Pressure Calibrator
Get Price Quote
10 Piece (MOQ)
LTC Leak Calibrator
Get Price Quote
LTC (Leak Tester Control) instruments are dedicated to check the efficiency of the equipment used for leak testing. Besides the use as pressure calibrators to check and certify the measures of the equipment they can be also used as leak simulators to verify that the test equipment to be able to recognize the leak set in cm3/min or cm3/h. The leak is adjusted by the micro-needle valve in the upper part and measured by the flow sensor inside the instrument . The color display shows, in real time, flow and leak and by simply touching the screen you can activate a micro-valve, provided inside the instrument, which inserts the leak in the circuit test. You can then immediately determine whether the leak tester in verification is able to recognize the simulated leak. Also, always on the color display, you will see a plot of the pressure curve of the circuit under test. This allows you to "see" the progress of the test and then set with extreme precision and simplicity the correct timings for filling, settling and measure parameters. Finally, LTC has USB ports for connecting memory (pendrive) on which to save the data of the tests. 3.5" LCD TFT with touchscreen Portable, battery-powered (Li-Po) Fullscale pressure range: 2 / 6 /10 bar Certifiable in vacuum up to - 0.9 bar Resolution up to 1 Pa (0.01 mbar) Fullscale flow range: 50 cm3/min - resolution 1 cm3 / h (0.01 cm3/min) Digital thermometer Relative humidity sensor
Best Deals from Calibrators
Torque Calibrator
Get Price Quote
We are offering torque calibrator, unit for checking and setting torque wrenches. It is designed for a workshop environment and can be fitted to a wall, steel structure or the end of a bench. It has big easy-to-read led digits with a clever dual-colour torque display, visible in all light conditions and can be switched between nm and lb.ft. Three versions are available to measure torques up to 1000nm and all have traceable calibration.
Universal Calibrator
Get Price Quote
Vibration Calibrator
Get Price Quote
The SV 110 is a hand-held vibration calibrator designed for verification of machine sensors as well as on-site checks of human vibration accelerometers in accordance to ISO 8041. The small size of SV 110 enables easy checks of sensors at the machines. Depending on the selected frequency user may select level of calibration from1 m/s2 to 10 m/s2. Accelerometers are conveniently attached using mounting stud, mounting disc or dedicated adapter. The calibrator menu provides selection between both metric systems ‘g’ and ‘m/s2’. The menu is simply operated by three push-buttons and small OLED display. Features: Hand-held vibration field calibrator designed in accordance to ISO 8041 for in-situ checks of hand-arm vibration metersand machine vibration meters Three push-buttons for selection of frequency and amplitude and start/stop control. The OLED graphical screen displays information on selected frequency and vibrationlevel. Two operating frequencies 80 Hz and 160 Hz Calibration of sensors with mass up to 300 g at 80 Hz. Built-in reference accelerometer for cross-axes / transverse vibration detection. Built-in rechargeable battery. Automatic fault detection: two LED diodes show the current status during the calibration process.
Table Top Calibrator
Get Price Quote
dial gauge calibrator
Get Price Quote
Model-DGCH - 25It's universal design enables it to calibrate both plunger and lever DTI's (Dial Test Indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the Abbe's principle. SPECIFICATIONS : 25 mm travel covering the majority of common indicators Accepts lever indicators with stylus up to 40 mm long Computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8” shank can be tested. Bore gauges up to 150 mm can be checked. The standard Kit incorporates, Cary case ModelDGC-25 calibrator Master gauge (Baker Electronic Dial Gauge ED1) RS 232 cable to transfer output to computer with software Magnifying glass 3/8” to 8 mm stem mounting sleeve. Bore Gauge holding bracket and extension rod. For more details and enquiry please contact.
