Gate Valves Dealers in Andheri East, Mumbai (30 products available)

Gate Valves are provided with properly machined and lapped backseat to ensure re-packing under pressure while fully open. Availability of Solid Wedge, Flexible Wedge, Split Wedge and Parallel Wedge designs offer maximum option to clients for suitable selection.Gaskets and Gland packing material are selected to suit service conditions like temperature, corrosion, erosion, pressure, vacuum and other applications.

• STEP 1: Select the hydraulic cylinder that best suits the application.
• STEP 2: Select the series of hydraulic pump with adequate oil output and reservoir capacity to power cylinder.
• STEP 3: Select pump within series with the valve option that best matches cylinder, pump and application.  

CONSIDERATIONS: Will the valve be used with single or double-acting cylinder? Will the valve be mounted on the pump, away from the pump or directly into the hydraulic lines? Will the valve be manually operated or is remote control preferred? Is independent control of multiple cylinders, or hydraulic tools preferred? What directional control and pressure control valve functions are needed for the application?   Basic valve types include manually operated, air or solenoid operated and pilot operated. Special application valves for pre-stressing and post-tensioning are also offered. IN-LINE HYDRAULIC VALVES Load Lowering Valve - Provides precision metering for controlled return of the cylinder pistion.   Sequence Valve - Used when a cylinder in a multiple cylinder application must advance before any other.   Pressure Reducing Valve - Permits independent pressure control to two or more clamping systems operated by a single power source.   Shut-off Valve - For fine metering of hydraulic oil. Several may be used to control multiple single-acting cylinders.   Check Valve - Permits flow of hydraulic oil in one direction only.   Pressure Relief Valve - Used at remote location in a hydraulic circuit where maximum pressure requirements are less than the setting of the basic overload valve in the pump. Protects a hydraulic system against over pressurization.   Metering Valve - Restricts surges by restricting flow to a certain level; when flow subsides, valve reopens automatically. For systems using large cylinders or extended lengths of hose.   Pressure Regulator Valve - Permits external adjustment of operating pressures at various values below the internal relief valve setting of the pump.

• Design :  
• API 600 / API 6D / API 603 / BS 1414:  
•  :  
• Face to Face:  
• ASME B 16.10 / API 6D:  
•  :  
• Flanges:  
• ASME B 16.5 /MSS SP 44 / ASME B 16.47:  
•  :  
• Butt welding:  
• ASME B 16.25:  
•  :  
• Testing:  
• API 598 / API 6D: Material
•  : ASTM Specifications Carbon Steel,Alloy Steel,Low Temperature carbon Steel, Stainless Steel, Duplex Stainless Steel,Super Duplex Stainless Steel,any other special material.
•  :  
•  : Trims
•  : Varieties of combinations
•  :  
•  : Operator
•  : Handwheel, Gear, Chain Wheel Pulley, Electrical Motor and Pneumatic Actuator.
•  :  
•  : Note
•  : • Oval Flat Body Bonnet Joints for 150 Ibs. • Male Female Body Bonnet Joints for ratings ≥300    Ibs • RTJ Joints on request. • RTJ Body Bonnet • Joints for ratings ≥ 1500 Ibs (standard)
•  :  
•  : Optional
•  : Electrical & Geared Drive, Bypass arrangement, Floor stand

We Bring to Customers the G.m. Gate Valve 06. the Feature of the G.m. Gate Valve 06 is that the Hat Opens By Lifting a Round Gate. An Unrestrained Flow of the Liquid is Hence Ensured By These Gate Valves, Which are Regulated as per the Requirement of the Customer. to Provide Efficient Performance, These Gate Valves are Manufactured Under Strict Quality Standards. We also Customize Our Gate Valve as per the Customer’s Needs. features highest Qualitycustomizedsuperior Designtime Lasting applications piping Requirements Mechanical Applications Control Liquid Flowpower Plants

• Brand: ksb
• Automation Grade: Manual
• Is It ISO Certified: ISO Certified
• I deal in: New Only
• Rust Resistant: Yes
• Features: Rugged construction, Hassle-free installation

• Type: Pressure Control Valves
• Material: Metal
• Application: Oil Fitting, Water Fitting
• Automatic Grade: Manual
• Number Of Way: 2way
• Pressure: High Pressure
• Feature: Durable, Easy Maintenance.

