Filtek India Pvt. Ltd. Bavdhan Khurd, Pune, Maharashtra

  • Turbine Oil Cleaning System

    Turbine Oil Cleaning System

    150,000 Per onwards

    Brand Name : Filtek

    Voltage : 415 V

    Country of Origin : Made in India

    ...more
    Get Best Price
  • Oil Cleaning Machine

    Oil Cleaning Machine

    Request for Price

    Weight : 126 Kg

    Get Best Price
  • HVAC Compressor Spares

    HVAC Compressor Spares

    Request for Price

    We take this opportunity to introduce HVAC Compressor Spares export to Europe / USA / Far East / Middle East countries.       We deal in spares for Compressors like CARRIER, GRASSO, YORK, DAIKIN, TOYO, TRANE, STALL, SABROE, MYCOM, BITZER and COPELAND etc. We can also offer refurnished / reconditioned compressors of makes like Bock, Copeland, Daikin, Carrier, Grasso etc. of all models. We give unconditional guarantee for all spares we supply. Our spares are directly replaceable in look, dimensions, quality, finish and performance with OEM spares.     Delivery of the above spares can be made to any port/ destination in the world within a short span of time. 

    ...more
    Get Best Price
  • HF Series Hydraulic Filtration Skid

    HF Series Hydraulic Filtration Skid

    Request for Price

    APPLICATIONS MARINE & OFFSHORE OIL RIGS POWER GENERATION CONSTRUCTION & MINING HYDRAULIC EQUIPMENT TRANSMISSION INDUSTRIAL EQUIPMENT   BENEFITS • Safety eliminate oil drain • Reduced frictional wear • Reduced new oil purchases up to 90% • Reduced oil – related maintenance cost • Improved oil circulation • Reduced equipment downtime • Decreased sludge and varnish deposits • Cooler running engines / equipment • Increased engine efficiency • Payback typically in less than one year • Oil disposal problems eliminated • Controlled oil viscosity   HOW IT WORKS: The contaminated oil enters a magnetic conditioner to remove ferrous particles. The oil is pumped through a metering jet to the tightly compressed cellulose fibre filter element, where all solids down to 1 micron and below are captured, while neutralizing acids and sulphur compounds. The filtered oil then enters the heated evaporation chamber, where water particles are evaporated and vented out. The clean oil is then gravity fed back to the

    ...more
    Get Best Price
  • FT600 Centrifugal Oil Cleaner

    FT600 Centrifugal Oil Cleaner

    Request for Price

    BENEFITS Suitable for system capacity over 400 liters. Rotor dirt holding capacity 6 liters. Rotor oil capacity 6.5 liters. Minimum oil feed pipe size 19mm internal diameter. Minimum oil drain pipe size 76mm internal diameter. Oil inlet threads and Cut Off Valve ( C.O.V. ) ratings can be tailored to suit customer requirements. Rotor disassembly tool is required to service thise product The net weight of the FT600 is 25kg.

    ...more
    Get Best Price
  • FT400 Centrifugal Oil Cleaner

    FT400 Centrifugal Oil Cleaner

    Request for Price

    BENEFITS Suitable for oil sump 400 to 1000 liters. Rotor dirt holding capacity 4 liters. Rotor oil capacity 4.5 liters. Minimum oil feed pipe size 19mm internal diameter. Minimum oil drain pipe size 76mm internal diameter. Oil inlet threads and Cut Off Valve ( C.O.V. ) ratings can be tailored to suit customer requirements. The net weight of the FT400 is 22kg.

    ...more
    Get Best Price
  • FT200 Centrifugal Oil Cleaner

    FT200 Centrifugal Oil Cleaner

    Request for Price

    BENEFIT Suitable for system capacity from 100 to 400 liters Rotor dirt holding capacity 2 liters Rotor oil capacity 2.3 liters Minimum oil feed pipe size 12mm internal diameter Minimum oil drain pipe size 50mm internal diameter Oil inlet threads and Cut Off Valve ( C.O.V. ) ratings can be tailored to suit customer requirements The net weight of the FT200 is 9.5kg.

    ...more
    Get Best Price
  • FT060 Centrifugal Oil Cleaner

    FT060 Centrifugal Oil Cleaner

    Request for Price

    BENEFITS Suitable for system capacity from 25 to 90 liters Rotor dirt capacity 0.6 liters Rotor oil capacity 0.75 liters Minimum oil feed pipe size 9.5mm internal diameter Minimum oil drain pipe size 38mm internal diameter Available with or without Cut Off Valve ( C.O.V. ) The net weight of the FT060 is 3kg.

