Triton Process Automation Pvt. Ltd. Ghatkopar, Mumbai, Maharashtra

Honeywell Y-type strainer is widely used in water application and is used for protecting valve and other equipments from scrap and impurities in the system.   Features:     Ductile iron body with epoxy coating   Stainless steel filter screen   Specifications:     Nominal Pressure Rating : PN16 , PN10   Size Range: DN50 to DN600   Medium: Chilled and hot water   50% glycol solution   Medium temperature : -10°C to 120 °C   End Connection : Flanged ( ISO7005-2)  

Vortex flow measurement technology is used to measure flow of utilities like compressed air, steam & even fuel oil. Vortex meters are reliable & most accurate flow measurement technology available & widely accepted across the industries. We are associated with Omicron U.S.to bring this flow measurement technology for various flow measurement application. Vortex flow meters working principle is von Karman’s effect principle which is based upon viscosity & velocity of fluid media. Vortex flow meters are used for domestic as well as industrial flow application wherever high accuracy is required.   Von Karman principle is stated as below.   “When a media moves in a direction & hits directly to a bluff body, vortices are generated. The frequency of vortices is directly proportional to the flow rate of media.”This frequency of vortices is then picked up by a coil pick-up placed after shredded rod or bluff body, when vortices hit the pickup.   Benefits & Features:   No moving parts High Accuracy as high as ± 0.5 % Flow range 10:1 Low pressure drop Pressure & temperature compensation available as optional.     We have both integral type & remote type sensors option available as far as mounting is considered. The sensor selection is generally depend upon the application & site conditions. We recommend you to take our expert advice before making selection of appropriate sensor.   Technical Specification:   Accuracy: ± 0.5% Damping Time 0.2~100s selectable Analog Output: 0-10 VDC/4~20mA. Protection Class: For electronic box IP65 (outdoor) or IP 67 (optional) Lining Material: Rubber, PTFE, Polyurethane, PFA Sensor Material: AISI Stainless steel Measuring Range 10:1, flow rate ≤12m/s (39ft/s) Power Supply: 24 VAC Structure Type: Integral type, remote type, submersible type

Variable Air Volume (VAV) Boxes are required to control air supply as per the requirement in an air distribution network of air flow in a particular zone. VAV Boxes are used very frequently in office space, commercial towers, conference rooms & control area to control temperature & try to achieve a particular set point given to its thermostat.VAV Boxes by varying airflow can control various parameters like temperature, CO2 level, positive differential pressure, depending upon its application. It also attains substantial energy saving by blocking access air into the duct & hence in-turn low rpms of AHU fans, unlike constant air volume system which is not capable of achieving high energy efficiency.Triton is associated with Honeywell Automation to bring out the best quality Variable Air Volume system to its customers. WE became proud ‘exclusive channel partners for VAV system’ of Honeywell Automation for complete country in year 2014.   We provide Pressure Independent type Variable air volume boxes, factory fitted with a microprocessor DDC controller, damper, damper actuator, cross flow velocity sensor with differential pressure transmitter, thermostat and in-built step down transformer. VAV boxes are calibrated in factory & undergo Honeywell’s stringent quality check tests before being shipped out of factory.We can also customize VAV boxes as per the requirement of customer like, single skinned, double skinned, by-pass, multi leaf, with heating element etc. Zone Temperature Application This is the most common type of application, required to control temperature by varying air flow. The most critical of them were heating & cooling application, where air temperature changes as per the weather condition, & hence VAV operation also reversed to achieve a set point. Our technical team has mastered these applications to ensure proper operation of the system.   Fresh Air/ Ventilation (Demand Control Ventilation) Application In Demand Control Ventilation, a VAV operates to limit & measure the air flow required to maintain a CO2 differential level in a particular zone. A high CO2 level can cause lower work efficiency of the work force. Also access fresh air intake in an AHU can decrease its energy efficiency. In order to control an optimum level of CO2 differential level, a Variable Air Volume Box finds its application, it measures CO2 level & modulate accordingly to maintain a CO2 level inside a work space. We have commissioned systems having such requirement across the country successfully. Our controllers are fully compatible to maintain VOC level, rH level etc. to provide a controlled environment.   Differential Pressure Application We have also come across differential pressure application, where a VAV is placed in return duct, & it allows maintaining a higher pressure in the controlled area. This application is generally used in controlled environment like clean room, drug formulation chambers, storage cabins, Server rooms etc. Applying VAV system, an efficient dust free system can be provided by maintaining a positive pressure inside the zone.We have undertaken these critical application & successfully commissioned them.   VAV Box CFM Range: We offer an extensive range of CFMs from 62 cfm to 8000 cfm

