Washing Machine Components Dealers in Kurla, Mumbai (37 products available)

Designed for OEM applications, the Series A2 is economical and is equipped with high proof pressure capabilities for demanding applications. The A2 is available with either spade terminals or flying leads (submersible). Switches with spade terminals can be easily adjusted in the field.

• Media Type: Liquid
• Set point range: 2.5 to 75 psi
• Differential pressure: 1.0 to 67 psi
• Product type: Differential Pressure Switch
• Packaging type: Box

Our experties in Non Return Valve are having Bolted cover. These valves are used to prevent flow reversal in piping systems. They are suitable for service in vertical (flow up through valve only) piping runs. NRV Valves have low pressure drop and are best suited for moderate velocity applications. Correct sizing of NRV Valves is important. Either too low a line velocity or too high a velocity can damage valve internals and shorten valve life. NRV Valvesare suitable for all service media. Valves can also be supplied with counter weights and dash pot arrangement depending upon the condition and request.  

We are the leading manufacturers, exporters and supplier of this products.

• Media Type: Gas
• Material: Polycarbonate
• Adjustment Ranges: 0.3 - 60 Bar
• Over Pressures: Up to 80 - 300 Bar
• Max Working Pressures: 40 - 150 Bar

A] Air Compressor - Spare Parts 1] INGERSOLL-RAND :- [ IR- T-30 SS NL LPG Series ] 2] INGERSOLL-RAND :- [IR- ESV ESH IHE PHE LLE HSE XLE- Series ] 3] ELGI Compressors : - [ ELGI- SC TC THPC HV SS TS HP Series ] B] Other Air Compressors- Spare Parts 1] FOUJI :- [ FOUJI- MB SMB FI FID MBD ] 2] AIR-MARSHAL :- [AIR- MARSHAL- GC-305V , GC-294 , GC-7150 , GC-2595 ] 3] BOSS :- [ BOSS- MB SS SD ST TD TT HT HP ] 4] INDO-AIR :- [INDO-AIR- IA IAV ] 5] JK PNEUM :- [JK PNEUM- 25S , 50S , 75L , 100L , 75H , 150H ] 6] PARKEEN :- [ PARKEEN- SA SB SF SS SV TCA TCB TCI TCK ] 7] PNEUMECH :- [ PNEUMECH- PM PMF ] 8] ZEN AIR :- [ ZEN- 75H 150HH 75L 125L 25S 50S ] C] Screw Compressor - Spare Parts 1] Ingersoll-Rand ELGI Atlas - Copco CP Kirloskar Khosla Kaser Sullair Boge D] Refrigeration Chilling Compressor - Spare Parts 1] Accel Sabroe Carrier Voltas Grasso Kirloskar Stal Thermoking Trane Vilter All the Models Refrigeration Chilling Compressor Spare Parts E] Marine Compressor - Spare Parts 1] Sperre Tanabe Hatlapa Hamworthy All the Models Marine Compressor Spare Parts We do Export our product to Asian countries, Middle East, America, Canada, Europe etc. Countries. We aim to explore new avenues and conquer new frontiers.

We are bracketed among the trusted Suppliers of Industrial Pressure Transducers. The Pressure Transducers offered by us with reverse polarity protection on input and short circuit protection on output. Our range of Transducers is extensively used in refrigeration systems, automotive test stands, agricultural equipment, etc. Buyers can obtain it competitive rates from us.

• Voltage: 220-240 V
• Power: 10-20 W
• Frequency: 50-60 Hz

• Type: Housekeeping Trolley
• Capacity: 250
• Brand Name: Shree Products
• Number Of Wheels: 24
• Usage/Application: All Type
• Model: Unique24
• Loading Capacity: >250 kg
• Design Type: Four In One

• Features: Smooth edges, Precised dimensions, Fine finish
• Item Code: YukenDIN43650

We Are The Manufacturer And Supplier of Flow Switches Which Have the Following Types: Teleflo Target or Paddle And Plunger Type Flow Switches With Adjustable Settings. We offer our clients a comprehensive range of Flow Switches that is manufactured from finest quality raw material in compliance with set industry standards. Widely appreciated for its unmatched quality and performance, this range is offered in:. • Plunger-Flapper-Paddle-Diaphragm types • Magnetic Glandless switching • Micro switch, mercury and air break type • Flanged, screwed connections • Ideal for alarms, tank overflow and motor control • Special design for vertical / horizontal flow • Level switch - nine types for every application • Internal, external, side and top mounted •Micro switch - mercury, air break and air N\valves • Operating alarms • Motor control, level control with snap action contacts with NO/NC controls •Float operated Magnetic and Glandless

