Incubators Dealers in Nashik (23 products available)

Brand Name : New Red Lab

Application : Laboratory

Chamber Volume : 250 Litre

Material : Mild Steel

Temperature Range : 5 to 75 degree celsius

Type : Bod Incubator

Material : Stainless Steel

Certification : CE Certified, ISI Certified, ISO Certified

Application : Medical Use

Voltage : 220V

Condition : New

Frequency : 50Hz, 60Hz

Warranty : 1 Year

Automation Grade : Fully Automatic

Brand Name : Mack

Temperature Range : 5 Degree C to 60 Degree C

Uniformity : + 1.0°C

Use in : Laboratory

Accuracy : + 0.5°C

Type : Walk-In

Voltage : 220V

Frequency : 50Hz

Automation Grade : Fully Automatic

Temperature Range : 10 to 60 Degree C

Model : CBbo4k

Accuracy : ± 0.2 Degree C

Uniformity : ± 1 Degree C

Equipment : PLC based BOD incubator (Walkin type) (Also available in controller based ) Control system : Allen Bradley PLC controlling temperature and humidity. Also connected to IOT device to access chamber via mobile Refrigeration system : An eco-friendly refrigerant (R-134) is used in a compressor which satisfies the requirement of CFC free cooling system. Copeland (Emerson) make compressor will be hermetically sealed and coupled with evaporation coil& condenser. A standby refrigeration system will be provided for continuous function during fault Air circulation : To get an uniform temperature a centrifugal blower connected to a motor will blow the steam & air from up to down, controlled by PLC Heating system : SS. U shaped nichrome wire Insulation : 80 mm sheet of PUF (Poly Urethane Foam) Trays : Stainless steel perforated or wire mesh as per the requirement. Trays will be adjustable as per sample size Illumination : LED light is provided for bright illumination and low power consumption Fault Indications : Audio visual indication is provided for all types of fault occur in the chamber Validation port : A 60 mm port hole sealed with silicon rubber is provided on the side wall of chamber for validation purpose Sensors : Hygroflex sensor to sense both temperature and humidity Software : CDAQ complying 21 CFR part 11   Optional features To avoid critical conditions and for ease of operation Hooter GSM technology Extra trays Extra sensor   Certification : ISO 9001:2015   Wireless access : A direct access to chamber is possible via mobile using IOT device

Product description   this bacteriological incubator are made as per guideline of gmp supplied with iq oq & pq document with calibration report for pid controller.   technical specifications:   triple walled construction inner made of s.s.316 mirror polished outer made of s.s.304 dull finish gap between the two walled filled with glass wool insulation of 65 mm heating element is made of s. S. ‘u’ type tubular nichrome wire with s.s. Sheathing heaters are placed at the right & left side of the inner chamber pid controller with auto tuning facility with double display to view set & current temp temp. Range 5 c above ambient to 60 c with accuracy of ± 0.5 c. silicon rubber gasket fitted on door to prevent lost of heat control switch & pilot lamp are fitted on front panel supplied with s.s. Rod type jali optional accessories: digital timer to cut off the heater at set interval pid controller with printer interface to record set valves & actual valves data & time 80 column dot matrix printers safety controller with alarm for temp. Overshoot single 4 point/8 point data logger

We are one of the foremost Importers and Suppliers of BOD Incubator from Nashik, Maharashtra. The BOD Incubator, we offer, has been catering to the needs of many for biological oxygen demand determination and many other applications. Customers, from around the country, have appreciated the products that we dole out for their sturdiness, dependable operation, and low maintenance. And quality of these products is another aspect by which we swear.    Technical Specifications : Double walled cabinet mounted on castor wheels Inner chamber made of S.S.304 & Outer chamber made of M. S. Powder coated Full Length inner acrylic door permit inspection of specimens with out disturbing the Temp Temp. Controlled by solid State Digital controllers housing all the control with PT-100 sensor illumination light are provided for viewing with door limit switch CFC Free hermetically sealed compressor provide temp. For below ambient condition Air circulation fan for maintain Temp. Uniformity through out the chamber Flush fitting insulated double walled door The Chamber is provided with modular removable shelves made of S. S. For complete flexibility in use To work on 230 volts 50 H2 Validation Protocols : IQ OQ & PQ Documentation with calibration & Tradability certificate of controller. Safety Features : Built in Temp Deviation Audio visual alarm, Safety thermostat for overshoot Temp. Cut off system. HRC Fuses for compressor heater & mains Time daily circuit for safety of compressor. Special Care : A suitable K V. A. Servo stabilizer is strongly recommended.

