Industrial Paint Dealers in Ramdaspeth, Nagpur (20 products available)

Cyclodialysis Spatula Cyclodialysis Spatula double-ended CIE 1680 0.25mm wide CIE 1682 0.50mm wide Castroviejo.

• Colour: clear to translucent

The primer ensures excellent adhesion of the thermoplastic strips onto concrete or old bitumen, thereby increasing the life of road marking. Being quick drying and easy to apply, no significant time under-runs are expected owing to primer application.

Thermoplastic road marking paint is specially designed taking into account Indian Traffic & Climate Conditions. The material can be manufactured to suit various weather & Traffic Conditions outside of India too.

• Features: Resistance to water , Highly efficient , Cost-effective

• Type: Chlorinated Rubber Paint
• Packing type: 20 liter
• Color: All Different color
• Form: Liquid, Solvent
• Finish: High Gloss

• Packaging Type: Plastic Bottle
• Packaging Size: 10-15 L, 400ml

Automark Technologies (India) Pvt. Ltd., is an ISO Certified Company It began its operations in the year 2002. Automark Technologies specialises in the manufacture of Thermoplastic Road Marking MaterialPaint, Primers for Application of Thermoplastic Road Marking Paints, Water Borne Marking Paints, Cobralite Retro Reflective Paint and Road Marking Machinery. The Automark Group today is the market leader in India in all the above areas.

• Packaging Type: HDPE Bag
• Brand Name: Addage
• Application: Construction
• State: Power Coating
• Country of Origin: Made in India
• Color: Off-White
• Features: Effective, Moisture proof, Safe to use
• Packing Size: 50 Kg
• Putty Form: Powder
• Categories: Building Coating, Wall Coating

Automark Technologies (India) Pvt. Ltd. can manufacture thermoplastic road marking materials to comply with the following standards, or as required by our customers: MORTH,  BS 3262:Part 1:1989, BS EN 1871, JIS K 5655, AASHTO M-249 We provide different grades of thermoplastic materials depending on whether the application is to be screed, extrusion or spray. Automark Technologies (India) Pvt. Ltd. is also able to provide specialized thermoplastic materials for producing structured road markings and raised profile marking / rib marking. We manufacture our thermoplastic materials to meet the various climatic conditions encountered around the world. Thermoplastic materials are available in white and yellow colours. We can manufacture other colours on request. Technical Data Sheets and MSDS available on request.    

Wall Putty is completely cement based putty which is white in color. It�s use is better for the exterior as well as interior walls of buildings. The white colored cement-based putty binds very strongly with base plaster in such conditions as well when the surface is damp and it forms a good and protective base. The pores (fine one) on ceiling and walls can be easily fills up and gives you a fine even and very smooth and dry surface which is best for painting. Wall putty gives an effective protection against flaking; so it assures you good even, looking smooth walls of your home for so many years.   Features / Advantages It is white cement based and skim coated. For application of paint it gives smooth and water resistant surface. It has as excellent adhesion. It causes no peel off because of seepage. It gives excellent finish, increases the durability of paint, and causes less consumption of paint. No need of primer. No kind of curing is required. Areas of application Application can easily applied on plastered surface. It gives fine finish and it is very useful for Inner and Outer walls. Surface Preparation and Application Before applying wall putty makes sure that the surface is free from dust or not, if not make it dust free. Also make sure that it is free from any type of fungus, greases, bitumen, and any kind of release agents, moss, paints, oils, loose particles or any kind of coating. Make sure that the surface should be free from all the above mentioned impurities otherwise it affects the workability of wall putty. Before applying make sure that the surface where the putty is supposed to be applied should be pre-wetted. This will helps you to provide a very strong bond with the substrate. Its better to apply at least two coats of Addage Wall Putty on plastered surface of wall (Each coat should be Max 1.5 mm of total thickness). Coverage The Addage Wall Putty covers almost more surface area that is exceeding to 9-10 Sq. ft. /kg. In two coats on new plastered wall.

Road Marking Paint, grouting product, Paint, Pulley, texture

elastic paint, Wear Resistant Plate, Sonic Soot Blower

Fluorescent Pigments, Resins, Masterbatches, metal powders, Paint Driers

Distemper, paints: dulux, Asian Paint

powder paint

plastic dyes, Duplex Boxes, sweet boxes

Transformer Paint, substations, extra high voltage cable

Loceryl Nail Lacquer, Veterinary Drugs, Animal Care Centers

Nail Paints, cosmetics product, embroidery material, Lipsticks

Decorative Paints, lead free paints, Wallpaper

Retroreflective Paint