Power Connectors Dealers in Sector 32, Noida (4 products available)

• Shape: Round
• Application: Secure The Cable, Provide Connection Between Connector Interface And Conduit
• Color: Black
• Feature: Fine Finished, Good Quality, Good Strength, High-performance, Rust Proof, Strain-relief
• Condition: New
• Finishing: Color Coated
• Packaging Type: Box
• Country of Origin: Uk

    Hinged Connector Interface Fitting, Straight, 3-Way AMP Junior or Mini Timer Connector to Conduit, Conduit Size NC08/NW7.5, Operating Temperature -40 to 120 Degrees Celsius, RoHS Compliant, IP40 Rating, Very High UV Protection, Polyamide (Nylon), Black

Specifications BNC CONNECTOR, DC WIRE/PIN, SMPS (12V 1A TO 12V 20A), AUDIO BOX, IR 24 LEDs, IR 36 LEDs, IR 48 LEDs, GLASS, DOME CAMERA STAND. The BNC connector (Bayonet Neill–Concelman) is a miniature quick connect/disconnect RF connector used for coaxial cable. It features two bayonet lugs on the female connector; mating is achieved with only a quarter turn of the coupling nut. BNCs are ideally suited for cable termination for miniature-to-subminiature coaxial cable (e.g., RG-58, 59, to RG-179, RG-316). It is used with radio, television, and other radio-frequency electronic equipment, test instruments, video signals, and was once a popular computer network connector. BNC connectors are made to match the characteristic impedance of cable at either 50 ohms or 75 ohms.   Types and compatibility Types BNC connectors exist in 50 and 75 ohm versions, matched for use with cables of the same characteristic impedance. The 75 ohm types can sometimes be recognized by the reduced or absent dielectric in the mating ends. The 50 and 75 ohm connectors are typically specified for use at frequencies up to 4 and 2 GHz respectively. Video and DS3 Telco central office applications primarily use 75 ohm BNC connectors, whereas 50 ohm connectors are used for data and RF. Many VHF receivers used 75 ohm antenna inputs, so they often used 75 ohm BNC connectors. Compatibility The different versions are designed to mate with each other,[2] and a 75 ohm and a 50 ohm BNC connector which both comply with the 1978 standard, IEC 169-8, will mate non-destructively. At least one manufacturer[4] claims very high reliability for the connectors' compatibility. At frequencies below 10 MHz the impedance mismatch between a 50 ohm connector or cable and a 75 ohm one has negligible effects.[5]BNC connectors were thus originally made only in 50 ohm versions, for use with any impedance of cable. Above this frequency, however, the mismatch becomes progressively more significant and can lead to signal reflections. BNC inserter/remover tool A BNC inserter/remover tool also called a BNC tool, BNC extraction tool or BNC apple corer, is used to insert or remove BNC connectors in high density or hard-to-reach locations, such as densely wired patch panels in broadcast facilities like central apparatus rooms. BNC tools are usually light weight, made with stainless steel, and have screw driver type plastic handle grips for applying rotating torque. Their shafts are usually double the length of a standard screw driver. They help to safely, efficiently and quickly connect and disconnect BNC connectors in jack fields. BNC tools facilitate access and minimize the risk of accidentally disconnecting nearby connectors.

• Brand Name: FESTO, PARKER, SPAC, JANATICS, JELPC
• Feature: Perfect in dimension, Strong design, High structural strength

Electrical Connectors, Cfl Bulb, Electrical Cables, Electrical Panels