Sunraj Industries exports Copper Tubes for plumbing & refrigeration in full accordance with the appropriate product standards. Sunraj provide Copper Tubes with a complete range of outer diameter and wall thickness combinations, engineered to exact specifications to meet the highest standards of performance as required by the refrigeration and air conditioning industry. These copper tubes are available in a variety of tempers to suit the intended applications. These copper tubes can be supplied either in straight lengths or coiled as per the requirement. Sunraj products meet the highest industry standards and provide superior cleanliness for the contaminant-free transportation of refrigerants, oxygen and other gases.Copper Tube Applications: Air Conditioning & Refrigeration - Copper tube is widely used in air conditioning and refrigeration systems due to its high thermal conductivity which is about 8 times more than that from Aluminium tube. Domestic Water Service and Distribution - The combination of easy handling, forming and joining permits savings in installation time, material and overall costs. Long-term performance and reliability mean fewer callbacks, and that makes copper the ideal cost-effective tubing material. Drain, Waste and Vent - The design and installation of drainage systems range from simple to complex, depending on the type of building, the local code and the occupancy requirements. Fire Sprinklers - Copper tube will not burn or support combustion or decompose to toxic gases. Therefore, it will not carry fire through floors, walls and ceilings. Volatile organic compounds are not required for installation. Fuel Gas (Natural Gas and L. P.) Distribution - Copper tubing offers the builder, contractor and building owner many advantages when used in fuel gas distribution systems, and is accepted for use in all of the major model Codes in the United States. Copper tube is used for distribution of fuel gas in single-family attached and detached homes to multi-story, multi-family dwellings. In addition, copper gas distribution lines have been installed for many years in commercial buildings such as malls, hotels and motels.

SIGMA's Pneumatic Level Switches are used in application where electrical switching is not recommended or electricity is not available. The working principle is the same, except that the magnet indirectly actuates a 3/2 valve for changeover. This 2 system requires minimum 2 kg/cm clean filtered air, preferably through an AFR. Side Mounted (with / without cage) : Buoyancy force of process liquid on a float causes the float to move with the liquid's surface. Float movement pivots a magnet into the field of a like-charged switch magnet. As the magnets repel each other, the switch magnet moves, actuating the switch. Top Mounted :Float / Displacer (with / without cage) : Operation is based upon simple buoyancy, whereby a float or a spring loaded weighted displacer rises following the liquid level. A magnetic sleeve, connected to the float / displacer, moves up and operates within a non-magnetic enclosure tube. The magnetic sleeve attracts a pivoted magnet, actuating a switch mechanism located out-side the enclosure tube to give NO or NC changeover. A fall of liquid level will de-actuate the switch mechanism

We are a leading manufacturer and supplier of Double Hydrant System in Mumbai

• Color: Red
• Usage/Application: Water Flow Detection
• Model Name/Number: WFS-6000
• Brand: Honeywell
• Flow Rate: 110 LPM MAX
• Operating Pressure: 10kgf/cm2 (91750KPa)
• I Deal In: New Only

Pressure switches and sensors A wide range of analogue pressure switches and electronic pressure sensors is available suitable for pressures between 0 and 600 bar.  

The entrainment of condensate along with air flow in compressed air system to end use applications is extremely harmful, if system not drained regularly. The ideal solution for regular effective draining oil & moisture form compressed Air System is Electronic Auto Drain Valve. (E A D V).   Silent Features: Easy replacement of timer card only and not full assembly. Longest drain time frequencies for saving compressed air energy. Individual application capacities like receivers, filters and separators etc. Longer service life by way of having supplied with inlet 'Y' type strainers.   Technical Specifications Cycle time: 10 to 90 Minutes (Adjustable). Drain time: 1 to 10 Secs (Factory set 5 Secs). Working Pressure: Max 12 Kg. / cm2g. Working temp: 70 Deg C max. Elect. Supply: 230 V-1ph - 50 Hz. Housing: Weather Proof / Shock Proof (Powder Coated). Timer Display - Digital

• Media: Hydraulic Fluid
• Brand Name: Honeytech
• Material: PVC, SS, Brass/Bronze
• Valve Size: 1/2 inch BSP
• Packaging Type: Box
• Pressure: 230 VAC

• Features: Heavy Industrial CE Approval , 100 V/m EMI Protection

The M5100 series pressure transducers from the Microfused™ line of MEAS, set a new price performance standard for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids.

Low-Cost Differential Pressure Switch High Quality, Low-Cost Visual Set Point Indication Hassle-Free Field Adjustment Knob 2% Repeatability The Series 104 Differential Pressure Switch is a low-cost easy to use switch for very low pressure applications. The switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for 2A @ 250V and can be set as low as 0.08” w.c. (20 Pa)