Stainless Steel Bag Filter Housings
60,000 - 4,000,000 Per Piece
1 Piece (MOQ)
Bag Filters and basket strainers, Filter Bags are desigend to customer technical data . The flow starts from 5m3/hr to 200m3/hr. Made out of MS /SS 304/ SS 316 etc , These filters are suitable for Liquid filtration to the extent of 1 micron.
PP Bag Filter Housing
850 - 1,250 Per piece
2 Piece (MOQ)
Best Deals from Filter Assembly
Air Filter Assembly
Get Price Quote
1 Piece (MOQ)
Fan Filter Unit
16,000 Per Piece
50 Piece (MOQ)
Automatic Reverse Pulse- Jet Bag Filter Unit
Get Price Quote
Dirty gas enters from the bottom of the bag filter unit and flows upwards through the filter bags. The metal cage prevents collapse of the bag. Dust particles filtered and settled at the outer peripheral of the filter tube. Bags are cleaned by a reverse jet of compressed air, injected through nozzle just above the bag holding plate nearer to filter bags. A venturi nozzle provided at the filter bag opening accelerates the compressed air. Since the duration of compressed air jet short time, the filter tube become balloon for short time. This expansion of filter bag for short time of remove the dust cake formation and the dislodged dust falls into a storage hopper below. Reverse-pulse-jet dust collectors can be operated continuously and cleaned without interruption of flow because the burst of compressed air is very small compared with the total volume of dusty air through the collector. Also, the continuous-cleaning feature allows them to operate at higher air-to-cloth ratios, so the space requirements are lower. This cleaning mechanism works with the help of digital sequential timer attached to the fabric filter. This timer indicates the solenoid valve to inject the air to the blow pipe. Automatic Reverse Pulse Jet Bag filter unit, generally have the following parts: Non woven filter fabric bags or high efficiency filter cartridges Strong raw gas chamber in steel Clean air/gas chamber mounted immediately on top of raw gas chamber. Air Jet manifolds is connected to a compressed air tank and solenoid valve assemblies complete with solenoid valves and electronic sequential timers. Inspection cover/doors, hand rails and cat ladder. Special features of the Pulse Jet Bag Filter Easy accessibility to all the components. Inspection and maintenance of filter bags can be carried out entirely from the clean airside. Space saving due to high air to cloth ratio. High filtration efficiency limiting emission level. Low compressed air consumption combined with high cleaning efficiency. High reliability of service since only a few components of simple design are involved. Maintenance free operation. Recovery of particulate matter from exhaust gas is vital for any industry from three aspect To ensure the operators health and safety by removing the hazardous fumes from the working area. To avoid pollution problems. Sturdy construction. To increase the product quality removing fumes from the process. Dust collection systems is used in many processes to either recover valuable granular solid or powder from process streams, or to remove granular solid pollutants from exhaust gases prior to venting to the atmosphere. Dust collection is an online process for collecting any process-generated dust from the source point on a continuous basis. Dust collectors may be of single unit construction, or a collection of devices used to separate particulate matter from the process air. They are often used as an air pollution control device to maintain or improve air quality. The dust generation in manufacturing process directly effects the operator’s health, can contaminate the product which is being manufacturing can make highly uncomfortable for the people in & around the dust generating areas. wish to offer a solution by incorporating dust control & extraction system & ensure a safe & pure zone for the occupants. This process involves exhaust blowers, exhaust air duct work and dust collection hoods to pick up dust particles at the point of generation. In several cases, the dust collected by the system from the point of generation is routed through a filter unit which collects the dust & pure air will be exhausted to the ambient to meet pollution control.
Fan Filter Unit
Get Price Quote
We are the leading Manufacturers, Suppliers and Exporters of Fan Filter Units. As the needs or uses change in a facility our Fan Filter Units (FFU) can exchanged with lay- in rights or blank panels. For facilities with lower classification, upgrades can be obtained by simply adding additional FFU�S. Our Fan Filter Units are fully salvageable as stand alone units. Features Easy to install Superior Quality Economical Highly Effective Filter Fan Units made by Nicotra Gebhardt are available as standard or customised versions for standard and customised ceiling grids for different filter and grid sizes as top load or bottom load versions for liquid or gasket seal systems for various air flows and pressure drops with minimal vibration and audible noise emissions with an external rotor motor system speed variation via BUS or supply voltage for various control systems HEPA Filter A sealed, separatorless mini-pleat filter wih anodized aluminum cell sides, minimum DOP efficiency of 99.99% @ 0.3 microns. Electrical Standard connection to terminal strip in external junction box.
Fuel Filter Housing Assembly
750 Per Piece
1 Piece (MOQ)
We have fuel filter housing assemblies for all vehicles.
Fan Filter Unit
68,000 Per Piece
1 Piece (MOQ)
Fan Filter Units direct a vertical laminar flow of filtered air downward through the enclosed cleanroom area. Each includes a 1100 CFM impeller blower (rated at 90 FPM with filter load) mounted in an MS housing with a plenum design that ensures ample air velocity across the entire face of the filter. A HEPA (high efficiency particulate air) filter installed inside the housing is rated 99.99% efficient at 0.3um particles. The filtration medium consists of micro porous polyurethane mini-pleats held in place by strong, rigid plastic separators that keep the medium from nesting. This design channels airflow with optimal efficiency to reduce resistance. The filter is sealed into the sturdy powder-coated steel frame with a fire-retardant, non-outgassing adhesive. Power to the Fan Filter Units is controlled by a master ON/OFF switch located on the cleanroom control panel. All 120VAC units and 220VAC, 60Hz units are UL listed. CE-marked models are available for 220VAC, 50Hz operations.
