Filter Press Dealers in Gidc, Navsari (8 products available)

We manufacture Semi Automatic Filter Press with electro mechanical plate shifting device for individual Plate shifting with a Pick and Plate type Reciprocating shuttle. For shifting with total speed control, Hydraulic or electric motor is used. We offer the highly efficient Semi Automatic Filter Presses.

Size : 305mm X 305mm

Filter plate Recessed chamber plate,Gasket chamber plate,Non-gasket chamber plate, Membrane squeeze plate,Plates and Frames up to 6kgcm2 operations,5 kgcm2 to 15kgcm2 operations.

The operation of conventional filter presses have always been messy and labor intensive. With ever increasing labor cost there arose a demand for atomizing several filter press operations. N.M. Patel Engg. was first to develop & offer automatic filter presses with following features.    Auto Shaking mechanism The filter press with precisely engineered auto shaking mechanism will shake the group of plates at one time maintaining the predetermined gap between the two plates via chain or rope. The auto shaking mechanism is run by electric or hydro-motor shaking the plates with suitable revolutions adjusted by means of PLC, which co-relates the filtration sequence without operator’s attention. AUTO PLATE SHIFTER FILTER PRESSThis highly advanced arrangement, provides fully automated closing and opening. When the filter is ready for cake dumping, the double acting cylinder retracts, pulling with it the movable head or follower. As soon as the followers is fully retracted, the shuttle shifter takes over, picking up the first plate from the head end of the unit, moving it across the opening or cleaning space to expose the cake and stacking it against the follower. The shifter then automatically reverses, returns for the next plate, transports and stacks it against the first plate and so on with time cycle set in PLC. Until all of the plates have been successively shifted and chambers dumped. An over-ride is provided so that the shifter can be stopped at any time and its motion resumed when the operator desired. Drip Trays in Bombay Door ConstructionDrip Trays are kept below the plates or Plate & Frame. It serves the purpose of collecting Drip (Filtrate) during the filtration or water during washing which falls due to capillary action from the Filter cloth.Arranged underneath the filter plate set.Fabricated of steel with plastic coating, stainless steel or entirely of synthetic material. Operated manually or fully automatic by means  of electro gear drive or hydro motor. Accident Prevention  As safety precaution for the operating personnel. Safety Light Curtain to interrupt operation with pull-cord in order to re-start the closing and plate shifting device.

This Membrane Filter Plates operate to a feed pressure of up to 7 bar and the squeezed pressure can be up to 15 bar. PANAMA ENGINEERING can manufacture special plates for special needs for high feed pressures or low squeeze pressures. PANAMA ENGINEERING manufactures membrane plates with thermoplastic or 100% polypropylene.

The Membrane filter plates are the technological development of the recessed plates. These elements come with variable chamber depth which is adjusted depending upon the filterability and quality of slurries to be treated. Mixed pack membranes are the most common & cost effective configuration where the membrane and recessed plates are set alternatively so every second plate is provided with flexible and replaceable filter face of rubber on both the side. This configuration allows variable chamber depth through membrane squeezing. These plates are mainly used to increase the cake dryness (reduce moisture content), shorten filtration, effective washing and discharge time and they are achieve by inflating the flexible membrane diaphragm filter face, contrary to conventional plates. For inflation of membrane generally water or air pressure is used by pumping in the squeezing chamber. The replaceable membrane are either from Rubber or EP family which has great advantage of elasticity gives extreme deflection of membrane so the final cake receive the consistent high dryness. Due to Squeezing process the Membrane Plates offers following advantages.– Reduction in Moisture content in the final filter cake– Reduction in Filtration, Washing as well discharge time.– Reduction of washing liquid consumption due to more homogeneous cake structure.– Increased Uniformity in dewatering of the filter cake.– Improvement in cake release from the filter press.– Saving in filtration process cost and time. Membrane plates are available with center, top center and corner feed designs for up to 16 bar operating pressure.

each fitted with a durable permeable cloth. The recessed plates are pushed together in normal operation. The pressure required for dewatering is provided by the feed pump. During the filtration cycle the sludge is initially pumped into the chambers at a high rate. This rate is reduced as the chambers are filled and the pressure builds. The cloths retain the solids, allowing water to pass through as filtrate. Once the pressure in the press reaches a set point and the filtrate is reduced to a trickle the dewatering cycle is complete. The next stage of the process is to empty the press by opening the plate chambers and allowing the dewatered cake biscuits to drop out. This entire operation can be a manual, semi automated or fully automated process. Once the press is empty the plates are returned to the closed position, ready for further batches. The manual filter press unit is fitted with a hand pump, and is ideal for small sludge volumes. The semi-automatic filter press range, with a hydraulic pump for plate pack closing. The fully automatic machine includes automatic plate shifting, plate vibration and drip trays. A number of options are available to assist ease of operation for all models, including the Air-Track plate shifter, membrane plates for increased filtration pressures.

the membrane filter plates are the technological development of the recessed plates. These elements come with variable chamber depth which is adjusted depending upon the filterability and quality of slurries to be treated. Mixed pack membranes are the most common & cost effective configuration where the membrane and recessed plates are set alternatively so every second plate is provided with flexible and replaceable filter face of rubber on both the side. This configuration allows variable chamber depth through membrane squeezing. These plates are mainly used to increase the cake dryness (reduce moisture content), shorten filtration, effective washing and discharge time and they are achieve by inflating the flexible membrane diaphragm filter face, contrary to conventional plates. For inflation of membrane generally water or air pressure is used by pumping in the squeezing chamber.      the replaceable membrane are either from rubber or ep family which has great advantage of elasticity gives extreme deflection of membrane so the final cake receive the consistent high dryness.     due to squeezing process the membrane plates offers following advantages.- reduction in moisture content in the final filter cake- reduction in filtration, washing as well discharge time.- reduction of washing liquid consumption due to more homogeneous cake structure.- increased uniformity in dewatering of the filter cake.- improvement in cake release from the filter press. - saving in filtration process cost and time.    membrane plates are available with center, top center and corner feed designs for up to 16 bar operating pressure.