Analytical Instruments Dealers in Paud Road, Pune (12 products available)

EXHAUST GAS ANAL YSERS 8020 . 8040 sampling probe length: 6 m Warm Up: Automatic [maximum warm up time: 5 minutes) Mains Voltage: 187 + 264 Vac Mains Frequency: 50 Hz [::t2%) Power Consumption: 150 W max Mains Fuses: 2xT4 A ENVIRONMENTAL OPERATING CONDITIONS: Operating Temperature: 5 + 40°C Relative Humidity:

We are offering power quality analyzer voltage and current thd, current tdd and k-factor, up to 50th order harmonic, true rms measurement with 128 samplescycle, en50160 compliance statistics, harmonic survey statistics, ieee519 & ieee 1159 measurement compliance, iec 61000 flicker, cbemaitic, iec 6100-4-7 harmonics, tou energy measurement, standard rs-485 communication port and an additional plug-in rs-232rs-422rs-485, ethernet, profibus, gprs module, true rms volts, amps, power, power factor, neutral current, frequency, two independent, simultaneous waveform recorders with upto 2000 post fault cycles 5060400 hz measurement capabilities, class 0.2s iec 62053-22 four-quadrant active and reactive energy meter, three-phase total and per phase energy measurements; active, reactive and apparent energy counters, real-time waveform monitoring capability, add on tou, rtc, dido modules.

Measuring Range : 0-14 pH (4-20mA)

Output :  4-20mA (scalable to 0-14 pH),500 Ω at 24 V DC

Operating Temperature : -25 to 70 Degrees C

Accuracy : ±.02pH (±2mV)

Input :  pH electrode with BNC connector, Solution ground

Power Requirement : 12-24 V DC

Temperature Compensation : Automatic

Repeatability : ±.01 pH (±1mV)

Linearity : 0.1% of Span

The P-420 (encapsulated PH Transmitter) is a 2-wire, 4-20 mA PH transmitter having encapsulated construction, High performance and compact size. It can be interfaced with any display and control devices requiring a 4-20 mA input.Transmitter accepts input from any PH combination electrode through BNC Connector. It transforms the PH signal to a 4-20 mA Current proportional to the PH level 4-20 Output from PH transmitter can be transmitted over two wires to control device. Same two wires used to suppy power to loop.Any 12-24 VDC Power supply can be used. There are two adjustments on transmitter to standardize probes for "ASY" and "SLP".Features:• 4-20 mA Loop Powered•  Easy To Use• Compact Size• Adjustable ASY and SLP

flash chromatography systems, spe cartridges, Specialty Chemical, catalysts

Quantum magnetic resonance analyzer It contains quantum analyzer and Low frequency physiotherapy functions, and Low frequency physiotherapy functions contains the slipper and paster functions( Also known as TENS Therapy ). So it contains Quantum analyzer, Slipper functions, Paster functions.

Feature : Accuracy and Reliability

Brand Name : N. P. Electronics

Condition : Good

Product Name : Gas Analyzer

Variety : Gas analyzer 8050, exhaust gas analyzer 8020, portable gas analyzer etc.

Place Of Origin : Pune,Maharasthra

We manufacture various types of Gas Analyzer which includes gas analyzer 8050, exhaust gas analyzer 8020, portable gas analyzer etc. Our gas analyzers are equipped with various superior features, thus increasing the accuracy and reliability of the analyzer. The gas analyzers which we manufacture are provided with an automatic warm-up facility and also with a back up battery. We provide gas analyzers at the most reasonable rates.

Our advanced packaging system assists us in meeting the bulk and customized packaging requirements of the clients. In addition, our packing experts ensure safe packaging of the products. Our team makes it possible to carry out online transactions, keeping the details confidential. Our payment procedures and the transactions we make are completely transparent and thus, clients can trust on us.

The thermal analysis is a quick, reliable, & low cost application method enabling quality & melting process control of cast iron. From ironcarbon state diagram the thermal analysis gives direct information about solidification of cast iron. It allows analysis of carbon equivalent (%CE), Carbon (%C), Silicon (%Si) in iron melts like Grey cast iron, Ductile iron and Malleable iron. Principal of Operation: Thermal Analysis is the interpretation of cooling curve of liquid iron sample. First arrest point, the liquidus is a temperature level is directly related to Carbon Equivalent. CE = %C + %Si3 + %P3. Second arrest point, the solidus temperature, when referred with liquidus, allows the total carbon content prediction. For this; metal must solidify white which is achieved by Tellurium This specially designed Tellurium & other ingredient minimises the influence of entrapped particles, gases and particularly additions used in cupola produced iron. Our smart carbon cups are tellurium coated sensors with "k" type thermocouple can be used for Carbon Equivalent, % Carbon, % silicon in grey, malleable & base metal of ductile iron. Carbon cups are available to cover entire range of thermal analysis i.e. % Carbon + % Silicon9 = 4.3.

Wetted Parts : Body ‐ Glass Housing – Std PVC (Optional – Teflon/SS316) Cap – Std PVC (Optional – Teflon/SS316)

Process Connection : 3/4" bsp (NPT optional)

ATC (optional) : External Pt100 (Pt1000 optional)

Temperature Range : 0 – 600C (Optional upto 1300C – with Teflon/SS316)

Pressure Range : 0 – 6 bar Std

Sensor Cable : 3 meter Std

Cable Connector : BNC

Range : 00.00 – 14.00

The sensor shall have these important enhanced performance design characteristics: Manufactured to exact tolerances using high quality, rugged materials. Individually tested to determine its absolute highest possible measuring accuracy. External Pt100 [Pt 1000 optional] RTD temperature element for exceptionally fast response to changes in Temperature with ± 0.10C accuracy.   Applications: Food Industry Pharmaceutical High purity water Reverse Osmosis Plants Waste treatment Plants, and other processes Heavy duty electrodes for boiler applications

metal analyzers

foundry analytical instrument, Electronic Instruments, molten metal equipment