Process Calibrators
Get Price Quote
Spark Tester Calibrator
Get Price Quote
for spark testing with constant and comparable sensitivity on insulating, winding and sheathing lines, it is very essential to calibrate the spark tester with a spark tester calibrator. kat controls make spark tester calibrator model stcal-2k is designed to meet the requirements of relevant indian and international standards for spark testers. one can measure the test voltage and it’s frequency with the help of spark tester calibrator. incorporating digital voltmeter, this versatile calibrator is used for both voltage calibration and measurement of fault detection sensitivity of various makes and type of spark testers. measurement and display circuits for : test voltages up to 15 kv rms for ac high frequency spark testers 30 kv rms / dc for ac mains frequency / dc spark testers resp test voltage frequency upto 4000 hz .
Air Velocity Calibrator
Get Price Quote
Mini Wind Tunnel including power connection cable: Draw up your own ISO calibration certificates! The Testo Mini Wind Tunnel can be used for regular checks on velocity probes and measuring instruments in your company. 3 speed levels can be set: 2.5/5/10 m/s. These readings are traceable to the PTB standard.Accuracy of wind tunnel is ± 1% of reading (at least 0.1 m/s) plus calibration uncertainty of the respective reference instrument's certificate.
Flow Calibrator Portable Digital T2710
200,000 - 300,000 Per piece
1 Piece (MOQ)
T2710 T2710 is the new digital portable calibrator of ForTest T Series T2710 is the digital portable calibrator for micro flow of ForTest® T-Series. Enclosed in a container of anodized aluminium with shatterproof plexiglass front, we find a completely new circuit board and a mass flow meter sensor, for direct measurement of leaks. Coupled to the micrometer nozzle supplied, they are designed to simulate the desired leakage, facilitating the procedure for programming and verification of leak test instruments. T2710 Standard version has got a lithium ion battery rechargeable that gives it an incredible autonomy and a USB port for PC connection in order to download and manage the taken measures. T2710 uses a mass flow sensor and can detect flow rates up to 200 cc/min with precision and reliability. This portable instrument, of compact dimensions and simple use is essential to check the calibration and the repeatability of measure instruments and of nozzle sample. Applications Fields Calibration control for ForTest® leak test and flow test equipment Calibration control for others leak test and flow test equipment Leak test control of masking system Detection of leakage entity Nozzle control Direct control of correspondence to rules
Universal Calibrator
Get Price Quote
Feature : • Portable Battery & Mains ( 240VAC50Hz) operated • LCD Display • Source and sink for mV, mA, & RTD • Light waight & with carry bag • Direct feed switch for mVmA RTD • Power on switch
Universal Calibrator
Get Price Quote
it is designed to tackle most common trouble-shooting during commissioning and routine maintenance. Model 45-B is truly hand held calibration instrument purposely limited functionally to simplify its use. With all its features 45-B battery operated field calibrator is an essential tool in a service engineer's kit.Potential free PT-100-RTD simulator. Higher accuracy, stability, noise immunity. Calibrated on certified multimeters with national traceability. Free calibration checks facility for five years. Guaranteed certification from authorised institutions like ETDC, ERTL, and IDEMI for specified accuracy. One year warranty.
Calibration Field IR Calibrator
Get Price Quote
Universal Calibrator
Get Price Quote
ESD�s 310 is a portable battery operated calibrator suitable for calibrating field instruments. This can feed as well as measure mV, mA and resistance inputs. These calibrators are characterised by highly stable and precise output.
Battery Operated Universal Calibrator
Get Price Quote
Loop Calibrator
Get Price Quote
KM CAL 700VOLT / mA CALIBRATOR SOURCE & MEASURESKusam Meco Calibrators ACCESSORIES :Double insulation Test Leads , 2 Crocodile Clips, DC 1.5V (AAA) Battery x 6,Carrying Case, User’s Manual. SKU: KMCAL700Category: CalibratorsTags: loop calibrators, calibration instruments, instrument calibrator,km cal 700, Kusam meco calibrators, VOLT / mA CALIBRATOR SOURCE MEASURES
Fluke 725 Multifunction Calibrator
Get Price Quote
The new Fluke 725 Multifunction Process Calibrator is a powerful yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.