Material : ABS

Voltage : 220 V

Brand : Fortuna

Usage/Application : Laboratory

Model Name/Number : FDBI20

Temperature Range : 5 to 75 degree celsius

Number Of Shelves : 2 Shelves

Air Flow : 100 CFM

Warranty : 1 Year

Range : 20°C to 60°C

Accuracy : <=+/- 0.2°C

Uniformity : <=+/- 1.0°C*

We are offering bod incubator. Technical specification temperature range: 10° c to 60 °c accuracy: + 0.2 °c uniformity: + 1.0 °c features 21 cfr part-11 compliance log data, event data, audit trail data, e-records & e-signatures, graphical analysis & data acquisition. Optional features scanner gsm technology hooter system extra tray

Voltage : 110V, 220V

Condition : New

Frequency : 50Hz, 60Hz

Temperature : 0-50Deg C, 100-150Deg C, 50-100Deg C

Volume : 100-150ltr, 150-200ltr, 250-300ltr, 300-350ltr

Automation Grade : Fully Automatic

Laboratory Incubator offered by us is used for incubation of organic matter in waste water. Laboratory Incubator designed by us is widely used in laboratories and in different biological activities. Our Laboratory Incubator is compactly designed and has many advanced features to make the incubation process smooth and accurate. These Laboratory Incubators are designed as per the medical standards to meet the requirement. Technical Data Double wall outer body of mild steel with 7 tank process powder coating Inner made of zinc steel Temperature controlled by hydraulic thermostat wit 1 deg. C accuracy Digital temperature Display The Inner Cabinet totally insulated Uniform temperature on all shelves There are two shelves in cabinet Double door with inner glass door

Temperature Range : 10° C to 60 °C

Accuracy : + 0.2 °C

Uniformity : + 1.0 °C

Features:21 CFR PART-11 ComplianceLog data, Event data, Audit Trail data, E-Records &E-signatures, Graphical analysis & Data acquisition. Optional FeaturesSCANNERGSM TECHNOLOGYHOOTER SYSTEMEXTRA TRAY

Type : Bod Incubator

Material : Aluminum, Mild Steel

Certification : ISO Certified

Application : Industrial Use

Voltage : 110V, 220V

Condition : New

Frequency : 50Hz, 60Hz

Automation Grade : Fully Automatic

Temperature Controller : Microprocessor / PLC

Display : LED / HMI

Capacity(Littre) : 130-250 Ltrs.

Agitator number : 1or 2 each capacity 24 Blood Bags

Material : SS, ABS

Voltage : 220 V

Frequency : 50 Hz

Usage/Application : Hospital

Ample Power : 3 Hour Battery Backup

Oxygen Cylinder Capacity : 5 L

Number Of Wheel : 04

Platelet Incubator, Vinyl Flooring, wall to wall carpet flooring, Wallpapers

We are well known for supplying of wide variety of Poultry Incubators.

Cooling Incubators, Lab Instrument, Deep Freezers, Bod Incubators

lab incubator

Incubators, electronics systems, laboratory testing equipment

hatcher poultry appliances, wooden furnitures, furniture fittings & fixtures.

Platelet Incubator With Agitator, medical furniture, Blood Bank Refrigerator

Poultry Incubator, Electric Brooder, Gas Brooder, poultry heating system