness. Titanium Alloys has Good quality, Excellent erosion resistance and High dissolving point.

Great Steel & Metals offers a wide ranging scope of Titanium Bars, Rods and wires for all our customers spread globally. Our customers make use of the scope of titanium bars known for the general to impervious consumption, push and setting consumption breaking, hole erosion etc. The metals containing blend of titanium and the substance of other components are known as Titanium Alloys. High strength and elasticity are present in such combinations of Titanium. They have phenomenal erosion resistance, are light in weight and have the capacity with which they can withstand persuasive temperatures. There are worthy mechanical properties in the alloys that are utilized for the dental and orthopedic inserts. The titanium is alloyed with little measures of vanadium and aluminum for most of the applications as this mix has strong dissolvability that has the capability to shift drastically with temperature that permits it to experience precipitation brisk.

• Length: 1000 mm to 6000 mm, or cut to size
• Diameter: 3.0 mm to 250 mm (tolerance h7 to h13)

Titanium alloy, Special alloy for titanium rod and titanium bar: Ti-Ni (memory alloy) Ti-Nb (superconducting and medical alloy) Ti-13Nb-13Zr (medical alloy) Ti-6Al-7Nb (medical alloy) Other titanium grade and titanium alloy are available by request

• Thickness: 0.6mm - 200mm
• Size: Round Bar : 1mm - 100mm
• Finish: Bright Finish, Black Finish, Black Forge Finish, Annealed Finish

Titanium is a grayish chemical element, which is light, strong, lustrous, and corrosion-resistant transition metal. This highly functional element can be alloyed with iron, aluminum, vanadium, molybdenum and many other elements. Titanium Alloy is used used to produce strong lightweight alloys for aerospace, military, industrial process, chemicals and petro-chemicals, desalination plants, pulp and various other applications. We also manufacture Titanium fittings and fasteners as per client's requirements. The specification and grades are given in the table: Forms : Sheets, Plates, Strips, Flats, Pipes (Seamless & Welded), Wires, Wire Rods, Round Bars, Circle, Ring, Fasteners, Flanges, Orthopedic Implant etc.Grade : Grade 1, Grade 2, Grade 12, Grade 5, Grade 5 (6 AL - 4V), Grade 5 ELISheets, Strips and Plates : 0.6mm - 30mmWall Thickness : 0.6mm - 200mmFinish : Bright Finish, Black Finish, Black Forge Finish, Annealed Finish

Great Steel & Metals offers a wide ranging scope of Titanium Bars, Rods and wires for all our customers spread globally. Our customers make use of the scope of titanium bars known for the general to impervious consumption, push and setting consumption breaking, hole erosion etc. The metals containing blend of titanium and the substance of other components are known as Titanium Alloys. High strength and elasticity are present in such combinations of Titanium. They have phenomenal erosion resistance, are light in weight and have the capacity with which they can withstand persuasive temperatures. There are worthy mechanical properties in the alloys that are utilized for the dental and orthopedic inserts. The titanium is alloyed with little measures of vanadium and aluminum for most of the applications as this mix has strong dissolvability that has the capability to shift drastically with temperature that permits it to experience precipitation brisk.

Titanium combinations are metals that contain a blend of titanium and other substance components. Such combinations have high elasticity and strength (even at compelling temperatures). They are light in weight, have phenomenal erosion resistance and the capacity to withstand compelling temperatures. Be that as it may, the high cost of both crude materials and preparing breaking point their utilization to military applications, airplane, rocket, restorative gadgets, exceedingly focused on segments, for example, interfacing bars on costly games autos and some premium games gear and buyer hardware.

