Automotive Components Dealers in Pimpri Chinchwad, Pune (112 products available)

Flexible polythelene material rendered antistatic by the use of special anti static agents the surface resistivity is maintained below 1010 ohms per square. These bags are made from tubes of standard widths. The standard thickness of the bag is 0. 1mm (100microns). Bags can be easily heat sealed to protect the contents within. Each bag carries a standard caution message. Additional user messages, monograms can be printed on request.Air Bubble Bags are also available.

• Wetted Parts: Anodized Aluminium
• Flange: Aluminium or MS
• Enclosure: Aluminium or Plastic
• Probe Length: 150mm to 2000mm
• Input: 12 to 24V DC
• Output: 4-20mA, 0-5V, 0-10V, RS485 0/P
• Connection: 3 core cable l mt

Fuel level sensoris a low cost capacitance type level sensor. It is designed for monitoring levels in fuel tanks of vehicles, Bulk storage tanks fitted on vehicles, diesel storage tanks. The Design is simple & light weight. It measures the level accurately and reliably. The sensor output is connected to vehicle monitoring and tracking system or level indicators. The sensor consists of measuring probe which is encircled with a reference probe. This given more linear output and is not affected by turbulence inside the tank. Fuel Level Sensor As the fuel level increases, the capacitance value also increases. The fuel acts as the dielectric between electrodes. The increase in capacitance directly proportional to increase in fuel level. This change in capacitance is measured and converted into 4-20mA, 0-5V, 0-10V, RS485 O/P.

• Detection Angle: 180 Degree
• Detection Distance: 6 meter
• Power Source: 220-240 V AC
• Application: Cabinets and Closets
• Ambient Light: < 3- 2000 LUX
• Time Delay: 30 Min
• Rated Load: 300-500 W

• Application: - Automotive industry, Specialty vehicle

We offer Silicone Rubber Products. These masks are in demand and widely used in various industries. We manufacture these silicone rubber products with 100% silicone material. These products has been designed as per the predefined standards and availed by the customers at most comprehensive and market leading price range.

Manwani machines Pvt Ltd. offers hydraulic press brake. It is mainly useful for bending metal sheets and plates. These tools are made using top grade materials. We provide technically superior and perfectly engineered instruments. They consume less electricity and need minimum maintenance. These tools include features such as better precision, higher speed and least wear and tear. Our tough and long lasting hydraulic brake press are simple to operate and noise and vibration free. We supply many models of this, as per our client’s requirements and widely used in several industries Manwani machines Pvt Ltd. is a popular machine manufacturer and supplier. We design variety of workshop machinery suitable for complete range of engineering, wood work and automobile engineering industries. We pick the competitive requirements of customers and consider the same to create tools with user friendly features. Press Brakes play a strong role in bending metal sheets. We supply that suits for cost effective, efficient and power saving machining operations. Our device is precise in bending operation, comparatively high speed than conventional press. All the tool ingredients are made of durable and rigid material that keeps up the equipment support for long term production. These tools are applicable in majority for sheet bending and folding activities which is done with the additional die. Engineering industries which has special machining requirements on metal sheets can find reliable metal work with the help of this tool. In addition, the hydraulic principle supports for specialized sheet bending applications even when the production requirements remain continuous.   Features   The Stable robust welded steel frame made of ultrasonically tested IS 2062 plates as per guidelines of IMTMA Standards. Fast approach & fast return speed to save cycle time, slow pressing speed for better stroke control & bending accuracy, ensures high productivity. Compact Cylinders & low pressure system due to rear cylinders. Better rigidity & load carrying capacity against fatigue failure. Positive synchronisation of cylinders with welded torque tube. Moving work station with ON/OFF Controls, Emergency push button & selector for Manual, Semi-Auto & Automatic mode for easy operation & Safety. Better Safety for operator & machine. Low power consumption. NC upgradation available. Low Noise & Smooth Operation give higher efficiency of operator.

• Material: Plastic
• Weight: 50 - 400 gm
• Warranty: 6 Month
• Color: Black

Wiper Module Wiper Intermittent, Low, High Speed Front and Rear Washer / Wiper Function Light Module Left Turn Indicator and Lane Changer Right Turn Indicator and Lane Changer High Beam, Low Beam and Day Time & Night Time Passing Front Fog and/or Rear Fog Auto Cancellation of Turn Indicator Switch

• Material: SS OR SPRING STEEL
• Application: FOR HEADLAMP AND SILICON RUBBER HOSE
• Structure: AS PER REQUIREMENT
• Model Number: HEAD LAMP SPRINGS
• Style: MANUAL & CNC
• Place of Origin: PUNE

head lamp spring & rubber hose rings torsion spring coil springs and many others as per requirement float springs wire clamps ,made manually and with cnc S P MAX ENTERPRISES (SPRING MANUFACTURERS) 9371021151

