Resistance Meters Dealers in Nashik (28 products available)

We offer Micro Ohm Meter. Features True Four Terminal Measurement Regulated and Highly stable 1 Amp Current Source 3 ½ Digital LED Display 1uOhm resolution on 2000 uOhm range Stable and fast measurement Technical Specifications Range : 1 uOhm - 19.99 KOhm Accuracy : +0.5% of reading Display : 3 ½ Digit LED Display Power Supply : 230V AC, 50Hz, 1 Phase Standard Accessories One set of Test leads (1 meters) with Crocodile clips Mains Cord User Manual

• POWER SUPPLY: 240V AC ±15% , 50Hz ±5%, single phase.
• ACCURACY: 0.5% ± 1 digits over the entire range.

It is specially designed for Highly Inductive objects like 400KV220KV.Special care is taken for measuring 3 phase transformers by using band switch matrix, to avoid climbing on transformers for safe & measurements. This is only indigenous TWRM which gives very fast readings for 3Phase Star-Delta any combination Transformers. The built in open circuit 30 Volts Dc Supply ensures that core of the transformer is saturated for fast measurements to be taken. Instrument uses ratio-metric circuit where the resistance of specimen is compared with known internal standard and 4 ½ digit LEDLCD display is provided for resistance measurement in milliohms and in ohms. Care is taken to absorb the Back emf of such transformers. For user safety, Indication for discharges is provided on front panel , if the current through winding under measurement is disturbeddiscontinued. Instrument has built in 10A regulated and highly stable current source with current selection of 10Amp,1Amp, 0.1Amp & 0.01Amp.

• Voltage: 42Volts
• Model Number: XWRM-10
• Brand Name: MOTWANE
• Pay Mode Terms: T/T (Bank Transfer)

• Feature: Soil Resistivity measurement , Earth Resistance measurement

This meter has rechargeable long life battery which reduces the cost of battery. It has 128Hz test frequency which eliminates the harmonics interference. Earth resistance is measured by three wires & Soil Resistivity is measured by four wire measurement techniques.

• Model Number: DET 10
• Application: Industrial
• Brand Name: Shanti
• Weight: 1.8 kg
• Dimensions: 17.8cm x 12.2cm x 12.6cm
• Handling Time: 2-3 weeks
• Scale Length: 90mm

PE-ORDF-2 Oil Resistivity & Dissipation Factor Test set is a combination of 3 instruments, which can be applied to measure Resistance & Tan-delta of the Oil under test. The Volume Resistivity of insulating oil is derived from the measured value of Resistance. It is 3-piece set, consisting of the Heater unit (and Stainless Steel oil cell), Million-mega-ohm meter, and the Dissipation Factor bridge to derive the readings. The Insulation resistance testing instrument is available in max test voltages of 500V DC and 1000V DC, and can be ordered accordingly. Voltages lower than them are available to be set from the front panel via the selector switch FEATURES - Wide measurement range- Completely solid state circuitry, hence drift-free operations- Completely protected against all overloads and short-circuits- Suitable for testing “Earthed” samples- High power coil heating, precision point control implemented- Adjustable temperature from ambient to 150 deg C- Separate visual push buttons for “Charge” & “Discharge” for rapid and safe testing- Can implement testing as per ASTM D924, IEC60247, IS6262/6103 test methods

• Application: EARTH RESISTANCE TESTING
• Usage: Industrial
• Storage Temp Range: 0-50DegC
• Weight: 750 g
• Dimension: 165 x 50 x 95 mm

We are the leading exporters and supplier of this products.

