N P Electronics Paud Road, Pune, Maharashtra

UNIVERSAL RESET TOOL FOR ON BOARD LIGHTS - . ­ Zerolight is a device able to make the zero setting of the on board pilot-light of all existing and future systems. The tool's hardware can be up-dated even for future systems. TECHNICAL FEATURES: Power supply: 1 2 Volt Connection: with specific diagnostic socket ACCESSORIES: Cables for all testable brands Standard operation book [multilingual Cards including vehicles models and sockets' location [multilingual) Hardware interface J1B50, CAN BUS, ISO 91 41 /KW 2000 Cable 6001 Data Router FUNCTIONS: Zero-setting 'of airbag; oil inspection. interval service, distribution belts, tyres pressure sensors Up-date is supplied on CD-ROM and it is transferred to Zerolight through serial PC No-limits for future and specific software up-dates which are periodically implemented Connection to systems through interchangeable sockets COVERED BRANDS: The actual software installed on the unit allows the checking of: ALFA, AUDI, BMW. CHRYSLER, CITROEN, FIAT. FORD. LANCIA. MERCEDES. MINI, MITSUBISHI. OPEL, PEUGEOT, RENAULT. SAAB. SEAT. SKODA. TOYOTA, VOLKSWAGEN, VOLVO.

TECHNICAL FEATURES:- Mains voltage: 230 V [:t10%) Power consumption: 200 W [Injectors tester] 60 W [Ultrasound cleaner) Operating temperature: + 5°C/+40°C Size: 395 x 295 x 475 mm [Injectors tester) 235x175x165 mm [Ultrasound cleaner! Weight: 21 kg [Injectors cleaner] 4 kg [Ultrasound cleaner! Storage temperature: -10°C/+50°C FUNCTIONS:- The ULTRASOUND 2500 is a professional device which allows injectors cleaning and testing, The device consists of two separated parts: the injectors the ultrasound Microprocessor controlled operation The standard configuration allows the testing conventional injectors [Europe, USA, Japan] mechanical injectors [K-KE] monoinjectors (Europe, USA, OTHER FEATURES OF INJECTORS TESTER:- '.Simultaneous test of 4 injectors Stored wave form~ Automatic test program Fittings included OTHER FEATURS OF ULTRASOUND CLEANER:- Adjustable 0-20 minutes timer Frequency of ultrasounds 24,5 KHz Liquid temperature 700c OPTIONAL ACCESSORIES Roll stand 7950 or 7960 Kit of electroinjectors spare parts 2700.

4WD Brake Roller group TECHNICAL FEATURES: Campo di funzionamento: Per camion. bus, furgoni Operating Range: Trucks. Buses, vans and all passenger cars, max. axle load 18 t Tyre size 10"-24" Connection: 3 x 230/400 V, 50Hz Fuses 3 x 50A, slow-acting [other power supply on request) Roller set [split] Max axle load 18 t Motor drive 2 x 11 KW AY Test Speed 2.6 km/h and 5,2 km/h Roller Diameter 280 mm Roller length 1000 mm Rollers dimensions with under-floor split roller sets [LxWxHJ 1 300 x 11 60 x 600 mm Track width min./max. variable 900/2900 mm Roller friction coefficient dry/wet 0,8/0,6 Display Unit Range of display, with automatic switching 0-8 KN, 0-40 KN 6-digits LCD displays [HJ 100 mm [L x W x HJ 600 x 880 x 380 mm Dimensions of display cabinet (W x H x OJ 600 x 850 x 380 mm FUNCTIONS:- OMS measurement system Double Speed and high performance motors: 2,6 + 5,2 Km/h Test Load: 18 T. Easy to use The infrared remote control allows one operator to carry out all tests in a fully independent way Easy Exit Thanks to this electromagnetic blocking device. the rollers exit is possible with any trucks, bus or tractors of any loads and in any atmospheric conditions, Analogical-Digital display Led indicating the threshold of unbalance, LCD display with 6 positions, double pointer for left and right wheel

Test BenchesWe manufacture excellent quality of Test Benches. Our Test Benches are popularly known for high quality and performance We are proud to present ourself as one of the most well renowned name among Test Benches Manufacturers.

Spark Plug TesterWhen it comes to the search of best Spark Plug Tester Manufacturer, N.P. Electronics appears as an most deserved name. Our company also leads the market among biggest Spark Plug Tester suppliers with a vast array of Spark Plug Tester.

