Dust Collectors Dealers in Rabale, Navi Mumbai (26 products available)

Normally,Lot of dust is generated during the compression process/coating pan/Auto coater.Excess dust in the compression zone can led to black particles,it is therefore advisable to have dust collector unit attached to the tablet press to suck out the dust generated .This is trolley mounted machine,which will use fro multiple applications.

Centrifugal Blowers are available either in Single Inlet Single Width (SISW) or Double Inlet Single Width (SISW) OR Double Inlet(DIDW) type and fabricated and stiffened with M.S. angles at Inlet and Outlet drilled flanges are incorporated for easy connection pf the Fan to the System. The Impeller is of backward inclined design, statistically and dynamically balanced and mounted on the Shaft Drive arrangement could be direct or through V Belts depending on specific requirements.

Bag Filters are used for the recovery of particulate matter from exhaust gas which enables to:   Avoid pollution problems Recover finished product thus increasing plant yield Apart for bag filters other equipments such as cyclones, venturi, scrubbers, electrostatic precipitates etc. can be used for the recovery of particulate matter. However, out of all these equipments bag filter becomes the best choice under the following circumstances:   The final product is very expensive and as a result high collection efficiency is required. The particulate size is very fine.

• Capacity:: Capacity:5 kilograms to 300 kilograms

The atmospheric air is sucked in the dryer through 510 micron filter by an efficient dynamically balanced fan driven by an electric motor. The clean air then passes over the electric heaters steam or oil radiator provided with temperature controller. The hot air passes through the product and fluidisation dries the product. Dryer is provided with dehumidifier (Chilled water system) at the inlet of the dryer so as to dry the product at low temperature under fluidized condition. The blower speed is controlled by A. C. frequency drive so as to control the fluidisation avoiding choking of the filter bag. A raking system provided to avoid lump formation in the container to achieve uniform fluidisation & uniform drying. A model with complete automation and PLC, automatic bag shaking and with mimic is also offered. Promas Engineers is manufacturer, supplier and exporter of fluid bed dryers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Application: To dry material by fluidisation with hot and or dehumidified air.

Our Multibag Polishing Filter is among the most applauded products manufactured by the company. Manufactured using optimum quality raw material and technology, the Multibag Polishing Filter offered by us is at par from other models available in the market. Special Features Demanded for post filtrationFitted with quick opening type arrangementsFilter bags available as per process conditionCan be availed with single or multi bagsEasy operation controlsEasy to clean Filter Bags Used PPPPSPolyester PolyamideSpecial material as per requirement

• Country of Origin: India
• Condition: New
• Packaging Type: Wooden Box, Carton Box
• Overall Height: 130mm
• Particle Size: 100 Micron
• Pore Size: 0.22
• Specialities: Ease Of Install, High Tensile, High Quality
• Brand Name: Britomatics

Most bag-houses use long, cylindrical bags (or tubes) made of woven or felted fabric as a filter medium. (For applications where there is relatively low dust loading and gas temperatures are 250oF or less, pleated non-woven cartridges are sometimes used as filtering media instead of bags.) Dust-laden gas or air enters the bag house filter through hoppers (large funnel-shaped containers used for storing and dispensing particulate) and is directed into the bag house compartment. The gas is drawn through the bags, either on the inside or the outside depending on cleaning method, and a layer of dust accumulates on the filter media surface until air can no longer move through it

Air Dust Collector collects dust produced from industries and protect them from air pollution. We are one of the leading Manufacturers and Suppliers of Air Dust Collector from Maharashtra, India. The Air Dust Collector offered by us is widely appreciated for its high performance, durability and longer functional life. Customers can avail Air Dust Collector from us at a very reasonable price.

We manufacture broad range of filter bags for e.g. Polypropylene filter bags, cotton filter bags and polyester filter bags available in different size and woven non woven fabric generally utilized as a part of filtration of edible oil, chemicals and gasses.we manufacture and supply high quality filter bags in different compositions like cotton, polyester, polypropylene, and acrylic. Moreover, these are offered with different additional finishes like silicon treated for moisture repellency, egg shell finish for adhesive dust, anti static for static charge generating dust etc. Even more, the particular bags are also tailor made in most recent specialized imported devices to match particular customer’s necessity and sizes.

We manufacture broad range of filter bags for e.g. polypropylene filter bags, cotton filter bags and polyester filter bags available in different size and woven/ non woven fabric generally utilized as a part of filtration of edible oil, chemicals and gasses. We manufacture and supply high quality filter bags in different compositions like cotton, polyester, polypropylene, and acrylic. Moreover, these are offered with different additional finishes like silicon treated for moisture repellency, egg shell finish for adhesive dust, anti static for static charge generating dust etc. Even more, the particular bags are also tailor made in most recent specialized imported devices to match particular customer’s necessity and sizes.

Stainless Steel Bag Filter Housing, blending vessel, cold treatment tank

• Diameters: 133mm to 400mm
• Frequency: 50Hz and 60Hz.

Backward Curved Fans also known as Radial Fans are Centrifugal Fans with Backward Curved Blades. These Centrifugal Fans provide very good cooling at high pressure conditions. The impellers of these industrial fans are highly resistant to dirt & dust. Hicool manufactures Backward Curved Fans of frequency 50Hz and 60Hz. These industrial fans are available in various wheel diameters ranging from 133mm to 400mm. These fans are available in 230 VAC.

Integral part of any batching plant NOT ONLY to keep pollution under check BUT ALSO to recover & recycle the dust/powder material back into the system. Available with 2 types of cleaning arrangement - air pulse jet cleaning OR vibratory cleaning in SILO TOP mounting or ground mounted version with fan, hopper and ducting (client scope) for cyclic de-dusting of more than 1 silo. Salient Features Compact design with weather & bird proof cover, easy interchangeability, easy operating height for maintenance as & when required. Unique design for venting of silo capacity of 25-250 Tons. Available with various filtering media suitable for different dust material. Available Ex-Stock & Easy Interchangeability Filter Hoppers Filter Hoppers are used under air filters as reservoirs for collected dust and are designed also to carry the filter itself. Filter hoppers are produced with a single inlet as standard and all inlets have a dust suppressing unit. The standard outlets have a flange for butterfly valve.

This filter is pressurized, gas, filteration. The filter bags are extremely durable and available in various needle felts with micron, rating from 1-200 and nylon monofilaments from 5-800 microns. Flow rate varies from 1 to 430M3/hr.

We are manufacturing FRPBlowers using the finest grade fiberglass reinforced plastic and coloring agents. Functioning smoothly from Mumbai(India); we are capable enough of serving the clients in a shortest time possible. As, our products are manufactured following guidelines set by international quality managements systems, they are of unmatched standards.

Industrial Centrifugal Blowers, plastic equipment, process equipments, Frp

Ladle, Industrial Scrubber, Scrubbers, Multi Louver Damper

Filter Bag, switch boards, Electrical Goods

pp filter bags, Filter Press Sheets

Dust Collector Bag, Bellow, Filter Bag, high temperature bellow, Strainers

Pleated Filter Cartridge, Mono Filament Fabrics, ss scoop, PP Scoop

dust collection bags, Steel & Stainless Steel Products & Components

star filter bags, Flexible Bellows, Pocket Filters, suction filters

high viscosity liquids filtration bag filters, precision bag filters

Hydrocarbon Traps, Back pressure regulators, Oxygen Traps

Air Capture Hood, VOC Gas Analyzer, Cleaning Validation Swabs