Elab Engineering Gautam Budh Nagar, Greater Noida, Uttar Pradesh

These are made available to our customers at nominal rates. This one is a fine model that displays a rotary engine that takes energy from moving water. These were widely used for industrial power prior to electrical grids. Now they are mostly used for electric power generation. We always ensure the on-time delivery for all of our products in a less turnaround time.

A Water Bath is a laboratory equipment made from a container filled with heated water. It is used to incubate samples in water at a constant temperature over a long period of time. All water baths have a digital or an analogue interface to allow users to set a desired temperature. Utilisations include warming of reagents, melting of substrates or incubation of cell cultures. It is also used to enable certain chemical reactions to occur at high temperature. Water bath is a preferred heat source for heating flammable chemicals instead of an open flame to prevent ignition. Different types of water baths are used depending on application .When temperature is above 100 °C, alternative methods such as oil bath, silicone bath or sand bath may be used

Our company has established itself as a leading manufacturer, trader and supplier of superior quality Wall Racks in the market at the present scenario. These are made available to the customers at industry leading rates and are provided as per the set industry norms and protocols as well. We understand that an impressive display plays a very important role in the world of buying and selling. These are easily divided in proper sections and divisions.

Vertical Laminar Flow Cabinet from top to down stream through the inverted HEPA filter placed on the top of the work space, working table is made with satin finish stainless steel top. The inner cabinet is made with marine plywood and outer covering is made with C.R sheet duly powder coated, front door with transparent acrylic provided with counter weight attachment for sliding operation and keep the door at required level. Sides of the cabinet is paneled with poly carbonate transparent sheet. Fitted with all standard accessories such as U.V. germicidal light, fluorescent light, provided cock for as gasair, pre filter & HEPA filter, inclined pressure manometer.

Heavy duty vertical bandsaw machine provided with cast iron machine table and guards for safety of the operator with saw guide for alignment of the saw blade complete with suitable electric motor 3 phase 440 volts, motor pulley, V belt starter and motor attachment.  

The Vertical Autoclaves is used for sterilizing the loaded material under steam pressure of 15 to 20 PSI. double walled construction, inner body made of heavy gauge stainless steel 304 quality sheet, duly argon arc welded. The lid and ring are made of stainless steel plate. The Vertical Autoclaves is fitted with pressure gauge, safety valve (adjustable spring loaded) and steam exhaust valve, provided safety valve is set to blow of at 15 PSI. A silicon rubber gasket is fitted in the ring to ensure stem tight joint of the lid. Outer body made with choice of S.S. sheet or M.S. sheet powder coated. Foot operated lifting mechanism for lid opening. Electrically operated, ISI quality immersion type heaters are used for heating. The Autoclave is supported with three sturdy legs duly painted, supplied with cord and plug.

Other details: Vernier calliper 5” steel chrome plate Vernier calliper 5” SS rust proof in plastic box Vernier calliper IME type 6” steel chrome plated in plastic or velvet box

Vacuum Pump offered by us is noted for its excellent functionality and is free from flaws. Features: Accurate dimensions Excellent ability to withstand pressure High strength

Double beam UV-VIS spectrophotometer with software Microcontroller based instrument having range 190-1100 mm, On-screen standard curve display on large 5 inches graphic LCD, 1.0mm spectral bandwidth, 1200 linesmm grating, 8 position auto cell changer,Wavelength scanning, PC connectivity through USB port & direct printer connectivity using parallel port interface. It has facility for WL Scan, Kinetics, multi wavelength & DNAprotein models, inclusive of PC software.

Universal Milling Machine. 

Gear Hobbing Machine model V-300 is designed for the production of precision Spur, Helical, Worm Gears, Splines, Sprockets, Rachet Wheels & any other form that can be hobbed. Its bed & column are of close grain casting & are well ribbed with V-type guideways. The shafts & Gears are made of alloy steels. The indexing worm wheel is of high grade Bronze material. The machine is equipped with Differential Mechanism for cutting helical gears. Provision has been made to remove backlash between the indexing worm & worm gear and also between feed screw & the nut of the hob slide. Oil reservoirs are provided in the machine which ensures thorough lubrication of gears & bearings. STANDARD EQUIPMENTS :  One Electric Motor 2 H.P. (960 RPM), One Electric motor 1 H.P. (1440 RPM), One Electric Coolant Pump, One work arbour, One Hob arbour, One set of 45 change gears,One set of spanners.  