• Brand: ELECTRONIC SWITCHES PVT LTD
• Model Name/Number: Coil Resistance meter
• Usage/Application: Industrial
• Display: 1/2 INCH , 7 SEGMENT DISPLAY

• Application: Earth Testing
• Display: Analog
• Frequency: 50 Hz
• Power Supply: 220 V

• Power: 230 Volts, 50/60Hz, single phase, 400 Volts, 50/60 hz Three phase
• Weight on Sample: 2psi + 2psi separate weights provided
• Sample Size: 2 inch and 4.5 inches Diameter
• Controls: Digital Preset Cycle counter
• Paint: Powder coated & Chrome finished

Product Description   The most commonly used method to evaluate print quality is by rubbing 2 printed surfaces against each other. However if this is done manually, the amount of pressure applied during rubbing cannot be quantified and kept constant. Moreover it is difficult to keep the plane of contact constant and keep a track of the number of rubs. Hence making this method highly Operator Dependent.   Features   • Widely used in the Packaging Industry for labels put on bottles, boxes and laminated packaging. • It gives fast, repeatable and accurate results. • Simple and easy to operate. • Buzzer prompts automatically when test is completed. • High efficiency. • Low maintenance.

• Brand Name: Fluke
• Protection Level: IP30
• Storage Temp Range: -20 DegreeC to 60 DegreeC
• Reference Temp Range: 23 DegreeC +-5 DegreeC
• Humidity: < 75% -85% Rh
• Weight: 750 g
• Conductor Size: 35 mm
• Dimension: 276 x 100 x 47 mm
• Battery life: 8 hours
• Power consumption: 40 mA
• Battery Type: 9 V Alkaline
• Measuring frequency: 3.333 kHz

• Country of Origin: Made in India
• Usage/Application: Industrial
• Display: LCD
• Measuring Frequency: 50/60 Hz
• Weight: 10 kg
• Range Selection: 10Amp

• Country of Origin: Made in India
• Brand Name: SIVA
• Model Number: TWRM-25AuP
• Usage/Application: Insulation Resistance
• Usage: Laboratory,Industrial
• Display: 4 1/2 digit LCD display

We also provide Repairing & Calibration Services Of Insulation Resistance Tester.+-3% on first 3 ranges and +-5% on next 2 ranges on center scale,0-50 A with multiplying selector of 10^-6 to 10^ -12,10 Meg – 10^9 Meg in seven ranges

We are the manufacturer of our products. Some of our successful collaborations have been in manufacturing of Meter movements, Complete analogdigital meters, Multilayer SMT PCB assemblies, Digital meters sub-assemblies, Transformer cores, Coil windings, Small transformers, Punched metal components & Plastics injection moulding components.

• Model Number: AET 23
• Application: Earth Testing
• Brand Name: AGAM
• Display: 2000 count large-size LCD display with integrated backlight
• Country of Origin: Made in India
• Features: Measurements of earth resistance across three ranges: 0-20 Ohms, 0-200 Ohms and 0-2000 Ohms: Wide ra
• Storage Temp Range: 20 - 60 Degree C
• Storage Humidity: 80% RH(no fog)
• Weight: 560 g
• Dimension: 160mm x 100mm x 70.5mm
• Battery Type: 1.5V Alkaline Batteries (LR6) x 6
• Operating Temperature: 5 - 40 DegreeC
• Relative Humidity: 80% RH(no fog)
• Lcd: LCD Size: 70.6 mm x 34 mm
• Memory Capacity: Memory storage up to 20 records

Measuring system for testing and verification of protective earthing, step voltage and contact voltage and measurement of specific earth resistance of power stations, substation, distribution towers and other power systems.

Insulation Resistance Tester, Light Intensity Measuring Instrument

W e specialise in the design and manufacture of the test and measuring instruments for the cable industry . Kno wledge about need of our customers has allowed us to dev elop a range of equipments which have been widely accepted the industry. We are constantly putting our efforts to introduce state of the art technology in the field of test and measuring instruments. With these efforts we have de veloped Conductor Resistance Meter model CRM-1 for communication cables & copper wires.

Insulation Resistance Tester, High Voltage Capacitor, Oil Test system

Insulation Resistance Tester, capacitance testing equipment

earth testers, Continuity Tester, Step contact voltage measuring system

earth testers, analog panel meter, Multimeter, Digital Panel Meters

Transformer Winding Resistance Meter, Clamp Meter, Insulation Tester Digital

Winding Resistance Meter

Transformer Winding Resistance Meter, Harmonic Filter Reactor