SS Bag Filter Assembly
25,000 Per 2000 Piece
1 Piece(s) (MOQ)
Pharmaceutical Filtration Unit
20,000 Per Set
01 Set(s) (MOQ)
Mechanical Belt Filter Press Unit
Get Price Quote
1 Piece (MOQ)
Belt filter press It is intended for mechanical dewatering of wastewater sludge, water conditioning sludge, and industrial slimes. It features a rollers system installed on the frame, between which two endless belts are stretched and connected into continuous ducts. Two belt flushing assemblies, sludge feeder and distributor, and filter cake removal devices are provided with the filter press. Belt thickener It is intended for mechanical dewatering, conditioning, and purifying wastewater sludge and industrial slime. It features a strained, endless sieve belt with an installed ripper system. After dewatering in belt thickener, the sludge moisture can be reduced from 98-99% to 90-96% It is optimal for wastewater with pH 6.0 – 9.0. Belt filter press combi units In this system, the belt thickener is installed onto the frame of the belt filter press. It features the belt filter press PL series and belt thickener SG mounted on it. The dewatered sludge in the belt filter press is treated with a polymer; however, in belt filter press combi units, after polymer treatment, sludge is fed into the top of the unit, on belt thickener. Here, preliminary sludge dewatering is done under gravity. Finally, the sludge is supplied to filter press gravity dewatering zone. The dewatering capacity can be increased with the belt filter press combi units. Advantages Compact equipment. Best suitable for sludge with initial moisture of more than 97.5%. It lengthens the gravity dewatering zone. Low polymer consumption. High corrosion resistance. Cost-efficient. It is reliable because of the high-quality components in the equipment. High efficiency of sludge thickening due to a special system of rippers. Automated control system Certified spare parts and accessories
Filtration Assembly
Get Price Quote
1 Piece (MOQ)
SIS – 1326 Specifications Filtration assembly consisting of S.S. Filter Holder support for 47 mm dia. And Borosil Glass filtration flask, capacity (1Ltr.), vacuum Pipe, Oil Free Vacuum Pump
Filter Assembly
1,300 Per Piece
100 Piece (MOQ)
We have housed variety of air filters, industrial air filters and industrial liquid filters which are widely used in air ventilation systems and automobile industries. We as manufacturer and exporter of air filters and synthetic air filter have won many appreciations. These air filters can be availed at market leading prices.
Stainless Steel Bag Filter Housings
Get Price Quote
1 Unit (MOQ)
Membrane Filtration Assembly
Get Price Quote
We are offering membrane filtration assembly with joint. pioneer scientific instrument corporation piscotm : providing vacuum filtration of tissue culture media, components, biological fluids, hplc and other aqueous solutions. Filter units contain an integrally sealed fritted glass support bed (perfectly ground to match a funnel) for holding a 25 mm. 37 mm. 47 mm. Dia. Filter membrane (not suitable for ceramic membranes). The unit is designed to maximize flow and reduce foaming and protein denaturation. The filter funnel support bed and receiver flask are fitted with interchangeable ground joint and one aluminum clamp is provided to hold the filter funnel and support bed properly. sizes availablefunnel capacityto hold a membrane of35 50 ml25 37 mm300 ml47 mm
PP Bag Filter Assembly
Get Price Quote
Features : Dynamic Large O-Ring Seal Compression Bag Sealing Surface Knife Edge Sealing Micron Rating 1 To 200 All Polypropylene Construction Positive Sealing of Different Bag Thickness
Exhaust Fan Filter Unit
Get Price Quote
We are the right place for you, if seeking for the Exhaust Fan Filter Units of the superlative quality with the rational price tags. Our name figures amid the top entities engaged in the manufacturing and supplying of the Exhaust Fan Filter Unit in India. Our deft team puts painstaking efforts to construct the Exhaust Fan Filter Units that are flawless in construction & performance. Highlights Our Exhaust Fan Filter units are designed to remove micro contaminants generated inside a clean room. This reverse flow fan filter units are ideal for rooms where powders, aerosols, or fine dust is generated. The Ext HEPA Filter safely removes micro-contaminants down to 0.3 microns from the air exhausted from the clean Room. The perfect way to contain a potential environmental contaminant
Air Filter Assembly
Get Price Quote
Our company is identified as one of the celebrated Air Filter Assembly Exporters from India. The Engine Air Filter Assembly offered by us includes Filter Assly Air, Case Air Filter, Pin Cotter, Element Air Filter, Air Filter Kit, Band - Tool Kit, Flanged Bolt (Battery), Screw (Mounting Air Filter), Washer (Nylon), Band (Battery), Damper Battery, Tube Oil Drain and Clamp. Additionally, customers are eased with the availability of the branded Automotive Air Filter Assembly at the most affordable prices.
Fan Filter Unit
36,000 - 45,000 Per piece
1 piece (MOQ)
Filter Element
Get Price Quote
5 Piece(s) (MOQ)
The highest quality spillback lance fittings are offered by us. We are a prominent manufacturer and supplier of these accessories. Our spillback lance fittings are manufactured by the latest technology using the finest quality raw materials. These spillback lance fittings are available in different designs, sizes and shapes at affordable rates. to enquire about the desired product(s), just check the box and then click “inquiry now” button which is provided below.
