Cool White ISI LED street Light , 50W , 240V
5,500 Per 1 piece
Solar Street Light
2,000 - 100,000 Per piece
10 piece (MOQ)
Best Deals from Street Lights
LED Street Light
950 Per Piece
50 Piece(s) (MOQ)
We are offering led street light available in smd 3050chip & cob type with lence.
Led Street Lights
1,000 Per Piece
Our company name figures amid the prominent Suppliers of LED Street Lights and offers the most lucrative deals to the patrons. In order to ensure zero defects to the products, we have installed automated warehousing system in our spacious warehouse. The system is supervised by well-trained personnel only.Features : High power Low electric consumption Bright light
LED Yard Light
4,500 - 9,000 Per Each
10 Set (MOQ)
By following the international quality standards, we procure raw materials only from the trusted vendors. Thus, we make sure that our finished products are superior and flawless. We have invested a large amount for developing automated warehousing system that is sprawling over a large area. The entire system in managed and maintained by our deft professionals.Features : Rigid design Long functional life Low maintenance High usability Enhanced performance Fine finish
LED Street Light
800 - 5,000 Per Piece
200 Piece (MOQ)
Garden Pole Light
14,000 - 50,000 Per Piece
Street Flood Light
Get Price Quote
Solar Street Light
3,250 Per
10 Piece(s) (MOQ)
LED Street Light
2,350 Per Piece
05 Piece (MOQ)
LED Street Light
Get Price Quote
LED Street Light
Get Price Quote
Street Light
Get Price Quote
Outdoor Bollard Lights
Get Price Quote
We hold expertise in manufacturing and supplying wide variety of outdoor bollard lights. Made with premium grade components, the outdoor bollard lights are known for their high performance and longevity. You can see our impressive outdoor bollard lights in parks, gardens, etc. Clients can choose the best outdoor bollard light from our huge assortment.
LED Street Light
1,100 Per Piece
LED Street Light
750 - 13,000 Per Piece
DC street light
Get Price Quote
SOLAR ROAD LIGHTING
Get Price Quote
LED Street Light
1,500 Per Piece
10 Piece (MOQ)
LED Street Light
2,247 Per Piece
5 Piece (MOQ)
15 Watt Solar Street Light
10,000 - 11,000 Per Nos
Lighting Type LED IP Rating IP65 Battery 12V, 42 AH Sealed Maintenance Free Battery Wattage 20 W Warranty 1 Year
LED Street Light
360 Per Piece
100 Piece (MOQ)
Street Light
Get Price Quote
Applications/Features Of SOM 50 Street Light Power – 50 WattEfficiency > 85%Constuction Material – Pressure dia cast AluminiumSilicone gasket for moisture protectionToughened clear glassIntegrated Navitas electronic LED driver PF>.95 nad THD 70%Can be mounted on Ø75 or Ø100 pole.Power Factor >0.90Lumen Output > 115lm/W
50 Watt LED Street Light
1,850 Per Piece
15 Piece (MOQ)
road lighting
Get Price Quote
We are offering road lighting. Type of road light bracket mounted type of road light construction alluminium sheet type of reflector stainless steel type of front glass acrylic cover type of glass locking arrangement ring aluminium clamp degree of ingress protection ip 65 type of color ultra violate blue in texture type of lamp used 1x250 & 1x400watt mhhpsvmv operating voltage 220-240 ac 1 weight 12kgs approx
wall bracket light
3,050 Per Piece
LED Street Light
2,000 Per Piece
outdoor solar lights
Get Price Quote
Solar street lights are raised light sources which are powered by photovoltaic panels generally mounted on the lighting structure or integrated in the pole itself. The photovoltaic panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the nigh.solar led street or outdoor light with high efficiency. Most solar panels turn on and turn off automatically by sensing outdoor light using a light source.Solar streetlights are designed to work throughout the night. Many can stay lit for more than one night if the sun is not available for a couple of days. Older models included lamps that were not fluorescent or LED. Solar lights installed in windy regions are generally equipped with flat panels to better cope with the winds. Latest designs use wireless technology and fuzzy control theory for battery management. The street lights using this technology can operate as a network with each light having the capability of performing on or off the network. Solar Panel[edit] The solar panel is one of the most important parts of solar street lights, as the solar panel will convert solar energy into electricity. There are 2 types of solar panel: mono-crystalline and poly-crystalline. Conversion rate of mono-crystalline solar panel is much higher than poly-crystalline.Solar panel are varies from wattage systems. Lighting Fixture[edit] LED is usually used as lighting source of modern solar street light, as the LED will provide much higher Lumens with lower energy consumption. The energy consumption of LED fixture is at least 50% lower than HPS fixture which is widely used as lighting source in Traditional street lights. LEDs lack of warm up time also allows for use of motion detectors for additional efficiency gains. Rechargeable Battery[edit] Battery will store the electricity from solar panel during the day and provide energy to the fixture during night.
