Metal Primer Dealers in Pune

We are offering primer. Scope: epoxy coating is a two part system which are mixed before the application. the two parts consist of 1) an epoxy resin which is cross linked with 2) a co- reactant or hardner. It produces a hard, chemical & solvent resistance finish. a two pack epoxy coating with superb performance in severe marine & industrial environment. The product has excellent resistance to chemicals, solvents, fumes, splash & spillage. Use: recommended for use on offshore platform structural, helideck & accommodation areas as well as underdecks & above water area jackets. the product is also suitable for application on ms & concrete areas of fertilizer plants, chemical units, refineries, petrochemicals etc. Product data: type two pack, cured with polyamide composition catalyzed epoxy resin suitably pigmented. Viscosity (ford cup b4) 70±10 seconds specific gravity 1.05±0.05 mixing ratio base: catalyst(4:1) by volume pot life 4-6 hours application brush conventional airless spray recommended dft 30±5µ per coat theoretical spreading rate 6-7 sq.mtr. Liter drying time 1. surface dry-40 - 50 min 2. tack free- 4 hours 3. hard dry-over night curing time 6-7 days over coating interval min: overnight max: 5 days flash point above 40˚c colour as per is & ral k5 shade cards packing 20 liters thinner pragati make epoxy thinner finish smooth & matt semi glossyglossy after complete curing of paint following tests should be carried. No. examine test specification result 1. adhesion test after 24 hrs. ( no lifting of film form) pass 2. scratch hardness test 1500-2000 gm. pass 3. flexibility to pass ¼ inch mandrel pass 4. salt spray 150-200 hrs. pass 5. humidity test 140 hrs. No blistering rusting & no loss of adhesion

Indigo Paints ST Metal Primer is a value for money alkyd based metal primer used as an undercoat for ferrous metal surfaces. Surface Preparation & Application: Stir contents thoroughly. Clean the surface to be painted by removing all loose particles,grease, dirt, rust etc. Apply one coat of ST Metal primer. Allow to dry for 4-6 hours. Any undulation can be filled using Indigo Knifing Paste Filler Grey. Allow to dry. Sand the surface and apply one coat of Indigo ST Metal Primer. Allow the film to dry overnight before applying the topcoat. Advantages Good opacity Good adhesion

Metal Primer, Cement Paints, Wall Putty, Metalic Emulsion, Satin Ename

Primer, Base Coat, Decorative Paint, Industrial Paints, Paints, Thinner

Primer, Industrial Paints, Stainer, Stover Paints, Thinner, Stai

Primer, Epoxy Red Oxide Zinc Phosphate Prime

Primer, Acrylic Paints, PU Paints, PU Thinner, Qd Paints, Ral Shad

Primer, Paints, Cement Wall Putty, Paint Stainers, Synthetic Enamel Paint

Primer, Paints, Red Oxid

Red Oxide Primer, Paints, Specialty Primers, Anti Corrosive Coating