GAS Storage Tanks Dealers in Noida (19 products available)

Material : Stainless Steel

Storage Material : Gases

Brand : super Cryo

Storage Temperature : - 45 Deg C

Corresponding Pressure : 24 Kg/cm2

Design pressure : 22 to 26 kg/cm2

Country of Origin : India

Type : Co2 Storage Tank, Vertical

Material : Carbon Steel, M.S

Shape : Cylinder, Cylindrical

Certification : ISI Certified

Application : Co2 Storage

Color : Gray After Cladding

Condition : New

Capacity : 20000 litre

Surface Finishing : Primer

Constructional Feature : Insulated

We manufacture the Blending Tanks in Juice & Beverage Industries. The following type of Blending Tanks are manufactured. Blending and Mixing Tanks are available having the Volumetric Capacity of 500 Litres to 5,000 Litres. These Tanks can be single walled or with Dimple Jacket & with or without Insulation followed by Outer shell of SS 304 or MS depending Upon the specific requirement. These vessels are provided with Jet Mixers / Turbine type agitators for mixing, / High Shear Mixer / Pedal Mixer or Low shear Mixers with scrapper. One can have choice of having these vessels depending upon the requirement of various Food processing technology. Even it is possible to have these Vessels with two speed agitator cum scrapper moving in opposite directions.Provision can be made for two speed mixer. These vessels can also be supplied with Flat / Conical / Dished end bottom and top with loose / fixed cover. In case of Jacketed vessels the shell & Bottom are provided with the dimple jacket suitable for circulation of steam / hot / cold water. The dimple jacket Vessels are tested at 6 bar hence one need not use syphon for draining the liquid in the jacket. these jackets are suitable to work with on line supply of hot / cold water / steam up to a pressure of 4 bar However in case above standard designs are not suitable for particular requirement, one can very well ask to redesign the Vessels to suit individual requirement. Yes ! I am Interested

Color : Customized

National standard : GB 50128-2005

International standard : API-650-2007

After-sales Service Provided : overseas service provided

Standard for Oil Tank  National standard: GB 50128-2005 Construction and acceptance standard for vertical cylindrical steel welding oil tank International standard: API-650-2007 Standard of steel weld oil storage tank

Storage Capacity : 5000 - 25000 L

Height : 450 mm

Usage/Application : Chemical Storage

Brand : Technu

Density : 1.0 to 1.9

Wall Thickness : >8mm

Diameter : 1910 mm

Is It Leak Proof : Leak Proof

Is It Rust Proof : Rust Proof

Length : 1900 mm

Country of Origin : India

Type : Storage Tanks

Material : Metal

Shape : Horizontal, Vertical

Color : Silver

Condition : New

Surface Finishing : Coated

Nuberg HFD has a long legacy of know-how in the design and construction of storage tanks. Our portfolio includes execution of EPC contract for world wide major projects. The specification of the storage tank for this client includes diameter 2.4 m, length 11 m, thickness 20 mm and weight 20 Ton. Our reference since our establishment has grown to include more than 50 tanks designed to the optimum quality standards for both domestic and international clients. We are among a handful of global EPC players in the arena of delivering cryogenic storage solutions for the entire collection of service applications. Our expertise includes the entire range of storage tank solutions that encompass storage, handling, vaporization and refrigeration facilities. As a reckoned EPC service provider in this division with in-house capabilities, Nuberg brings to the table a well-established arrangement of experience in storage tanks. Conical RoofNuberg Engineering limited is focused on Cryogenic insulation technology equipment and systems. The company is one of the largest manufacturers of conical roof in India and is also a reputed supplier to leading international Companies worldwide. Nuberg has an impressive list of contented customers all over the world who stand testimony to our quality of products. Rectangular TanksIn Nuberg Engineering the rectangular tanks are designed with heavy walls for prolonged services under extreme conditions. The tanks supplied by Nuberg are used in multiple industries for plating, processing and storage. API TanksNuberg Engineering excels in fabrication and erection of API Tanks. Nuberg follows the standards of API-650 for its design, fabrication, testing and stamping of the tanks. Nuberg takes pride in successfully providing API tank solutions for over 40 years. DecanterNuberg supplies high quality decanter which are simple and safe in operation with a long life cycle. The materials used are corrosion and abrasion resistant materials. DeaeratorDeaerator is the result of Nuberg’s years of experience in fabrication and manufacturing of a large range of equipment in power plants. Nuberg designs Deaerator so that it can offer sustainability in extreme conditions. Also, it is largely maintenance free therefore making it a cost effective solution. Floating Head Type TankNuberg holds expertise in floating head type tanks. Our floating roof tanks are used by the major oil companies in India.