outdoor solar lights
Get Price Quote
We are offering best outdoor solar lights
Microcontroller Based 5 Channel Street Light Control Through RTC
Get Price Quote
Microcontroller Based 5 Channel Street Light Control Through RTC Schedules the ON/OFF of Street Lights so that it remains ON in the night and switched OFF in day. The timer can be programmed such that the lights will remain on from say 6:00 PM to 12:00 PM and again from 5:00 AM to 6:00 AM (AT89C51). This is a microcontroller based project. As the name suggests, the project is to use to schedule the ON/OFF of Street Lights so that they remain ON in the night and switched OFF in day. The timer can be programmed such that the lights will remain on from say 6:00 PM to 12:00 PM and again from 5:00 AM to 6:00 AM. Thus every channel can be programmed for two times. It has total 5 channels so the circuit can control 5 street lights. The circuit contains a Liquid Crystal Display which shows the Time and Date Calendar. It is also used to view and set the schedule of Street Light ON/OFF times. There are five buttons on the board : Clk to set the clock Hours and Minutes. This key is pressed and held while HH, MM and AM/PM key are pressed to set the clock. Tim This button is used to enter into the Timer Setting Mode and to move in the Timer Setting Menu. HH This key is used to increase the value of Hours in Clock as well as Timer Setting Mode. MM This key is used to increase the value of Minutes in Clock as well as Timer Setting Mode. AM/PM This key is used to toggle between 24hour and 12hour mode and works in only Clock Setting Mode. About the circuit :Figure 1 shows the circuit diagram for the digital clock. 2x16 LCD is connected to the port 2 of AT89C51. P1.0 of uC will provide the SCL (serial clock) and P1.1 SDA (serial data) for I2C communication. When the power supply is switched on it will give you the default date and time, but later you can change it to the desired value. After setting once, the backup battery will keep the clock ticking even after the power is not there. A little about I2C :There are basically four main conditions in I2C protocol. Start Condition Stop Condition Data Validity Acknowledgement Start Condition : When SCL is high and SDA H->L will be taken as start condition for the communication.Stop Condition : When SCL is high and SDA L->H will generate a stop condition.Data Validity : When SCL is high there should be no change in SDA line only then the data is valid, the data change should be made only when SCL is low.Acknowledgement : After sending of one byte of data the receiver has to acknowledge the sender for the successful reception. for this the sender make the SDA line high and receiver pulls down the SDA low, which tells the sender that data has reached safely. Now the source code written in assembly, basically implements the I2C protocol. Pin no. 18 and 19 are connected to the crystal. The function of crystal is to give pulses to the microcontroller which allows the microcontroller to do various calculations. Pin no. 9 of the microcontroller is connected to +5v through a capacitor of 10uF/50v. This causes the microcontroller to reset at Power ON and to begin execution of program from the first line. Pin 3(P1.2), 4(P1.3), 12(P3.2) and 13(P3.3) are connected to switches S1, S2, S3, S4 and S5 while the other end of switches are connected to Ground. So when a button is pressed the port pins P1.2, P1.3, P3.2 and P3.3 get a low depending on which button is pressed and the software inside the microcontroller can take appropriate action. IC 7805 is a voltage regulator IC. It is connected in the input voltage line and limits the voltage to +5v to the circuit. Even if the input voltage goes high up to 14 volts, this IC gives only +5v to the circuit thus preventing any damage.