Aqua Clean Systems Talawade, Pune, Maharashtra

• Surface treatment washers, Pre treatment washing machines, Surface treatment washing machines, are used to clean and treat the metal surface prior to painting process. • They are provided with single chamber multi process systems ( box type spray treatment ) for batch type and also in multistage configurations. • These washers are provided with various heating modes. viz. Electrical, hot water generator or gas fired heating to suit customer's requirement. • Multi - tier filtration along with oil removal system is provided to enhance the bath life. • They can be integrated with the paint line for further processes.

We are involved in providing varied types of Special Purpose Cleaning & Washing Machines. • Auto Parts Cleaning & Washing Machines • Casting Parts Cleaning Machines • Cylinder Block Washing & Cleaning Machines • General Purpose Industrial Washing Machines • High Pressure Cleaning Machines • Flushing Equipment Machines • Trolley In Out Washers • Industrial Bin Washing Machines • Drum Washers • Spray Washers • Crate Washing & Cleaning Machines • Bin / Tray Washing Machines • Crank Case Cleaning Machines

  Spares and Service • Filtration Systems• Oil Separators• Mist Separator • Auto Dosing   Filtration of Cleaning Liquids Clean components being the objective of cleaning machine, filtration of cleaning fluid is the key and affects consistency of the machine, we at Aqua Clean Systemsuse the best of technology available for better performance of the cleaning machine. A better filtration system gives longevity to bath solution, consistent cleanliness values and better machine life with low cost operation. Cleaning fluids are often chemically active. This calls for a wise selection of filtration materials. Water based alkaline chemicals are used to saponify the oils on components. For filtration of these, SS meshes; man-made fiber felts etc. are used. To have control over the size or quantum of dirt coming in the parts washers, it is necessary to add some features that reduce the load on the filters. Following are some of the peripherals that are used for this purpose.   • Basket Strainers / Chip tray : These can conveniently handle large size of chips. Need manual cleaning   • Bag Type Filters : If coarse dirt is to be collected, a mesh type bag is used. For low flows and fine filtration requirements polyester felt bags are proposed. These are provided in simplex or duplex type housings with disposable filter bags.   • Self Cleaning Filters : During the filtration, suspended particles accumulate inside the filter element. Based on preset differential pressure or preset timer the drain open to discharge the slurry containing solid particles. A pair of rotating brush continuously cleans the filtering surface.   • Compact Paper band filter : • These are automatic and compact design giving high filtration efficiency. These are suitable for high flow rate and dirt content and   low operating cost.   • Magnetic Separators : Helps in removal of ferrous material thus giving cleaner wash tank solution. The ferrous material is separated by a magnetic drum and by using simple adjusting scraper blade.   Oil Separators Oil skimmers : Oil skimmers remove floating oils on the storage tank of water based washing fluid, removing some dirt along with it. They are available in disc type and belt type to suit the application.   Oil Coalescers : Oil Coalescers help to separate oil droplets by gravity which is in suspension in the wash tank bath. It withdraws water and oil, separates them and returns the oil-free water, while the oil is collected in a separate container.   Mist Separators : Mist separators are used to extract fumes from the wash chamber for operator comfort and separate the condensate which is returned back to the wash tank thus letting out the fresh air and maintaining the shop floor ambience.   Auto Dosing : These are automatically controlled metering pumps provided for maintaining the concentration of liquids in the tank for critical process and your specific requirement.

Brand Name : ACSPL

Rated Capacity : 100-300 L

Usage : Industrial

Material : Mild Steel

Automation Grade : Automatic

Warranty : 1 Year

Power Source : Electric

• Carrousel Parts Washers, Carrousel Indexing Type Washing Machines, Carousel Spray Washers are suitable for lean manufacturing process. • It allows operator to load and unload the machine from same location and works several machines in a cell simultaneously. • Equipped with rinse and air blow off capabilities, delivers the most flexible, high quality, cleaning action, available today. • The unique indexing table with rotating part fixtures permit full access to the spray jets on the component 100% of the time. • Suitable to process small to medium parts on a continuous basis at high production rates.