We are the main supplier of this product.

Material : ASTM Specifications Carbon Steel, Alloy Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, any other special material,Trims ,Varieties of combinations

GATE VALVES : WESMEC Brand Gate valves offers a comprehensive range of Gate Valves. For the past decades our customers worldwide have trusted us to provide them with consistent and reliable valve products in their most severe and critical service. Gate Valve are designed to operate fully open or closed. Because they operate slowly they prevent fluid hammer which is detrimental to piping systems. There is very little pressure loss through gate valve. In the fully closed position, gate valves provide a positive seal under pressure.   FEATURES: • Available in a variety of end connections. • Available in Stainless Steel Spiral wound and Asbestos Graphite gasket for more safety. • Various types of Coating used to avoid corrosion. • Hydraulic Test Pressure: (BODY) up to 210 Kg/Cm². • Hydraulic Test Pressure: (SEAT) up to 150 Kg/Cm². • Pneumatic Test Pressure: up to 10 Kg/Cm². • Non Destructive Test (NDT) available on request.   Standards Followed: • ASME B16.34/ B16.11/B1.20.1, BS 1873, API 602, ISO 15761, CE Marking. • Marking and Identification of Valves as per MSS-SP-25.   • Application: It is primarily used for on-off conditions or for isolation.

Piston Valve, Plug Valve, Balancing Valve

Slab Type Gate Valve, Mini Ball Valve, Testing Services

We are the eminent Gate Valves Manufacturer and Exporter in India which is basically a motor valve. It is very useful and made with advanced technology. Features: Optimum quality Low maintenance required Economic prices

slide gate valve, Gun Metal Gate Valve, Metal Seated Gate Valve

    VALTECH” compact design & high pressure, Forged Steel Gate Valves are designed and manufactured with reference to standard API 602 for small Pipelines up to 50NB. They are available in Threaded as well as Socket Weld ends. Hard Faced Trim material ensures perfect Sealing and longer life. Lapped Back Seat is provided to ensure re-packing/replacing of Gland Packing in stream, when the Valve is in full open condition which ensures maximum safety, convenience and economy. If required, Valves can be offered under any THIRD PARTY INSPECTION. “VALTECH” Gate Valves are available in various materials like Forged Carbon Steel conforming to ASTM-A-105, Forged Alloy Steel like ASTM-A-182-F11, F22 and Forged Stainless Steel like ASTM-A-182 F304, F304L, F316 and F-316L. Size range starts from 15 NB through 50NB and pressure rating up to ANSI 2500#.  

Cast Bellow Seal Gate Valve Flanged Ends manufactured by us come in varying technicalities and patterns. However all have equally vital utility and importance. Technical Data:Valve Designed to BS- 1414 Valve Tested to API- 598 / BS- 5146 Flanged Ends to ANSI-B-16.5 End to End as per ANSI-B-16.10 Accessories:Geared Actuators Electric Actuators Floor Columns By - Pass Piping Notes:Sizes above 250 has two piece bonnet Optional Stellited Wedge & Seat Inconel-625.

Ball Float Steam Trap, Glandless Piston Valve, Piston Valves

slide gate valve, gunning machine, paddle mixer machine, Plastering Machine

Cylinder Operated Knife Gate Valve, Vac Linear Actuator, Air Volume Booster

Non Rising Gate Valves

X-MAS TREES, GAS LIFT EQUIPMENT, SURFACE PRESSURE CONTROL EQUIPMENT

Carbon Steel Gate Valves, Reflux Valve

slide valves, Oil Lubricant, Y Strainer Valve, Foot Valve

PVC Gate Valves, New Square Box, Pvc Check Valves, PP Pipe Tee

Office Stationary, Globe Valves

Forged Bellows Sealed Gate Valves, Bellows sealed Cryogenic Valves

Butterfly Valves, Diaphragm Valves, Globe Valves, Safety Valves

Male Branch Tee, Direct Mounted Winflow 3 Way Valve Manifold

Bronze Gate Valves, Cast Steel Check Valves