    ...more
    Get Best Price
  • FT025 Centrifugal Oil Cleaner

    FT025 Centrifugal Oil Cleaner

    Request for Price

    BENEFIT Suitable for system capacity from 15 to 25 liters Rotor dirt capacity 0.25 liters Rotor oil capacity 0.32 liters Minimum oil feed pipe size 6mm internal diameter Minimum oil drain pipe size 25mm internal diameter Available with or without Cut Off Valve ( C.O.V. ) The net weight of the FT025 is 1.4kg.

    ...more
    Get Best Price
  • FT020 Centrifugal Oil Cleaner

    FT020 Centrifugal Oil Cleaner

    Request for Price

    BENEFITS Suitable for system capacity from 8 to 15 liters Rotor dirt capacity 0.16 liters Rotor oil capacity 0.20 liters Minimum oil feed pipe size 6mm internal diameter Minimum oil drain pipe size 20mm internal diameter Available with or without Cut Off Valve ( C.O.V. ) The net weight of the FT025 is 1.4kg.

    Driven Type : Electric

    ...more
    Get Best Price
  • FilterMag

    FilterMag

    Request for Price

    Filtek introduces a patented product FILTERMAG, which is clamped onto your oil filter within seconds to remove ferrous and steel particles from 40 micron down to 1 micron from your oil. These tiny damage causing particles are not captured by the existing spin on oil filters in your engine. FILTERMAG IS completely reusable with a 5 year warranty. Fits metal canisters from 2.5 to 5.5 inch diameter. Typical applications include the following Car / Truck / Bus / Industrial Engines, Suzuki / Hyundai / Ford / Honda / Toyota / TATA Cummins / Leyland / CAT/ KOMATSU / CUMMINS and ALL engines with spin on oil filters.

    ...more
    Get Best Price
  • Filtek GR-301 Hydraulic Oil Filtration Skid

    Filtek GR-301 Hydraulic Oil Filtration Skid

    Request for Price

    1. Portable, Compact Plug & Play 7 LPM unit model GR-3012. Fully moulded Aluminum Die Cast Body and Cover.3. Special Double-layered structure ( Magnetic + Filtration Chamber )4. 1 micron filtration to NAS 7 and below5. Quick connect couplings for inlet and outlet on front facia.6. Magnetic Conditioner (>1000 gauss ) chamber for all Iron particle removal7. 100 ml water drain chamber8. Replaceable depth filter 1 micron with woven cotton for moisture adsorption.9. Low consumable cost.10. Pressure gauge/Hour Meter and Motor protection.11. Single Phase 110/220 VAC, 50/60 Hz Motor + 10 LPM Pump12. Approximate dimensions (LBH) of the Skid are 400 x 400 x 1200 mm13. Total skid weight is 65 Kgs

    Driven Type : Hydraulic

    ...more
    Get Best Price
  • Filtek GR-300 Hydraulic Oil Filtration Skid

    Filtek GR-300 Hydraulic Oil Filtration Skid

    Request for Price

     Portable, Compact Plug & Play 3 LPM Device2. Fully moulded Aluminum Die Cast Body and Cover.3. Special Double-layered structure ( Magnetic + Filtration Chamber )4. 1 micron filtration to NAS 6 and below5. Quick connect couplings for inlet and outlet on front facia.6. Magnetic Conditioner (>1000 gauss ) chamber for all Iron particle removal7. 100 ml water drain chamber8. Replaceable depth filter 1 micron with woven cotton for moisture adsorption.9. Low consumable cost.10. Pressure gauge/Hour Meter and Motor protection.11. Single Phase 110/220 VAC, 50/60 Hz Motor + 5 LPM Pump12. Dimensions (LBH) of the Skid are 360 x 370 x 760 mm13. Total skid weight is 45 Kgs

    ...more
    Get Best Price
  • Filtek Centrifugal Purifier

    Filtek Centrifugal Purifier

    Request for Price

    Filtek India (P) Ltd has introduced a Centrifugal Oil Purifier to remove all solid impurities and water from light diesel oils (LDO), diesel, heavy fuel oils (HDO) and mineral oils to ensure reduction in engine wear resulting in extension of equipment life.

