Flow Meter Dealers in Khed, Pune (20 products available)

• Application: ETP/STP/Milk/ Water
• Material: Stainless Steel
• Driven Type: Electric
• Color: Grey Blue
• Pressure: As Per Size
• Usage: Industrial, Laboratory, Chemical Flow Measurement, Water And Chemicals, Hospital, Clinic, Corrosive and Non-corrosive Liquid
• Voltage: 220V
• Operating Temperature: 125 C
• Packaging Type: Carton Box
• Specialities: Digital Water Meter Display, Accuracy
• Phase: Single Phase
• Accuracy: ± 0.5%
• Country of Origin: India
• Warrenty: 1 Year
• Corrosion Resistance: Yes
• End Connections: As per requirement
• Electronics Enclosure: IP 65
• Main Supply: 230V AC/24 VDC
• E.M.F Type: Full Bore
• Temperature: Max: 80ºC
• Conductivity: Min. 5 μS/cm
• Lining: Neoprene/Soft Rubber/Hard Rubber
• Electrode (sensor): S-S316L.
• Flanges: ANSI # 150 M.S./ S.S. / Any other
• Body: M.S / C.S.
• Junction Box: Aluminum Die cast IP 65/67.
• Mounting: Remote Display

• Display: F.I.T LED Display & 420ma O/P Rmote Mounting
• Pressure: As Per Size
• Accuracy: ± 0.5%
• Model: FT-05
• Main Supply: 230V AC/24 VDC
• E.M.F Type: Full Bore
• Temperature: Max: 80ºC
• Electrical: Min. 5 μS/cm
• Lining: Neoprene/Soft Rubber/Hard Rubber
• Electrode (SENSOR): S-S316L.
• Flange’s: ANSI # 150 M.S./ S.S/Any other
• Body: M.S / C.S.
• Junction Box: Aluminum Die cast IP 65/67.
• Applications: Non-corrosive liquid
• Mounting: Remote Display

• Steel: 1",2",3",1/2",1/4",4",6"
• Steel: 1",2",3",1/2",1/4",4",6"

within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. a pick-up sensor produces an electrical signal as each blade crosses through its low magnetic or rf field. this signal is amplified and conditioned by a transmitter or fed directly into a ratetotalizer, and represents the actual cubic feet per minute (acfm) flowing through the meter. the k-factor is stenciled on the meter body in pulses per actual cubic feet (pacf). because gases are compressible, most people desire to measure the equivalent amount of gas corrected for the line pressure and temperature to standard cubic feet per minute (scfm at 60ã�â°f, 14.69 psia). if the flow temperature and pressure are relatively constant, then a simple correction can be calculated to shift the k-factor from pacf to pscf and a simple totalizer (measurement systems india make ) may be used. when flow temperature and pressure are not constant, a flow computer. specifications linearity 1 ã�â±1.0%0.5% repeatability 1 ã�â±0.25% maximum over-range 125% of flow rate for intermittent periods frequency output 0 to 1,100 hz voltage output approximately 100 mv@ 100 hz to 1.5 v (rms)@ 1,000 hz. pressure drop 0.5 psi at 100% of flow range pressure rating we manufacture flowmeters for most pressures. installation vertical or horizontal (any direction). materials of construction body: 316 l stainless steel. flanges: 316 stainless steel rotor: 431 stainless steel. rotor shaftbearings: standard: tungsten carbide v-cup cartridge frame retainer: 302 stainless steel cartridge frame: 316 l stainless steel. temperature range:meter with bearing structure of: for other temperatures consult factory.

We are the authorised dealer of Digital Water meter ( Anolog ).

• Brand Name: Mass Flow
• Size: 0mm to 1000mm
• Place of Origin: Pune, Maharasthra
• Material of Construction: Material of Construction Gas Turbine Flow Meter Regularly Stainless Steel 316 L.
• Condition: Good
• Feature: Flow Meters With Remote Display Extrinsic Proof Certified,High Accuracy,Calibration Certificate.
• Product Type: Venturi Type Flow Meters

The Gas Turbine Flow Meter, which we offer, measures gas volume flowing through an annular passage in the meter. The flowing gas volume is totalized on a local mechanical counter. In addition, low or high frequency pulse signals are generated to infer the gas flow and volume. The indicated gas volume is the actual volume flowing through the meter at the actual temperature and pressure.The Gas Turbine Flow Meter is available in two models The Gas Turbine Flow Meter is used for high accuracy and custody transfer applications. The Gas Turbine Flow Meter is an economically priced meter with a good accuracy.  Gas Types: The Gas Turbine Flow Meter in its standard design can be used for all non-aggressive gases, such as natural gas, methane, propane, butane, city gas and fabricated gas, air, nitrogen, etc. For aggressive gases, like sour gas, biogas and oxygen, special designs are available with Teflon coating, special lubrication or special purging. See table 1, for detailed requirements or different type of gases.  Measurement Systems Gas Turbine Flow Meter are designed for precise metering of all non-aggressive gases and fuel gases such as natural gas, propane, butane, ethane, coke oven gas, town gas, acetylene, nitrogen, carbon- dioxide, air and all inert gases. These are available for flows up to 50000 actual M3/Hr. These Gas Turbine Flow Meters are approved by Legal Methodology for Custody Transfer Application. Gas Turbine Flow Meter has a wide range of 20:1.The meter incorporates Direct Reading Local Electronics Totalizer. Option of Pulse Transmission for remote indication is available. Flow Computers and Volume Correctors are available as optional.Temperature Ranges : As standard The Gas Turbine Flow Meter is designed to operate at temperatures between -10oC to 60oC. Special low and high temperature designs are available on request.Standard Accuracy Limits For Custody Transfer Models Are In Accordance With The Ec Directives And Many Foreign Regulations     ± 0.5% for 0.2 Qmax to Qmax     ± 0.5% for Qmin to 0.2 Qmax  As An Option For The Custody Transfer Model The Accuracy Limits Can Be Improved To     ± 0.2% for 0.2 Qmax to Qmax     ± 0.3% for Qmin to 0.2 Qmax     Material of Construction : Material of Construction Gas Turbine Flow Meter Regularly Stainless Steel 316 L. Details - Flow Meters With Remote Display Extrinsic Proof Certified, High Accuracy Calibration Certificate Warranty - 1 Year Turbine Type and Differential Pressure- Venturi Type Flow MetersMaterial Used - Steel Sizes Available 0mm 10mm 15mm 20mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm 150mm 200mm 250mm 300mm 400mm 500mm 600mm 800mm 100mm