Ultrasonic flow measurement is among the best & most accurate technology available these days. It is widely accepted & prominently used across the industries due to its non-cohesive nature with the flow media. It is also non-effected in high magnetic field zones, where other technologies like electromagnetic & Boltzmann’s turbine technologies might have a challenge.Our Shenitech ultrasonic flow meters work on Transit time principle which ensures high accuracy. Our ultrasonic flow meters  are   used  not  only  for  domestic water application but also in dirty water having high TDS, in Sewerage treatment & effluent treatment application.   Transit time principle is annotated as below.   “It is the time difference taken by two UH frequency pulses to reach the diametrically opposite ends of the pipe, which is related to the velocity of the fluid media inside pipe in direct proportion”Suppose ‘T1’ is the time taken by pulse to travel downstream to the flow of media & ‘T2’ is the time take by the pulse to travel upstream of the flow media moving unidirectional with velocity ‘v’ , then time difference ‘δT’ is related to velocity as   Benefits & Features:   Low maintenance as no moving parts High Accuracy as high as ± 1% OIML R49 standard. CE Approval Low pressure drop Tamper Proof Design Low Cost Over long run We have all types of sensors option available as far as mounting is considered. The sensor selection is generally depend upon the application & site conditions. We recommend to take our expert advice before making selection of appropriate sensor.

The PRV valve protects domestic, commercial and industrial applications against excessive water supply pressure. It reduces both water consumption and noise from water hammer, while minimising over pressure damage. The set outlet pressure can be maintained even when there are wide inlet pressure fluctuations. A drop tight seal means outlet water pressure will not increase when there is no flow. It has been awarded the Waterwise Marque.   Features:   Outlet pressure set by turning the adjustment knob Set pressure directly indicated on the set point scale Adjustment spring not in contact with wholesome water Valve insert is of high quality synthetic material and can be fully exchanged Integral fine filter (160 microns) Available without fittings Light weight Reliable and proven Drop tight max. 16 bar with clear filter bowl or max. 25 bar with brass filter bowl inlet pressure 1.5 - 6 bar outlet pressure Available with pressure gauge   Options:   1/2" and 3/4" Female BSP connections 15mm and 22mm connections  

Flow measurement of fluids like water, process chemicals or mixture of chemicals within a running system in any process industry is a very critical and a monotonous task, & needs to be checked time to time for proper functioning of a system.Water flow balancing in a HVAC system is very important, in order to get proper cooling in a particular space.Also, for an auditor who performs water audits very frequently a handy portable system is required, which is easy to carry around & can record data.For every requirement listed above, Triton brings a single solution, which not only can measure flow of more than 300 different process liquids including water, glycol, glycerol, benzene, kerosene & other organic compounds, but also very handy with less than 750 gm. of weight.Shenitech’s Portable Ultrasonic flow meter easily gets clamped on the pipe and through minute adjustments, one can get readings with accuracy as good as ±1% of m.v.. The meter can be applied on any pipe material by just selecting requisite pipe material in a menu.Portable ultrasonic flow meter is easy to carry, use and have high repeatability of 0.5%. Just clamp it to the line whose flow is to be measured and get the reading on the meter display.Ultrasonic flow meter works on “Transit time Principle” and have high precision from line size 3/4 “ to 240” by selecting from variety of sensors available for measurement.   Benefits & Features :   High accuracy, ±1% of velocity. NIST Standard Non-intrusive, clamp-on installation, easy and fast. No pipe disturbance, no pressure drop, no moving parts Light weight (1.2lbs/538g for the handset). Compact design. Bi-directional, wide range, [-52ft/s ~ 52ft/s (-16m/s ~ 16m/s)] Wide pipe size range, [3/4" ~ 240"(DN20 ~ DN6,000 mm)] Suitable for all commonly used pipe materials and liquids. Rechargeable battery for 10 hours of operation. Built-in data logger. Totalizer for net, positive and negative flow. Self-explanatory user interface. Very easy to operate. Optional Stuf Manager TM PC software for data download and real-time data display. Signal quality tracking and self-adjusting capabilities automatically match transducer to pipe material.

Flow measurement of fluids like water, process chemicals or mixture of chemicals within a running system in any process industry is a very critical and a monotonous task, & needs to be checked time to time for proper functioning of a system. Water flow balancing in a HVAC system is very important, in order to get proper cooling in a particular space. Also, for an auditor who performs water audits very frequently a handy portable system is required, which is easy to carry around & can record data.