Brand Name : Steel Craft

Storage Capacity : 1000 L/ hr - 1000 L / hr.

tank material : Stainless Steel

Grade : AISI 304 Also Available AISI 316

Automation Grade : Fully Automatic

Design Code: : IS 2825, ASME Section VIII Div.1, ASME Section VIII Div.2, PD 5500

Design Pressure: : 24-28 Kg/Cm2

Design Temperature : 45O C to +55O C

Mangla Steel is engaged in manufacturing and supplying of wide range of Liquid CO2 Storage tanks with capacity varies from 1 M3 to 150 M3 used in CO2 recovery plants, filling plants and other industrial applications at reasonable price. These Co2 storage tanks can be PUF (Polyurethane Foam) or Vaccum Insulated depending upon the specific application and frequency of usage.  CO2 storage tanks are available both in Horizontal as well as vertical arrangements depending on the space available and the customer’s need keeping in view the norms of SMPV(U) Rules 1981.   We carry out Mechanical Design Calculations and prepare the Fabrication Drawings get it certified by reputed international Third party inspection agency like DNV, BV, SGS, and MECLEC and finally approved by CCOE, Nagpur  in accordance with the provisions of SMPV(U) Rules 1981. Almost care is taken for the quality of raw material and it is confirmed that the material should be Impact tested at -46⁰C. Finally, the liquid storage tanks are equipped with various control devices such as Valves, Safety valves, Pressure gauge, Piping Arrangement, Pumping facility, Chiller/Refrigeration Unit as required by the customer. We undertake complete Design, Material Procurement, Supply, Fabrication, Erection, Inspection, Testing & Commissioning of Liquid Co2 Storage and transport tanks.   Our range of Liquid CO2 Storage Tanks includes:   Horizontal Carbon Dioxide Storage Tank(Up to 150 M3) Vertical Carbon Dioxide Storage Tank(Up to 50 M3) Skid mounted Portable Carbon Dioxide Storage Tank(1-2 M3)    Technical Specification:   Design Code: IS 2825, ASME Section VIII Div.1, ASME Section VIII Div.2, PD 5500 Design Pressure: 24-28 Kg/Cm2 Design Temperature: -45O C to +55O C   Salient Features:   Manufactured from low temperature material (Impact tested at-460C) Differential pressure liquid level indicator to indicate liquid level in mm WC. A corresponding chart is provided to determine the tentative quantity of liquid in Kgs Optional Load cell weighing system to get accurate quantity of liquid in Kgs Two nos. of safety valves as per CCOE norms to discharge excessive pressure with sufficient orifice area Ergonomic designed piping layout for ease of access, operation & maintenance Customized filling and delivery connections Refrigeration auto control cooling unit to maintain the temperature inside the tank (Optional) 200 mm thick PUF Insulation with 20 gauge aluminum sheet cladding     LIQUID CO2 TRANSPORT TANK  :    Mangla Steel also offers Liquid CO2 Transporter Tankers widely used for transportation of Liquid CO2 from one place to another. These tanks are provided with 200 mm thick PUF Insulation to avoid evaporation and are fitted with flanges, safety fitting, pump and other accessories at the back inside the lockable cabin as per the CCOE norms. We also provide Liquid Reciprocating pump of required capacity along with the tank to facilitate the filling of tank. All documentations are provided to take the necessary approvals from CCOE and Road Transport

Diesel Storage Tank, Conference Room Acoustic, Acoustic Baffles

Fuel Storage Tank, fertilizer tanks, surge tank, Mobile Storage Compactor

flexible water tank, Pipes Fittings, Hand Pumps, electric fitting

Diesel Storage Tank, gi duct, Sound Proof Cabins, Sound Proof Canopy

Lpg Storage Tank, liquid nitrogen storage tank, nitrogen gas storage tank

Lpg Storage Tanks, LPG Storage System, lpg bottling plants

Diesel Tank, Generator Silencer

Industrial Storage Tank, Steel Water Storage Tank, Water Tank

Co2 Storage Tank, Atmospheric Vaporizer, Vapour Condensing Unit

Diesel Tank