• Material: MS,SS ,CS
• Brand Name: BSS
• Packaging Details: corugated / wooden

flow meter for water /alcohol/fermented wash/molasses.

• Brand Name: e-MAG
• Power: 24VDC 230VAC
• Accuracy: 0.5%
• Certificate: ISO 9001-2015
• Repeatability: 0.5%
• Place of Origin: India
• Output: 4-20mA RS485 GSM
• Working Pressure: 16Bar

We are well known enterprise instrumental in manufacturing and supplying supreme quality Online Effluent Flow Meter. Our offered meters are widely used in measuring flow of effluents in major water treatment and sewage treatment plants. These flow-meters being highly efficient and superior finished, are manufactured by using fine grade raw materials and advanced machinery. Moreover, we supply our offered flow meters in defect proof packaging at relatively low market rates. Applications: •ETP •Waste Water Treatment Processes •Sewage Treatment This Model Consists: •Remote Transmitter •Compact or Remote mounted Dual Display •Flanges •Power Supply

• Usage: Industrial
• Type: DIGITAL
• Accuracy: +- 0.5%
• Application: Water
• Main Supply: 230V AC/24 VDC
• E.M.F Type: Full Bore
• Temperature: Max: 125 Degree C PTFE , 175 Degree C for PFA
• Conductivity: Min. 5 uS/cm
• Electrode (SENSOR): Hastelloy C Titanium Platinum
• Body Material: Mild Steel

The Flow Governor is a protective device, installed downstream of the Flow Meter, to limit the flow rate through the Flow Meter, to the maximum Meter flow rate capacity. This becomes essential when the pump capacity is greater than the capacity of the Flow Meter or when a common pump is used for more than one Flow Meter   DESIGN FEATURES   Low pressure drop Adjustable flow rate Compact and rugged construction A sensitive pressure differential orifice design PRINCIPLE OF OPERATION   The Flow Governor consists of a body having an orifice, a spring balanced piston and a butterfly control valve. Variation in liquid flow across the orifice creates a differential pressure, which applies a downward or upward force on the piston. This in turn rotates the butterfly valve to restrict and maintain a constant rate of flow. The downward compression force on the piston is resisted by the spring tension, which is adjustable and enables accurate presetting of a constant flow rate. APPLICATIONS   Single pump, multi-point gantry filling High flow regulation for meter protection

• Type: Flow Indicators
• Material: Aluminum, LDPE, Plastic, PVC, UPVC
• Application: Gas Use, Liquid Use
• Type: Indicator
• Color: Black, Blue, Red, Sky Blue, White
• Condition: New, Used
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Feature: Durable, Easy Maintenance.
• Flanges: Indicator

• Steel: 1",2",3",1/2",1/4",4",6"
• Steel: 1",2",3",1/2",1/4",4",6"

within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. a pick-up sensor produces an electrical signal as each blade crosses through its low magnetic or rf field. this signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and represents the actual cubic feet per minute (acfm) flowing through the meter. the k-factor is stenciled on the meter body in pulses per actual cubic feet (p/acf). because gases are compressible, most people desire to measure the equivalent amount of gas corrected for the line pressure and temperature to standard cubic feet per minute (scfm at 60â°f, 14.69 psia). if the flow temperature and pressure are relatively constant, then a simple correction can be calculated to shift the k-factor from p/acf to p/scf and a simple totalizer (measurement systems india make ) may be used. when flow temperature and pressure are not constant, a flow computer. specifications linearity 1 â±1.0%/0.5% repeatability 1 â±0.25% maximum over-range 125% of flow rate for intermittent periods frequency output 0 to 1,100 hz voltage output approximately 100 mv@ 100 hz to 1.5 v (rms)@ 1,000 hz. pressure drop 0.5 psi at 100% of flow range pressure rating we manufacture flowmeters for most pressures. installation vertical or horizontal (any direction). materials of construction body: 316 l stainless steel. flanges: 316 stainless steel rotor: 431 stainless steel. rotor shaft/bearings: standard: tungsten carbide v-cup cartridge frame retainer: 302 stainless steel cartridge frame: 316 l stainless steel. temperature range:meter with bearing structure of: standard: tungsten carbide: -40â°f to 300â°f (-40â°c to 149â°c). for other temperatures consult factory.

Gas Flow Meters

air flow tester, Air Leak Tester

electromagnetic flow meter.

Flow Meters, Water Meters, Oil Flow Meters

Gas Flow Meter

Flow Meters, air flow sensor, Gas Meter