The Dual Plate Check Valves is designed for Chilled & Hot Water for purpose non-return valve that is stronger, lighter in weight and smaller in size as compared to other Check valve.   Features:   Wide Size range (DN50…DN300) Cast iron Body Lapped Ductile Iron disc Wafer type and flange type Connection   Specifications:   Sizes: DN50…DN300 Nominal pressure: PN16 Medium Temperature: -10℃ ~ +110℃ Maximum Body Material IS: 210, FG 220 CI Shaft Material: ASTM A276,GR SS 410 Plate Material: Lapped Ductile Iron Disc Leakage Rate: Low leakage at 0.5Kg/cm2 Medium Type: Water Flange standard: ISO7005-1 (GB/T 9113) Shell Test pressure: 24bar Seal Test pressure: 17bar

The Manual Butterfly Valves is designed for Chilled & Hot Water to be operated by Hand lever or Gear Box   Features:   Wide Size range (DN40…DN900) Operated by Lever or Gear Box. 90 deg opening/closing operation. Cast iron Body with powder coating. Epoxy Coated Ductile Iron disc. Wafer type Connection   Specifications:   Sizes: DN40…DN900 Nominal pressure: PN16, PN25 Medium Temperature: -10℃ ~ +110℃ Maximum Body Material: IS: 210, FG 220 CI Stem Material: ASTM A276, GR SS 410 Disc Material: Epoxy Coated Ductile Iron Disc Lever: CRCA SHEET Leakage Rate: No visible leakage Medium Type: Water Flange standard: IS 1538 Shell Test pressure: 24bar Seal Test pressure: 17bar

Features:   Forged Brass Body Chrome Plated Ball Standard Port and Full Port Design   Specifications:   Valve sizes : 1/2 inch to 3 inch BSP Internal Threads Nominal pressure : PN16, PN25  

General:   The Balancing Valves is designed for double regulating, control and shut off valve with built-in pressure drop measuring facility.We have a wide range from 15mm to 300mm. It is divided in two parts, 15mm to 40mm and 50mm to 300mm as below, For 15mm to 40mm,   Application:   The hydronic balance is a significant requirement for the efficient operation of a hydronic heating or cooling installation.  In  an unbalanced   system   under   or   over provision of hot water to individual radiators or circuits can occur. Apart from the correct selection of radiator valves, regulation of individual circuits is also necessary and in some cases, such as in DIN 18 380, VOB part C, required by national standards.The Valve is a variable orifice double-regulating balancing valve for the return with additional functions shutoff, draining and filling.It can be upgraded to an automatic balancing valve - even after the system has been taken into commission and under system pressure.   Features:   Quick and easy measuring with SafeConTM measuring connections Dimensions DN15 to DN40 can be retrofitted with a Kombi-Diaphragm Unit High accuracy of pre-setting because of individual adjustment Robust valve body made of corrosion resistant red bronze Available in sizes up to DN80 Visible pre-setting dial with concealed pre-setting wheel Maintenance free spindle with double O-ring sealing’s PTFE-seat sealing   Specifications:   Sizes DN50…DN300 Nominal pressure PN16 Medium Temperature -10 ~ +110 Maximum Body Material IS:210, FG 220 CI Stem Material ASTM A276,GR SS 410 Disc Material Stainless steel Disc Hand Wheel Cast Iron Leakage Rate No visible leakage Medium Type Water Flange standard IS1538 Shell Test pressure 24bar Seal Test pressure 17bar  

BTU meters are used on chiller lines to measure the energy consumed by the chillers in the cooling process. Our BTU meters are constantly used in projects and recommended by various consultants and BMS providers across the country. Shenitech ST-280T BTU meters are based on Ultrasonic Transit Time Technology. These BTU meters assure Class-2 accuracy and have a tamper-proof model as per the energy norms in various countries.These BTU meters have an in-built battery i.e. no hassles of power supply on the site. Battery back-up lasts for 6 years. Since there is no moving part in the sensor assembly these meters are maintenance free and hence has high reliability. Unmatched Advatages of Shenitech BTU meters   We have an entire range of ultrasonic flowmeter from 15mm to Line sizes more than 700mm and customized for higher line sizes as per your requirements. Our meters can detect a very high capacity of flow. Because of the high flow capacity, we need a lower size meter for a certain flow rate.   - For example: 100mm line size might require our 65mm flow meter.   This enables cost saving and also proper sizing of the meter. All our meters are wet calibrated where the temperature and flow sensor are calibrated together and we give a calibration certificate with each and every meter. All our meters have an inbuilt battery backup – guaranteed for a minimum of 6 years.Hence no hassels of giving rthe power supply and spending unnecessary cabling and cable laying cost. No reflector used for detection of flow. This ensure that meters are very robust and don’t have any problems even after years of operation. This ensures efficiency of meter and maintenance free years of operation. Single point source for meters, hardware for interconnectivity (M-Bus) and software for billing and meter reading. This ensures zero dependence on a third party. Also we ensure that the system is up and running at all times. Tamper proof design---ensures no tampering in the final bill 2 years international warranty on all the products  

