Plastic Testing Equipment Dealers in Nashik (2 products available)

Product Description   Melt Flow Index Apparatus for plastic measures the melt flow index of plastic material. The system consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruder tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The heater logged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with a insulation of PTFE to prevent sticking of the extrudate. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER & other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extrudate are also supplied with the equipments.   The distance between the driving and the flexing rollers can adjusted with the help of a screw arrangement to enable the belt to be mounted over different flexing rollers and to allow for small differences in belt length. This is done by turning a hand wheel on the side of the tester. The tester is fitted with an acrylic front cover and a wire mesh safety guard, which allows adequate circulation of cooling air round the test specimens during the test. For safety of the user, the motor can be started only when cover is closed.

Our company has achieved widespread recognition in offering Erichsen Cupping Testing Machine to the clients. This product is widely acknowledged for high strength and rugged construction. Erichsen Cupping Testing Machine is available in various specifications following the requirements of clients. This product is engineered in strict compliance with industry standards and guidelines by using first grade components and advanced technology at well developed manufacturing unit. Offered range is well known to be hugely resistant to corrosion with precise surface finish.