Viscosity Baths Dealers in Mumbai (18 products available)

Our company has carved a niche in the market by providing high quality Viscosity Bath in the market. We provide two options in Viscosity Bath, namely- Viscosity Bath (Heating) and Viscosity Bath (Cooling). Our Viscosity Bath is highly appreciated for its smooth heating and cooling processes. This means that our Viscosity Bath has got excellent heating and refrigeration functions. Viscosity Bath [Heating] Viscosity temperature bath designed for accurate convenient & economical determination of viscosity of oil etc durable corrosion free stainless steel inner & outer made from G.I / M.S duly epoxy powder coated finish controlled by solid state digital temperature controller specially designed pump cum stirring assembly for high accuracy & uniformity perfectly sealed glass window at both the sides for see thru the test which is carried out while keeping the unit ON Optional Accessories Illumination by Fluorescent tubes for clear visibility of test P.I.D Based Controller Microprocessor controller As per G.M.P P.O.R Viscosity Bath [Cooling] Same as above with Refrigeration system of Hermetically Sealed compressor of EMERSON make or better than that of which will be placed below the working chamber without disturbing any kind of mechanism. Optional Accessories Illumination by Fluorescent tubes for clear visibility of test P.I.D Based Controller Microprocessor controller As per G.M.P P.O.R

We are a reliable Manufacturer, Exporter & Supplier of Viscosity Bath. The Viscosity Bath offered by us is used for highly stable viscosity bath temperatures. The Viscosity Bath comes with a digital measurement and display. We offer Viscosity Bath that is sturdy, durable, and efficient and offers reliable performance. The Viscosity Bath can e availed from us at competitive price.

• Application: Industrial
• Power Source: Electric
• Temp. Range: Above ambient to 99.9, 0 TO 99.9, -10 to 99.9 degrees Celsius 
• Accuracy: +0.1 to 0.5 Degrees Celsius
• Heaters: S. S. tubular heaters for maintaining of temp.
• Temp. control: Digital temp controller housing all the controls, switches with PT-100 sensor.
• Special care: A suitable K. V. A. Servo Controlled Voltage Stabilizer is recommended.

We manufacture and supply low temperature water bath. It has the following    Features:  Applications : Equipment specially designed for tests in the field of Medical, Agricultural, Bio-chemical, R & D & Q.C Laboratories & to suit the various IS standards. Construction : Double walled, Exterior of CRCA/GI Epoxy Powder coated & Inner chamber of AISI S.S 304, with PUF insulation, S. S. Lid on top. Circulation : Efficient motor of 1440 RPM top mounted is installed for stirring to get temp uniformity. Refrigeration System : Hermitically sealed compressor provides temp. for below ambient conditions, Double stage compressors with cascade system for Temp. -40ºC / -70ºC, Refrigerant CFC Free.  Option : Models available as per GMP/Complete S.S unit, Microprocessor based PID temp. control with printer interface, RS 232 CPC / RS 485 interface for multiple networking of controller.  Validation : Validation Protocols for IQ OQ PQ & DQ complete documentation with reports, Calibration & Test Certificates traceable to national & International Standards.  Safety Features : Safety thermostat for over shoot of temp., safety circuit to cut off the whole systems in case of malfunction. (Applicable to based models only) HRC fuses for compressors, heaters & mains, time delay circuit for safety of compressor.

• Brand: Vision Enterprises
• Power Source: Electric
• Temperature Range: 5 - 95 Degee C
• Material: Stainless Steel
• Usage/Application: Laboratory
• Frequency: 50 - 60 Hz
• Capacity: 4 & 6 Hole
• Digital Timer Range: 0 to 999 minutes