Universal Calibrator
Get Price Quote
Universal Calibrator is used for the calibration of many types of Process Control Instruments which accept mV, mA & RTD Input. This can be used as better tool for fault finding & confirmation of instrument sensor reliability, hence extremely useful for Commissioning Activity, Quality Assurance, Routine Maintenance & Trouble Shooting.
dial gauge calibrator
Get Price Quote
BAKER GAUGES INDIA PRIVATE LIMITED is dedicated to the pursuit of excellence in the field of dimensional metrology. We have embodied our wealth of experience and expertise in this fine science of measurement into our Calibration Laboratories, which are equipped with the most reliable and sophisticated world class measuring equipment available and operated under controlled environmental conditions. Our measuring equipment are periodically calibrated by National Physical Laboratory, New Delhi and our masters have National and International traceability.
Battery operated indicator calibrator
Get Price Quote
Model PC-UC-45–B field calibrator is widely used calibration tool in process industry for last two and half decades functionally. Battery operated calibrator is designed to tackle most common trouble-shooting during commissioning and routine maintenance. Battery operated calibrator is truly hand held calibration instrument purposely limited functionality to simplify its use. With all its features 45-B battery operated field calibrator is an essential tool in service engineer’s kit. Features : mV/mA source and sink. Potential free PT100 RTD simulator. Free calibration check facility for 5-Years. Hand held, battery operated. 4.5 digit LCD indication. Higher accuracy, stability, noise immunity. Calibrated on certified multimeters with national traceability.
Universal Calibrator
Get Price Quote
Analogik universal calibrator is very useful tool to calibrate many types of process control instruments which accepts mV and mA and resistance. The universal calibrator is designed to give highest stability and accuracy. The calibrator can be used for lab or inhouse purpose as well as to used on field. This is very useful tool for calibration of instruments, commissioning, quality assurance and fault findings.
Portable Calibrator
Get Price Quote
ESD’s 310 is a portable battery operated calibrator suitable for calibrating field instruments. This can feed as well as measure mV, mA and resistance inputs. These calibrators are characterised by highly stable and precise output.
Hand Held Pressure Calibrator
300,000 Per Number
1 Number (MOQ)
Voltage Calibrator
13,600 Per Piece
1 Piece(s) (MOQ)
dial gauge calibrator
Get Price Quote
it's universal design enables it to calibrate both plunger and lever dti's (dial test indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the abbe's principle. specifications :25 mm travel covering the majority of common indicators accepts lever indicators with stylus up to 40 mm long computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8†shank can be tested. Bore gauges up to 150 mm can be checked. The standard kit incorporates, cary case modeldgc-25 calibrator master gauge (baker electronic dial gauge ed1) rs 232 cable to transfer output to computer with software magnifying glass 3/8†to 8 mm stem mounting sleeve. Bore gauge holding bracket and extension rod. For more details and enquiry please contact.
dial gauge calibrator
Get Price Quote
Calibration of Dial gauges (Plunger & Lever Type) and Bore Gauges Suitable for 0.01 and 0.001 mm least count Interface with computer for DG Cal Software Graphical presentation for errors in both directions
Multifunction Calibrator
Get Price Quote
Presenting Multifunction Calibrators that are of top quality. We are one of the best known and trusted manufacturers, exporters and suppliers of Multifunction Calibrator all over the country. The Multifunction Calibrators manufactured by us are made from superior grade material. Our Multifunction Calibrators serve maximum efficiency, longer equipment life and users safety. These calibrators are available with us at reasonable market prices.
tape and scale calibrator
160,500 - 185,500 Per system
Universal Calibrator
Get Price Quote
Universal Calibrator, Electro Pneumatic Positioner, axial pneumatic valves