Bearings Dealers in Ravi Nagar, Nagpur (10 products available)

Approved by Ministry of Road Transport & Highways (MORTH ) and RDSO Kanta Fiex Elastomeric Elastomeric Bridge Bearings are designed-and manufactured as per IRC: 83 (part II) - 1987 with its latest amendments, to meet the requirements of Mosrt &.H Specification for road & Bridge Works to Section No : 2000 T0 Clause NO : 2005 (Electrometric Bearing) : and to international Union of Railways Code No. U (C 772 R (Use of Rubber Bearings for Railways Bridges). It consists of one or more internal layers of elastomeric bonded to internal steel laminates shall be cast as single unit in a mould and vulcanised under heat & pressure, to cater for translation or rotation of the superstructure by elastic deformation. The raw elastomer used in Bearings are poly-Chloroprene. either of Brands: Neoprene WRT, Bayprene 110, skyprene B 5. &.. Denka S-40V in order to have low crystallization rate and adequate shelf life. The content of the Poly Chloroprene in the Bearing is not less than 60% and the ash content shall be less than 5%. The Steel laminates used in the Bearings shall meet the specification of IS : 2062. Techinacal Data of Bearings 10 KN is equivalent to I MT. Design load of the bearing is equivalent to 10M Pa. Shear modulus of the bearing shall be between 0.8 &. 1.2 M Pa. Ultimate compressive strength of the bearing shall be more than 60 M Pa. Dimension can also be designed as per requirement. Properties MORTH approved & RDSO Appd Trusted Bearing Economical Price & Delivery in Short Duration In-Housing Test Facilities Inspection By External Agency

• Material: Mild Steel
• Color: Black, Yellow
• Feature: Accuracy Durable, Corrosion Resistance, Dimensional
• Country of Origin: India
• Brand Name: KILKARI
• Length: 1350 Mm
• Model: Au-05
• Width: 600 Mm
• Height: 1650 Mm
• SAFE AREA: 2. 3 MTR X 1.6 MTR
• Powder Coating: The Powder Coating Done with Pure Pp of Reputed Brand.