• Powder coated white: White and Green

1. User can switch ON/OFF the motor from anywhere in the world by any cell phone 2. User can set specific time to ON/OFF the motor 3. Protects motor from running dry 4. Protection against Phase fault, Phase reverse and voltage unbalance 5. Feedback to user of Electricity availability, Dry run, Phase fault, Starter fault or any Technical fault 6. Tracking system 7. User can register 10 Mobile numbers to operate the system

Dunnage Air Bags, Lashing Belts, Composite Strap

As our payment methods are practical and convenient, we are highly recommended by the clients. We provide option to pay in cash as well as through bank transfer. We make sure that all our products are in compliance with the industry standards and thus cross checked at all stages including manufacturing, warehousing, packaging and final dispatch.

We entered in to manufacturing of Precision Pressure Die - cast & Turned Components for Automotive & Non - Automotive applications such as Alternator & Starter Motor Cover & Brackets, Canister & Bracket for Shock absorber, Master Cylinder Piston & Caliper Piston for Brake system, parts for computer hard wear

The precision repeatability performance of these machines is achieved by synchronizing the hydraulic cylinders with the use of advanced proportional valve control, With automatic indexing of the axes at the start of running process, calibration is provided, 4 Data inputs of material thickness, type and length through a user friendly software enables the control to calculate and provide the following: Determination of bending power required for each stroke, Graphical display of the unfolding of bending parts, Positioning of the back gauge for each step of the bending program, Determination of the most practical bending sequence An automatic calculation of top beam stroke for bending angle, Adaptation condition of tools and work pieces, Graphical display of potential interferences between material, tools and the machine, Storage of programs with alpha-numerical names and recalling, Programmable bending speeds, Manuel, semi-automatic or automatic working modes. Upper beam tilting for conical bending.

We are engaged in the manufacture and supply of premium-quality Anti Vibration Mountings. They are made using premium-quality rubber at our advanced infrastructure facility. They are made using the latest equipments and techniques and comply with industrial quality standards. These mountings are used for different industrial purposes. They are renowned for not causing any vibration and absorbing impacts. They are highly acclaimed for their sturdy designs and damage-resistant features. Their resistance to temperature and moisture enables them to last for long time durations. They dry quickly and are suitable for rugged use. They are tested by quality auditors before dispatch to ensure client satisfaction with the product. We supply them to our clients at reasonable prices within the specified time-period. They are easy to install and maintain.

We are engaged in supplying of connection silencer.

• Features: Longer life, Excellent finish ,Superb design, Fine quality

We are the leading exporter and supplier of this products.

Automotive Sensors, Speed Sensors, Sensors, proximity, Pressure Sensors

jaya hind has made a name for itself in transmission segment by manufacturing close to 1 million transmission parts per year. this includes gear box housings, clutch housings for manual and auto-transmission. the product range includes transmission housings from 2 - 25 kg weight for variety of vehicle segments like 3 wheelers, passenger cars, suvs, light commercial vehicles and heavy commercial vehicles. transmission housings are supplied in "as cast" and "fully machined" condition to domestic and global customers.

• Country of Origin: India
• Type: Car Brakes
• Material: Iron, Metal, Mild Steel
• Shape: C Shape
• Thickness: 0-3mm, 3-5mm, 5-7mm
• Operational temperature range →: -10oC to +40oC

This model is a high-performance slim-type brake with the same basic design with the clutch. Due to its excellent responsiveness, it works effectively for a quick stop of loads. The optimum condition can be selected from the three types of armature assemblies with different mounting forms.

We are leading manufacturer and supplier of disc brakes

generators silencer, pump sets silencer, Fuel Tank

gear case timing cover, drop box

• Color: Blue
• Country of Origin: Made in India
• Tensile Strength: 2.4,5.5 MPa
• Relative Density: 1.10 - 1.50 g/cm3
•  :  

• Material: Paper
• Color: Brown And White
• Brand Name: Sai packaging
• Size/Dimension: 900x1800 mm
• Air Tight: Yes
• Usage/Application: Transport Loading Securing
• I Deal In: New Only
• Available Sizes: 900*1200, 900*1800, 900*1500, 900*2100,1200*1800

• Feature: Heat resistant, Easy installation, Precise dimensions

industrial rubber, Rubber Product

Auto Silencer, Sheet Metal Parts, tubular parts, surge tanks

Automotive Products, Agricultural Products, Printed Packaging Box

car muffler, Alpine Tent