Filtek India Pvt. Ltd. Bavdhan, Pune, Maharashtra

The Filtek Centrifugal Oil Cleaner model FT025/060/200/400/600 are widely used on land based as well as marine generators since the last 40 years. This is a very effectThe Filtek Centrifugal Oil Cleaner model FT025/060/200/400/600 are widely used on land based as well as marine generators since the last 40 years. This is a very effective bypass lube oil filtration to maintain the quality of lube oil for a longer period. The centrifuge is driven by the lube oil pressure of the engine to clean the oil down to 1 micron level. This cleanable unit requires no consumables and is very effective in increasing the oil drain intervals as well as the time between engine overhauls. The inlet to the centrifuge is taken from the lube oil pump/lube oil cooler and the oil is drained back to the tank through the tappet cover/inspection plate/crankcase cover under gravity. A safety Cut-off valve protects the engine from oil starvation at low idle RPM. Negligible pressure drop paves the way for a safe and efficient oil filtration unit. The selection of Filtek Centrifuge model is based on the oil sump capacity of the of the 

  With increasing frequency, utility owners and operators are experiencing a significantly increased need for oil handling and treatment requirement.Any boiler’s capability to burn commercial grades of Heavy Fuel Oil is dependent on the fuel characteristics and the level of contaminanWith increasing frequency, utility owners and operators are experiencing a significantly increased need for oil handling and treatment requirement. Any boiler’s capability to burn commercial grades of Heavy Fuel Oil is dependent on the fuel characteristics and the level of contaminants in the fuel.As fuel grade and quality decrease, the resultant impact on the burner’s operating reliability and economics will be strongly influenced by the ability of fuel handling systems available to provide properly treated fuel.Insolubles in the Thermic fluid can cause havoc with the performance of the system, even leading to choking of the complete system.This is one of the major reasons for discontinuing the use of Thermic fluid – the presence of percentage insolubles of more than 1%.   ts in the fuel.As fuel grade and quality decrease, the resultant impact on the burner’s operating reliability and economics will be strongly influenced by the ability of fuel handling systems available to provide properly treated fuel.Insolubles in the Thermic fluid can cause havoc with the performance of the system, even leading to choking of the complete system.This is one of the major reasons for discontinuing the use of Thermic fluid – the presence of percentage insolubles of more than 1%.

  Filtek FT Centrifuges are used successfully on Bio Diesel Manufacturing Systems for fine filtration of biodiesel. All contamination as well as wax and gummy insolubles are effectively removed BENEFITS   Removal of contamination down to 1 micron Fully cleanable centrifuge Effective combustion

  The Filtek Centrifugal Oil Cleaner is used as an added bypass filter in conjunction with the existing lube oil filter element. Smaller sized particles ranging between 1 micron and 5 microns are removed by the centrifuge which help increase the engine life a BENEFITS Longer oil life Longer engine life Zero consumable costs Increased Productivity nd oil life. The Centrifuge being a cleanable unit has no consumable parts. Since the safety cut off valve is provided to operate pressure more than 1.8 BAR there is no fear of oil starvation of the engine. As only 8% to 10% oil flow is bypassed to the centrifuge the pressure drop in the system is negligible and less than 0.2 BAR.

  Centrifuge  BENEFITS Improved surface finish Longer coolant life Longer Die life Zero consumable costs Increased Productivity extremely beneficial to the cold heading machines to remove all particles down to 1 micron from the cutting fluids. We can offer a verity of centrifuge models suitable for different coolant capacity.

  The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean the gear box oils and is extremely effective in removing the dust contamination, wear metals and ingressed dust particles ranging between 1 micron and 5 microns. The Centrifuge being a cleanable unit has no consumable parts.   The Filtek Centrifugal Oil Cleaner mo BENEFITS Extended oil change period Extended friction part life del CK600 is a self contained skid powered by an 80 LPM pump+motor to clean the gear box oils and is extremely effective in removing the dust contamination, wear metals and ingressed dust particles ranging between 1 micron and 5 microns. The Centrifuge being a cleanable unit has no consumable parts.