Generator Parts And Accessories Dealers in Vijay Nagar, Pune (58 products available)

The PEM-HG is able to generate up to 350 cc/min of Hydrogen with purity better than 99.9995% and pressure up to 90 psi That is adjustable by user via Keypad The PEM-HG use long life electrolytic cell with polymeric membrane (PEM) using distilled water. No Lye or acid solutions are used. The on-board CPU check for internal leaks and constantly control the water quality, water level, H2 over pressure , over flow and produce alarm if any parameter is out of range.

Ground power unit is used for aircraft external power requirement. We manufacture all types of gpu, static frequency converter, rectifier units, smps battery chargers etc.

Indirect Fired Hot Air Generator: In this type of heater, shell in shell construction of two passes of combustion and flue gas and Three passes of Process air Hot gases, after complete combustion are then passed through Tube Heat exchanger, comprising of second & third pass. Fresh Air from atmosphere is fed onto the surface of combustion chamber through a statically and dynamically balance blower. The shape of passage ensures to form an envelope on the combustion chamber to extract maximum heat, thus higher heat transfer efficiency. The air continues to pass through outer surface of heat exchanger, gaining heat and is collected at the other end of hot air generator. The generation of hot air is within minutes of its start. Types of Fuel can be use: Furnace Oil LDO Diesel LPG CNG Propane

Drinking water as well as wastewater flows through the distribution and collection network. Many of these networks aren’t completely flat, but have got slopes in part of them. Drinking water power plants with pressure reduction turbines can produce electricity. This product is suitable for the areas where water at high head or high pressure is available. The high pressure water contains pressure energy which can be converted into kinetic energy with the help of setnozzles. The force of high pressure water falls on the turbine blades causing it to spin. The turbine converts the kinetic energy into mechanical energy. The asynchronous generator coupled to turbine which converts mechanical energy into electrical energy.

The alternators are designed and customized to fit the specific application and are made in according to the last technologies available like the Neodymium Magnets.

• Type: Water Cooled Generator
• Application: Water Cooled
• Rated Voltage: 220V, 240V, 380V, 440V
• Output Type: AC Single Phase, AC Three Phase, DC
• Rated Power: 1-100 Kw, 100-500 Kw, 1000-2000 Kw, 500-1000 Kw
• Speed: 1500-2500 Rpm, 2500-3500 Rpm, 3500-4500 Rpm, 500-1500 Rpm

Wind turbines are used to generate electricity from the kinetic power of the wind. When air hits the wind turbine, the blades spin, converting the wind’s kinetic energy into mechanical energy. This rotary motion then travels down the shaft and drives a generator where the electricity is produced.

Features : The set consists of three-phase motor as prime mover and DC welding generator of a special patented design Excellent high quality welding with big savings in power bills Positive protection against overload and single phasing Mobile and mounted on rubber-tyred wheels Ideal for welding with cellulosic electrodes for cross country pipelines and thermal/nuclear power plants.

The only running cost is electricity. There are no other costs such as rentals for cylinderstanks, deposits, transportation, taxes. No manpower is needed to procure, load, unload, connect and disconnect heavy high pressure cylinders. And the risk of running out due to unpredictable deliveries is eliminated.

• Phase: Three Phase
• Rated Current: 10 - 3000A
• Frequency: 60 Hz
• Rated Power: 5 - 2000 kVA
• Usage/Application: Industrial
• Output Voltage: 415 V

    Features   • Energy converter • High compression ratio • Longer service life • Powered by fuel • Longer functional life • Durable   Product Details   • Tractor engine driven Generators available from 10kVA to 45kVA • Multipurpose product – Available as attachment • Available in 2 options – Gear driven & Belt driven • Cost effective and lowest operating cost

• Power: 125kVA
• Voltage: 415 Volts
• Fuel Type: Diesel
• Size: 11 ft x 5 ft
• Current: 176 Amps
• Fuel Consumption At 75 Load: 15 ltr per hour
• Height: 5 ft
• Country of Origin: Made in India

• Fuel Type: Oil, Gas
• Material: SS, MS
• Brand Name: Nimotherm
• Usage/Application: Air heater for WDO, PBO, Top Coat Oven, etc
• Capacity: 1 to 7 Lac Kcal/hr (0.7 M kcal/hr)
• Material Grade: SS 304, SS316L, SS310
• Temperature: 150 - 300 Deg.C

The hot water is generated by indirect heating of water in a heat exchanger with steam as the heating medium. It is ideally suited for pharmaceuticals, breweries, textiles, hospitals & hotel industry. Product Features Instantaneous generation of hot water – Less warm up time Skid mounted assembly – Compact, minimum floor space required, simpler plant structure, easy installation at sight Pump and trap combination – No stall conditions Accurate temperature control – Desired temperature output Easy installation and commissioning Heat treated and nitrided internals of valve – Prevents erosion, wire drawing effect Pressurised Deaerator - is a system designed to heat boiler feed water in order to reduce oxygen and carbon dioxide level to reduce corrosion of boiler internals, tubes, etc. Thermax pressurised deaerator economically handles wide range of flow rates & temperature for both boiler feed water & process applications.

Thermax manufactures hot water boilers in the range of 50,000 to 90,00,000 kcal per hour. The hot water boilers are designed to operate on various types of fuels such as heavy oil, light oil, gas, duel fuel, coal, husk and other agro waste fuels.

• Fuel Type: Diesel
• Voltage: 220 V, 380 V, 400 V
• Power: 0-8 Kw, 8-16 Kw
• Application: Agriculture
• Condition: New, Used
• Rated Speed: 0-500 rpm, 500-1000 rpm, 1000-1500 rpm

• Features: Accurate dimensions, Excellent performance , Compact design , Durability , Flawlessness, High strength.

Step electric generator

Oxygen Generators, Nitrogen Generators, HEAT LESS AIR DRYER, gas systems

Synchronous Generator, Hub Assembly, Rotor Blade, 3 CFL UPS

Remote monitoring generator provides you all the information about your generator, on your desktop. Rmg (remote monitoring generator) is a remote monitoring and control system, especially designed to monitor and control the generators placed in remote areas.

Lpg Gas Generator, Generator

ORC Turbine Generators, Organic Rankine Cycle, Steam Tracing System

Hot Air Generators, waste heat recovery systems, Tube & Shell Heat Exchangers

Ozone Generators, carbon dioxide sensors, voc sensors, o3 sensors

Auxiliary Alternator, Starter Motors, Automotive Alternator

7.5 KVA Air Cooled Generator, 625 KVA Water Cooled Generator

Generator Sets, Power Equipments