Rough Milling attachment Single Lip Tool Grinder Indexing workholder Electric Acting Attachment Roll Engraving Attachment Machine vice with seivel base width of 100 mm jaws Rotary table 200 mm Template set A to Z and 0 to 9 height of 20 mm (set of 107 numbers) Machine lamp Dove Tail Strip for Template Auxilary Table   STANDARD ACCESSORIES : Electric equipment suitable for 3 phase, 415 Volts, 50 cycles, A C supply. Set of servicing Tools Two clamps for Workholder Two clamps for copyholder One spring collet for cutter spindle One collet for tracing stylus One set of 6 numhers stylus  SPECIFICATIONSDrive Motor 1/2 B.H.P.     2800 R.P.M. Cord driveSpindleSpindle speed range 1800 to 15000 R.P.M.Spindle fine adjustment 1/8" (3 mm)Spindle coarse adjustment 1/4" (6.25 mm)Spindle collet taper 10°PantographPantograph arm largest     1 : 1smallest     1 :50Work TableLongitudinal Travel 12" (300 mm)Main slide cross travel 6" (150 mm)Work table clamping area 12" x 6" (300 x 150 mm)Work table up and down 10" (250 mm)Copy Holder TableCopy holder table clamping area 18" x 10" (450 x 250 mm)Max. Height between copy holder and pantograph arm 3/4" (20 mm)Weight 350 K.G. approximately.

Being the leading names in the industry, we are offering an extensive range of Transistor Characteristic Apparatus. In this apparatus Input and output characteristic experiments can be performed by making suitable connections of power supplies, meters and transistor. We deliver this apparatus in well-defined time frame along with different specifications. Offered apparatus is inspected in terms of quality to supply a flawless range. Features: Accurate detection Rugged design Portable

TLC Plates offered is made available in forms of thin layer chromatography silica gel plate as demanded by customers. Features: High efficient thin layer chromatography silica gel plate Formed of fine quality thin layer chromaotography silica gel

The advanced Tissue Culture Flasks.Guarantee an even Surface refinement in growth zone as no chemicals are used, and surface is specially treated. Guarantee an even Surface refinement in growth zone as no chemicals are used, and surface is specially treated Have square mouths (instead of traditional round) to allow pipettes and scrapers to access entire flask surface area with ease Have caps that do not require turning or screwing to open or close. A simple push till a click is heard and the cap is in venting position. Another push till you hear a second click and the flask is completely sealed. For releasing, the sides of the caps only need to be squeezed. This results in saving of time and hand fatigue when a number of flasks are being handled

Being a well-established organization, we are presenting a wide range of Three Neck. The offered product is well designed by our adept professionals utilizing utmost quality material and innovative technology. This product is provided on several specifications as per the demand comes from clients. In addition to this, we offer this product after checking properly on various parameters in order to assure its flawlessness. Features: Precise engineered Easy to mount with meta frame Enhanced durability

Three Neck Round Bottom, Three Neck, Centre Neck And Two Parellel Side Neck With Interchangeable Joint

Ideal for routine clinical procedure, Incubation, Inativation, Agglutination as well as most serological, Pharmaceutical and biomedical procedure. Double walled construction outer body made of M.S. sheet, Powder coated,

Temperature Control Trainer is designed intended for knowing the basics of temperature control loop. This is the most preferred range as it reflects latest technological innovations in this domain. It comprises the most suitable components required to fabricate the machine. It is available in market leading prices so that clients can take the maximum benefits from it. Features Study design user friendly Self explanatory systems Electrical control panel Electrical safety consideration Available with training manual and mimic charts Easy operation Inbuilt safety measures Computer interface and SCADA software Specifications Electric Supply : 1φ 230 V AC 50 Hz. System Dimensions : 4 Ft. (L) x 1.5 Ft. (W) x 4 Ft. (H)

We are recognized as successful traders, manufacturers and suppliers of Digital PH Meter Table Model in the market at the present scenario. It is a device used for correctly measuring the pH, which is either the concentration or the activity of hydrogen ions, of an aqueous solution. It usually has a glass electrode plus a calomel reference electrode, or a combination electrode. These instruments are usually used to measure the pH of liquids, though special probes are sometimes used to measure the pH of semi-solid substances.

In line with clients' variegated requirements, we bring forth an extensive range of Steam Engine WorkingModel. Our offered products are completely checked by quality experts under strict parameters meeting all the norms. The offered product is well designed by our skilled professionals utilizing optimum quality material and innovative technology. Clients can avail these products from us at nominal rates. Features: Robust Construction Perfect Finish Enhanced functional life

The working of Steam Engine. Find out how Steam engine work. In early 19th century the railways were dominated by the Steam Engines. It worked on a very simple technique & principle. Find out how by purchasing this fun & interactive educational product.

A Spectrometer is an instrument used to measure properties of light over a specific portion of the electromagnetic spectrum, typically used in spectroscopic analysis to identify materials

With consistent focus on the current market, we bring forth an extensive array of Solar Energy Kit. Our offered products are highly praised for their superior quality. Our offered product is thoroughly checked on various parameters to deliver a defect free range. We offer this product at competitive price to our esteemed clients.