Temperature Range Above Ambient To 99.9 Degree C / 0 C To 99.9 Degree C/ -10 C To 99.9 Degree C  Accuracy + 0.1 Degree C TO 0.5 Degree C  Applications This equipment is specially designed for tests in the field of Medical / Agricultural / Bio-chemical / R & D & Q.C Laboratories & also suits various IS & A S T M Standards.  Construction Double walled, Exterior of CRCA / GI Non-contaminant Epoxy Powder coated & Inner chamber of AISI S.S 304, with PUF insulation, S.S Lid on top with provision for holding Viscometer Holders.  Circulations Efficient Motor of 1440 RPM Top Mounted is installed for stirring to get temp. uniformity.  Heaters S. S Tubular Heaters for maintaining of temp.  Refrigeration System Hermitically Sealed compressor provides temp. for below ambient conditions. Refrigerant CFC Free. g Temperature Control Solid state electronic Digital Temp. Control panels housing all the control switches with PT-100 Sensor. o Optional Models available as per GMP / Complete S.S unit, Strip Chart Recorder. Microprocessor based PID temp. Control with printer interface, RS 232 CPC / RS -485 interface for multing networking of controller. (Data Logger).  Validation Protocols Validation Protocols for IQ, OQ, PQ, DQ complete documentation with reports, Calibration & Test Certificates. r Safety Features Safety thermostats for over shooting of temp. safety circuit to cut off the whole system in case of malfunction (Applicable to microprocessor based models only) HRC fuses for compressor heaters & mains, time delay circuit for safety of compressor.

Double walled unit Outer GI powder coated Inner S.S. 304 Insulation provided to minimize heat loss S.S. lid on top with provision for holding Viscometers holders Hermetically Sealed CFC Free Emerson Compressor Temperature range: Above ambient to 99℃, -10℃ to 99 ℃ Application:  Equipment specially designed for tests in the field of medical Agricultural Bio-chemical R & D & Q. C. Laboratories

We offer viscosity bath. Double walled construction with inner cylindrical dewar flask and outer metal casing with toughened glass window provided on the front side. Low wattage fluorescent lamp at the rear illuminates the dewar flask. Bakelite cover plate with openings for 2 viscometers. A well balance cfc-free single cascade refrigeration system with eco-friendly refrigerant. Motorized stirrer provides adequate liquid transfer, both vertical and horizontally. Fully automatic microprocessor based pid controller having feather touch key board with pt-100 sensor. Liquid capacity 12 litres. Efficient stirring system.

• Application: Industrial
• Weight: 50-100 Kg
• Color: Grey, Light White
• Condition: New, Used
• Warranty: 1year, 2years, 5years
• Material: Stainless Steel
• Features: Good Quality, Durable

• Type: Standard Viscosity Bath
• Features: Clear glass tank makes monitoring simple, Quickly see selected and actual values on the large, backlit display, Accommodates six viscometer holders.

This bath is designed and developed under the strict supervision of our experienced professionals in accordance with the international quality standards. Our offered bath is thoroughly checked on various parameters to ensure zero-defect. This bath is widely used in national laboratories and pharmaceutical industries. Features: Intelligent signal sampling for accurate data measuring and parameter reading Accurate viscometer for improving experimental efficiency High precision digital display Ideal for controlling the temperature accuracy

Delivering excellence at a consistent level, we are a renowned Manufacturer, Supplier and Exporter of Laboratory Viscometer Bath. We make sure our product conforms to the highest standards of quality set by industry. Our priority is to equip it with immense quality, durability and robustness. We make it available as per exact demands of the customers. For our esteemed customers, we offer our perfect quality at economical rates. Features : Kinematic viscosity is of primary importance in the design and selection of a wide range of petroleum products. Calibrated capillary viscometers are used to measure flow under gravity or vacuum at precisely controlled temperatures. Rectangular model having double walled construction with toughened glass observation window Illumination from rear side provided. Oil immersion heater.

Maintains temperatures ±0.01°C between 20° and 100°C, meeting ASTM D 445 precision specification for kinematic viscosity

The Viscosity Bath is designed to simplify ASTM D 445; IS-1206 (Part III)-1978 kinematic viscosity testing. A top-mounted controller keypad permits quick entry of bath set point temperature while a sophisticated microprocessor controls the bath heating and stirring. To further enhance the input, the unit accommodates up to a maximum of six individual capillaries. The HVB features a measuring range of 5ºC to 230ºC and can be used with mineral oil, silicone oil, or water as the bath media. Bath temperature is displayed on a bright, easy-to-read digital display. In addition, the unit features a built-in over-temperature circuit and bath liquid level detector to automatically cut heater power in the event of thermal runaway or insufficient bath media.

Viscosity Bath, automatic autoclaves, Cooling Incubators, Oil Bath

Viscosity Bath, welding rod ovens, mother oven, Ultrasonic Bath