• Roto - Flood - Cab - Immersion and Spray washers, Rotary Flood Washers, Rotary Flood Immersion & Spray Type Component Cleaning Machines are developed for precision industries. • It has a smaller foot print and compact design for location in small volume high precision machining cells. • This front load type machine can be incorporated with Ultrasonic cleaning for finer cleaning of parts along with rinsing and drying stage. • Special baskets dedicated to critical parts are provided. • They cater to cleaning requirements of parts that have complex geometries and holes, higher contamination and where productivity, surface finish required is high.

We Deals in rotary drum washer machine • Rotary Table Washing Machines, Rotary Table Type Component Cleaning Machines, Rotary Table Spray Washers, Top Loading Spray Washers are an industrial quality, water based cleaning machine built for tough cleaning needs. • Developed for fast, effective and economical cleaning performance. • Dynamic range of basket sizes - 250mm, 600mm, 800mm, 1000mm and 1300mm diameter. • Multi - tier filtration and oil removal system. • Equipped as standard but also available are various optional extras to bring better cleaning quality benefits, handling and productivity. • Suitable for parts with simple geometry and for low productivity. These Roto - Clean Machines are also available with higher pump pressure, extended tank capacities, and with additional rinsing stage.

• Rotary Table Washing Machines, Rotary Table Type Component Cleaning Machines, Rotary Table Spray Washers, Top Loading Spray Washers are an industrial quality, water based cleaning machine built for tough cleaning needs. • Developed for fast, effective and economical cleaning performance. • Dynamic range of basket sizes - 250mm, 600mm, 800mm, 1000mm and 1300mm diameter. • Multi - tier filtration and oil removal system. • Equipped as standard but also available are various optional extras to bring better cleaning quality benefits, handling and productivity. • Suitable for parts with simple geometry and for low productivity.   These Roto - Clean Machines are also available with higher pump pressure, extended tank capacities, and with additional rinsing stage.

Automation Grade : Automatic

Usage : Industrial

  Dip - Dunk ( top and side loading immersion washer ) • Dunking washers, also known as Dipping & Dunk Component Washing & Cleaning Machines, Immersion & Spray Washers are compact, simplest and most cost - effective cleaning method. • The working principle is based on cleaning the parts by means of a simple and reliable pneumatically / motor operated dunking platform. •  The process cycle is fully automatic and timer controlled for ease in operations. •  Designed to operate at ambient and with temperature controlled hot liquids. • They can be fitted with filtration system and much more as per the process requirement. • Suitable for pre - cleaning of complex shape components, surface treatments, rust preventive application and more.

  • These washers are customised and are designed for cleaning crank case of engines specifically. • It has unique component holding fixture arrangement to facilitate ease in load and unload of parts. • Machine facilitates superior cleaning action by using multiple manifolds and nozzles. • Rotation arrangement ensures quick dripping of solution and external cleaning of the crank case. • Regenerative type - high velocity blower offers better drying facility for immediate use of crank case.

Automation Grade : Automatic

Material : Mild Steel

Aqua Clean Systems caters to component cleaning machines and is an entity managed by highly experienced professionals with a wide experience in the field of parts cleaning and surface treatment technology.

• Roto - Cab washers, Cabinet Type Component Washing Machines, Twin Chamber Washing Machines, Rotary Indexing Type Cleaning Machines are ruggedly built cabinet type spray washing machine with rotary table and designed for large size and batch cleaning process, while retaining the cost - effectiveness of the equipment • Available in different trolley / basket size and have loading heights to meet the process requirement. • Roto - Cab WR ( Water Rinse ) spray washers are multi - stage, single chamber design built for automatic washing, rinsing followed by drying operation. • Programmable control panel with human machine interface ( HMI ) • Suitable for medium to large parts, machined bodies and batch type production.