Concrete Admixtures Dealers in Exhibition Road, Patna (3 products available)

PLASTO-N341 is used wherever high quality structural concrete is required. Its plasticising effect is particularly useful where : Exposed surfaces are important Maximum performance is desired Placing conditions are difficult. Poor quality aggegates are found Pre-cast elements are produced Piling AdvantagesPLASTO-N341 provides the following beneficial properties : Improved workability without increased water Reduced water without loss of workability Increased strength/durability Cement saving/economy Improvedd surface finish Unaffected setting times Reduced shrinkage and creep Chloride free – does not attack reinforcement Upto 10-12% water reduction is possible Appearance : Dark brown liquid Chemical Base :  Sulphonate Packaging : PLASTO-N341 is available in 230kg Non Returnable Drums.Storage & Shelf Life12 months from date of production if stored properly in undamaged unopened, original sealed packaging, in day conditions at temperatures between  +5oC and +25oC. Protect from direct sunlight and frost.Dosage0.2 to 0.8% by weight of cement. For more demanding situations use 0.5%. PLASTO-N341 is compatible with all types of portland cement including Sulphate Resistant Cement (SRC). Actual dosage to be finalised on the basis of site trials.Application Conditions Instructions for usePLASTO-N341 should be dispensed directly into the mixing water prior to its addition to the wet concrete. When accidental overdosing occurs,  PLASTO-N341 does not entrain excessive amount  of air and does not effect the ultimate strength, only the setting time is extended.Important NotesWhen accidental overdosing of normal setting  SWRR -381 occure the setting time will be retarded. During this period the concrete must be kept moist to prevent premature drying out.Other products categories available.

Description S2-305 is made under the management of competent experts by consuming the finest grade component according to the market norms. S2-305 is plasticising accelerator for cement concrete and mortars Uses: S2-305 is an accelerator suitable for dry as well as wet spray applications. It is used for the following main applications : • S2-305 is of special use in guniting and shot-creting as its accelerated setting times help in quick rebuilding of mortar layers without colla-pse • Rebound losses in shot-creting and guniting are minimized • Early shifting of the pre-cast elements is facilitated • In pre-cast hollow solid blocks, pavers, cement tiles, breaking of the edges while lifting the moulds is minimized • S2-305 helps in early setting of mortars and concrete in low temperature climates Advantages Following arguments specially distinguish S2-305 as catalyser of spraying concrete : • Free from alkali • Good long term strength and durability • In case of proper application, minimum loss of solidity of the catalysed concrete • Reduction of rebound • Improved adhesion of the sprayed concrete on rock and concrete • Improved adhesion in the over head crown portion • Clear reduction of dust and a good working environment • Free from chloride and does not attack reinforcement

Sika Mix Plus Mortar Plasticizer, Sika Waterproofing Chemical