• Material: TITANIUM GR2,GR5
• Color: SILVER
• Shape: Round
• Brand Name: IMPORTED
• Material Grade: TITANIUM GR2,GR5
• Size: UPTO 10"
• Usage/Application: AERO SPACE
• Diameter: UPTO 10"
• Finishing: BRIGHT SMOOTH

• Brand Name: HARSH STEEL

We are offering titanium grade 1. Ti grade 1 is the softest titanium with the highest ductility, good cold formability which gives ti grade 1 an excellent resistance from mild to high oxidization. Harsh steel, procures, supply & exports wide range of titanium & titanium alloys in forms of ti grade 1 wire, ti grade 1 round bar, ti grade 1 forged bar , ti grade 1 hex bar, ti grade 1 flat bar, ti grade 1 tube, ti grade 1 seamless pipe, ti grade 1 welded erw pipe, ti grade 1 sheet , ti grade 1 flanges, ti grade 1 fasteners, ti grade 1 socket weld fittings, ti grade 1 ferrule fittings, ti grade 1 butt weld fittings like cap , elbow , tee , reducer according to asme, ams, din, gb etc.

Gun Metal Products, Phosphorus Products, Stainless Steel Products

Pipes, Tubes, Coil, Sheets, Plates, Flanges, Butweld Fittings, Forged Fittings, Valves, Ferrule Fittings Nath Metal Industries are Supplier, Stockiest, Importer and Exporter of Special Alloy Products Hastelloy, NIckel Alloy, Monel, Inconel, Copper Alloy, Titanium Alloy, SMO 254, Duplex, Super Duplex, High Tensile, Tantalum, Stainless Steel, Carbon Steel, Alloy Steel, Abrasion Resistant Steel, Hadfield Manganese Steel, Corten Steel, Quenched & Tempered Steel ,Armour Steel etc in Forms of Pipes , Tubes, Plates, Sheets, Coil, Flanges, Round Bars, Fittings, Valves, Fasteners etc. We also deal in IBR Products.

Titanium is a lustrous, white metal. It has a low density, good strength, is easily fabricated, and has excellent corrosion resistance. It is ductile only when it is free of oxygen. Titanium is as strong as steel, but it is lighter. The metal is heavier than aluminum, but it is twice as strong.

Shree kalpataru metal co. Is a highly acclaimed manufacturer and supplier of high quality titanium alloys from india.

• Range: 8mm - 200mm

We provide Titanium Alloy Gr2 Round Bar as per the requirements of our customers and deliver quality products on time. Titanium Alloy Gr2 Round Bar comes in sizes from 8mm to 300mm.Titanium Alloy Gr2 Round Bars are available in different types such as Titanium Alloy Gr2 Round Bars (ASTM B ASME SB 166), Titanium Alloy Gr2 Round Bars & Bars Exporter in Mumbai, India, Grade 2 Titanium Alloy Round Bars, Titanium Alloy UNS R50400 Round Bars & Bars, Titanium Alloy Gr2 Bright Bar & Rods, Titanium Alloy DIN 3.7035 Round Bars & Rods, Titanium Alloy UNS R50400 Bars, Titanium Alloy Gr2 Polish Bars, Titanium Alloy Gr2 Black Bar, Titanium Alloy Gr2 Forged Round Bar Exporters Titanium Grade 2 Bright bars is perceived moderately over the world as a low-weight and high-quality material, which has pretty much 60 percent of steel in it. Notwithstanding, it has other outstandingly appealing properties additionally, for example, most amazingly high corrosion resistance, and top notch electrical conductivity.

• SIZE: 12 mm - 100 mm

Titanium Alloys is effectively accessible as it is bounteous in nature.Titanium Alloys is 40% Lighter than Steel because of its low thickness. Titanium Alloys has Good quality, Excellent erosion resistance and High dissolving point. we are exhibiting our customers an unmatched and unparalleled cluster of Titanium Alloys. Titanium Alloys are acknowledged among our customers inferable from their components like sturdiness, erosion safe surface and high rigidity.

Stainless Steel, Carbon Steel, Alloy Steel, Stainless Steel Alloys

monel rod, Fastener, titanium product, Nickel Products

Iron,S.S,174-PH,Monel,Inconel,Alloy,Brass,Titanium (rod,square,hex,circle,rectangle) in my workshop i m forging Iron,S.S,174-PH,Monel,Inconel,Alloy,Brass,Titanium metal to rod,square,hex,circle,rectangle