Electromagnetic flow metering is one of the oldest & most widely used across the industries. Magnetic flow meters are reliable & cost effective water flow measurement technology available. We are proud to be associated with Shenitech, LLC to bring this flow measurement technology for water flow measurement application. These flow meters work on Faraday’s Law principle which depends on the conductivity of media. Our magnetic flow meters are used for domestic as well as industrial water flow application having high TDS, in Sewerage treatment & effluent treatment application.   Faraday’s Law principle is annotated as below.   “When a charged media moves in a direction which is perpendicular to the direction of magnetic field an electromagnetic flux is generated which is perpendicular to the direction of both motion of charged media & magnetic field & directly proportional to the mean velocity of charge particle & magnetic field.”   Benefits & Features:   No moving parts Can operate for conductivity as low as 5 µS/cm High Accuracy as high as ± 1% & large flow range 1200:1 CE Approved A large selection of liner like PTFE, Neoprene, PFA etc. Electrode material selection Low pressure drop   We have both integral type & remote type sensors option available as far as mounting is considered. The sensor selection is generally depend upon the application & site conditions. We recommend you to take our expert advice before making selection of appropriate sensor.   Technical Specification:   Accuracy: ± 0.5% Damping Time 0.2~100s selectable Analog Output: Bi-directional, isolated 0~10mA/4~20mA. Protection Class: For electronic box IP65 (outdoor) or IP 67 (optional) Lining Material: Rubber, PTFE, Polyurethane, PFA Electrode Type: General type, scraper type or replaceable type Electrode Material: 316L SS, Hastelloy B, Hastelloy C, Titanium, Tantalum Sensor Material: Measuring tube Stainless steel Medium Temperature: Integral type -10°C~+80°C (14°F~176°F)                                            Remote type -10°C~+150°C (14°F~302°F) Conductivity: ≥ 5us/cm Measuring Range 1200:1, flow rate ≤12m/s (39ft/s) Power Supply Structure Type Integral type, remote type, submersible type

The STUF 300R ultrasonic thermal energy meter provides abundant capabilities for accurate thermal energy measurement of a liquid-based thermal energy production transferring system. It is the 3rd generation energy meter from Shenitech. Compared to its predecessors, the 3rd generation offers better performance and a richer feature set, all at a lower price.

Application:   The Air Vent is a reliable automatic venting device and is suitable for venting of air or gas from heating systems or heat process installations.   Features:   With the shutoff valve fitted, cleaning or re-placement of the seal and inner components can be carried out without draining the system.   Range of Application:   Hot water heating systems, radiators, wall and ceiling-mounted air heaters, air collection vessels, pipework circuits, boilers and air separators Not suitable for mineral oil or liquids with mineral-oil-based additives.   Specifications:   Operating temperature max. 110°C (230°F) Operating pressure max. 10 bar (145 P.S.I.) Connection sizes R 3/8" and R 1/2"   Design:   The automatic air vent comprises: Housing Lid Float Valve seat seals   Design:   Brass housing Brass lid High grade, heat-resistant synthetic material float Heat-resistant elastomer seal components

We are dealing in ahu valves VBNVBF Control ball valves control hot and chilled water in HVAC systems to provide two-position, floating, or modulating functions. Order them with or without factory-mounted non-spring return or spring return direct-coupled actuators. Flanged control ball valve offering available (VBF) Accurate flow control Simplified actuator selection with a large range of Cvs Built for safety and endurance with a blowout-proof stem to withstand high pressure and optional NEMA 3R enclosure for weatherproofing Field replaceable stem allows valve to be serviced and replaced on the pipe Threaded 2-Way models up to 3" and 3-Way models up to 2-12" Parabolic flow insert constructed into the ball provides high quality seals and precise control Multi-actuator mounting bracket allows the same bracket to be utilized on all valves Removable manual operating handle to control valve during installation or in an event of power failure