Industrial And Commercial Heaters Dealers in Pune

Our mica Band heaters are made of Nickel Chrome resistance ribbon precisely wound on specially selected Mica or Micanite sheet. It is then insulated by covered by metal sheathing and rolled to the required shape. We build every technically possible heater as per your requirement.   CONSTRUCTION Mica insulation provides excellent dielectric strength while permiiting rapid and efficient heat migration through the sheath of the heater and into and the object requiring heat. The use of mica llows the mass of the mass of the heater to be kept to a minimum , thus redusing weight, accelerating heat transfer , and keeping costs to a minimum. Datta mica bands are encased in electro-galvanized steel with stainless steel sheath offered as optional.   TERMINATIONS High quality resistor ribbon or wire is precisely wound over mica cores and terminated to either stainless steel terminal posts designed to allow slippage rather than be twisted off, or connected to nickel alloy lead wires.      

Open helical coils of high resistance wire evenly stretched and lay through fluted refractory bobbins. These heating elements are then inserted into 1" of higher diameter metal pipes which are welded to liquid tanks.

Heating Element is offered by us to match up with the increasing demands of the market. These heaters are of replaceable type and are highly suitable for various applications that include oil heating, geyser, chemical and water heating. Our range of Porcelain Heating Element is made out of Open helical coils of high resistance wire

Ceramic Bobbin elements are fitted in a metal tube for applications in liquids, ovens (in this case a robust construction is essential) They find a variety of applications in Industry. Can be manufactured in various diameters, lengths, kW ratings, and operating voltages.

Quick Opening Closures, Net Scrubber

We are offering an extensive range of high quality Steam Heater which are designed by our With the valuable assistance of skilled team of professionals.Steam Heater are widely used to heat the atmospheric air to the required process temperature.

Bobbin heaters are used in the heating of air and heating various liquids when disassembly without draining is absolutely necessary. These heaters are available in various diameters and lengths.Note : Besides the standard size of heaters other sizes can be made as per customer specification.

Strip heaters made from mica and ceramic insulators, sheathed in mild and stainless steel providing terminals at one end or both ends. These heaters are most efficient and economical. Applications:• Oven, dies and moulds • Hot plates • Sealing equipments • Food processing • Rubber moulding • Other surface heating Features: • High quality insulation for effective and uniform heat transfer • Maximum 30 watts per square inch • Wire lead or bolt type terminals • Design as per customer requirement

Hospital Waste Incinerator

Thermo Hopper heating systems play an important role in the removal of fly ash from precipitators and bag filter hoppers. The hopper heater is designed to preheat the hopper to prevent moisture condensate from collecting in it during startup conditions. In addition, they maintain the hopper and fly ash at temperatures above the flue gas acid dew psoint during normal operating conditions, Good heater contact with surface resulting in lower element temperatures.

8046 Nut Power Steering Gear, 8043 Nut Power Steering Gea

All varieties of heavy duty industrial radiators suitable for engines up to 2000 KW. which include: Diesel Power Generating Sets. Earth Moving Equipments,Compactors. Mining Shovels, Excavators, Backhoe Loaders Locomotive Rail Coaches Application

Tubular Heating Elements are used for practically the entire range of electric resistance heating applications. Tubular Heaters are the most versatile and widely used source of electric heat for industrial, commercial and scientific applications. They can be designed in a wide range of electrical ratings, diameters, lengths, terminations, and sheath materials. Important and useful characteristics of tubular heaters are that they can be formed into virtually any shape, brazed or welded to any metal surface, and cast into metals.

S.S.Terminal pins to prevent fusing and burning at terminals., Imported High grade MgO powder insulation for best heat transfer and electrical insulation.Compacted Heating Elements for efficient heat transfer & longer life.Nichrome 8020 or Kanthal Heating Coil.

We offer hot water generators. Technical specification:   type: coil type hot water generator capacity: 70,000 kcalhr to 20,00,000 kcalhr. Working temperature: 95°c to 140°c fuel: l.d.o.f.o.lpg thermal efficiency: 87% ± 2% based on n.c.v. Of fuels. Heat recovery unit: economiser. Air preheater: in-built.

Mostly used for heating up solids such as injection presses heating plates of various tools, they can also be used for heating up water of gases under certain conditions. Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc… They are also commonly found in the chemical, electronics, medical equipments, packing. Various cartridge heater technologies are available. The choice of technology will depend on technical specifications Required and the application. Available technologies are:  High-density cartridge heaters (HDC)  for watt densities from 6.5to50W/cm2.  Low-density cartridge heaters (LDC) for Watt densities from 1to6.5/cm2. Watt density ( W/cm)2 can be a decision factor, but dimensions heater and conditions of use (temperature, vibrations, environment) are also important factors when making the choice between the technologies.  Applications  • Plastic processing machineries. • Hot runner module. • Food processing. • Labeling machineries and a lot of other applications.

We are recognized among the major Oil and Gas Fired Thermal Fluid Heater Manufacturers in India. The Oil and Gas Fired Thermal Fluid Heaters offered by us are accessible in vertical and horizontal types. They have the burner control of Single Stage, Two Stage, and Step Less Modulating.   Product Range Capacity Coil Type – 50,000 to 5,000,000 kcal/hr. Temperature - Range 300°C for standerd unit                        and 350 & 400°C for high tempratureFuels - LDO, HSD, FO, LSHS, Natural gas, LPG, Biogas.Efficiency -Overall efficiency of 88 % (+/-2%) on NCV   Special Features 1. High Efficiency—Less Fuel consumption. 2. Single Button Start / Stop with Automatic Control     with Safety features. 3. Noiseless operation with monobloc Burner 4. Smokeless combustion. Low Pollutants.5. No explosion hazards due to coil design.

RTHE - Electric Thermic Fluid Heaters ROSS electric operated thermic fluid heaters are designed & manufactured using high quality heating elements, precise dimensions in a state of the art manufacturing facility. Our quality control guarantees highest safety and long life span. Electrical energy offers various advantages in process heating. As the cleanest form of energy. It does not give out any emission. As there is no direct flame for heating, it can be used under difficult conditions e.g. in hazardous areas. Explosion proof units can also be supplied. Short installation time due to pre-assembled units. Depending on the overall dimensions, complete systems can be skid mounted on a base frame. Systems are factory tested for function, control and leakage. Installation and start-up time can therefore be greatly reduced. Low Watt density flanged electric heaters Low watt density heaters maintain low heat flux densities. The surface area provided in generously sized to keep thermic fluid film temperatures low, which protects the thermic fluid from carbonizing.