    Weight : 250 Kg

    ...more
    Get Best Price
  • CK 600 Portable Oil Filtration Skid

    CK 600 Portable Oil Filtration Skid

    Request for Price

    .

    Get Best Price
  • CK 400 Portable Oil Filtration Skid

    CK 400 Portable Oil Filtration Skid

    Request for Price

    Get Best Price
  • CFE 600 PD Portable Oil Filtration Skid

    CFE 600 PD Portable Oil Filtration Skid

    Request for Price

    BENEFIT Effective 3 stage filtration Combination of Centrifuge filter And Micro Glass fiber filters Centrifuge filter to remove more than 70% solid contaminants Dual Cartridge Filters for fine filtration Water Eliminator filter can be used Pressurized Delivery

    Application : Water Use

    Voltage : 220V

    Automatic Grade : Automatic

    Power : 3-6kw

    Driven Type : Electric

    Warranty : 2years

    ...more
    Get Best Price
  • Bilge Kleen Oily Water Separator System

    Bilge Kleen Oily Water Separator System

    Request for Price

    Filtek has introduced a BilgeKleen, an oily water treatment Unit to separate oil from water and transfer the clear water back to the tank. This consists of a compact coalescer unit to remove floating petroleum products from water / coolant tanks using a floating skimmer and coalescing plates and media. A floating skimmer connected to a suction pump is placed in the bilge tank and transfers the oily water in a separate coalescer tank where the oily water is dispersed through parallel plates. The coalescing media helps to collate smaller oil droplets into bigger droplets causing oil to float on surface of a liquid and eventually separate out through the tank skimmer in a separate oil collection tank. Clear water is recirculated through a patented 15 micron cartridge back to the bilge tank. BENEFIT Reduce load on the main OWS consumables. Water output of 15 ppm discharge as per MARPOL regulation. Minimal consumable costs Cost effective solution User friendly  

    ...more
    Get Best Price
  • Centrifugal Oil Cleaners Skid

    Centrifugal Oil Cleaners Skid

    Request for Price

    Get Best Price
  • Hydraulic Oil Filtration Skids

    Hydraulic Oil Filtration Skids

    Request for Price

    Get Best Price
  • HVAC Compressors Spares

    HVAC Compressors Spares

    Request for Price

    Get Best Price
  • Portable Oil Filtration Skids

    Portable Oil Filtration Skids

    Request for Price

    Get Best Price
  • Oily Water Separator

    Oily Water Separator

    Request for Price

    Get Best Price

Services

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Manufacturers
  • Year of Establishment 2004

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Filtek, an ISO 9001:2015 Company was established in May 2004 to provide high quality and cost effective filtration solutions for the global marketplace.
The manufacturing facility is based at Pune (Maharashtra) India. A team of dedicated professionals with over 25 years experience in manufacture, sales and retrofitting of centrifugal by-pass filters, are able to offer OEM fitments options or full retrofit kits on your engines and equipment. We understand that each customer has specific requirements, for which we aim to offer comprehensive service and unrivalled customer care.
Our in-house testing facilities are fully equipped to ensure that all products meet specification before dispatch. Our machined parts are manufactured on CNC and VMC machines. We strive to develop and improve our product performance through continuous research, testing, customer feedback while providing full traceability for all product manufactured by us. Filtek India (P) Ltd. was recently awarded the International Achievers Award 2009 for Quality Excellence, presented by International Achievers Forum.
What We Offer?
Our core product line is the Centrifugal Oil Cleaner for diesel engine application. Engine manufacturers are continuously striving to develop new technologies to increase drain intervals and reduce level of soot and NOx emissions. Filtek Centrifuges greatly aid in this pursuit and are excellent in removing carbon soot to sub micron level.
We have recently introduced Hydraulic Filtration Skids which will provide NAS 7 cleanliness and better in just 3 passes of the oil volume through our microglass elements. The Skids powered by a pump+motor are compact, portable and have the advantage of moisture and ferrous particle removal from hydraulic oils. A flow rate of 5 LPM provides quick cleaning of the oil tank. Specific systems can be manufactured for special applications.
We also provide tailor made systems for filtration of various fluids and large tanks using a combination of centrifuge and cartridge filter technology.
Read More »

Contact Information

Filtek India Pvt. Ltd.

  • Shrish Patwardhan
  • 34/2/1, Oxford Golf Course Road, Mumbai- Pune Bypass Highway, Bavdhan BK Pune – 411021, Bavdhan Khurd, Maharashtra
top