Spark Plug CleanerWe are very proud to say that with the help of high quality Spark Plug Cleaner provided by us, we have been able to establish ourselves among the leaders of Spark Plug Cleaner Manufacturer and Spark Plug Cleaner Exporter. Spark Plug Cleaner provided by us are trustworthy, manufactured using latest sophisticated technology.

To contribute in controlling the noise pollution, we present to you a vast range of sound level meter. We manufacture and export the best quality sound level meter. Our sound level meter generally involves the use of weighting filter. Our sound level meter is used to measure different sound levels such as industrial noise, vehicle noise and so on. Some of the features of our highly efficient sound level meter are mentioned below:-Clean and simple design, intuitive operation , wide range of applications. Power full functions for diverse measurements. Easy to read display and stable Long-term operation.A new generation of sound level meters.

We are offering citroen smoke machine.

9001: 9001 EuroSmoke Meter for diesel emissions complete with remote control, 24 col. Printer and roll stand. Some of its features such as warmed chamber. electrovalve of smoke interception. cleaning pump assembled on a chamber of 430 mm with a power led emitter guarantee an accurate reading of the measured value. It is light and easy to handle. its Software helps the operator during the test execution according to all International different regulations. 9011: 9011 EuroSmoke module for diesel emissions to, be connected directly to the gas analysers Eurogas 8020-8040 or Total Gas 8050-8060 or to the PC (Bluetooth and serial connection] through software 7102 USB or LPT. Flow: Partial and Continuous Chamber lenght: 430 +/- 0,5 mm Warming time: < 14 mlfi Response time

The new Rpm Counter OBO 8290 allows, other than the reading of RPM, the temperature of refrigerating liquid, directly from the ECU of cars equipped by OBO standard socket. This special function makes the tool different from any other testers of its category It must be connected to RPM and TEMPERATURE connectors of the gas analyser or smoke meter. 8290 INCLUDES OBO interface: OBO socket connecting cable Rpm/temperature adapter Serial cable. DISPLAY PARAMETERS:- The parameters are displayed on the gas analyser or smoke meter displays [similar to the temperature probe and the traditional revolution clamp) CONNECTION:- to CPC "temperature" and "RPM" of all analysers and smoke meters of MOTORSCAN S. p.A. OBO connector for connection to the ECU CPC for revolution and temperature connection . Dimensions: Total length 5,5 m INTERFACE PROTOCOLS ISO18014230-4 [Keyword 2000] ISO1809141 -2 ISO18011519-4 [SAE J1850 41.6 Kbps PWM) [SAE J1 B50 10.4 Kbps VPW] ISO18015765-4 [CAN BUS)

RPM COUNTER 8270 Revolution Counter realised in cooperation with SIEMENS Germany TECHNICAL FEATURES:- Power supply 12 volt Range 1-9.999 Resolution 1 RPM/MIN. FUNCTIONS One way only to take signal from all petrol and diesel vehicles equipped by every ignition system. The display of data is possible thanks to an easily connection to the battery.Moreover it can be connected to any type of gas analysers and smoke meters of any brands.

Roller Power tester two wheels drive with electromagnetic braking device. TECHNICAL FEATURE:- Power measurement: 0/500 HP Test speed: 0/300 km/h Drive power: 0/10.000 N Axle charge: 3.500 kg Lift: pneumatic Power supply: 380 V three-phase - 50 Hz Length: 3.400 mm Width: 1.025 mm Height: 410 mm Weight: 1.470 kg Rollers length: 700 mm Min. track: 800 mm Max track: 2.200 mm Wheel min. diameter: 12 inches Rollers diameter: 400 mm Rollers axle base: 525 mm OPTIONAL ACCESSORIES:- Cooling ventilation system 6110 COMPLETE WITH: Rollers group Command box Infra-red remote control Infra-red receiver Out-put with serial cable Personal Computer 17" Monitor Ink-jet printer CD with installation software and the instructions manual FUNCTIONS: Power measurement up to 500 HP Max test speed: 300 km/h Sweep test Power test with established thresholds for RPM Probe to survey tyres temperature Power test with established thresholds for speed Road simulation with automatic calculation according to the CX value and weight. Front section for surveys on level road and slopes at different percentages. Tachograph test to check the exact value of the on board instrument [tachograph) and of the covered kilometers Lambda probe reading to check the carburation Engine revolutions reading through electronic and automatic survey . Pressure and power sensor for turbo engines Incorporated Barometric station to adjust the power according to DIN, CE, ISO and SAE regulations Storage on disk of surveyed data Data management to compare test Thanks to the infrared remote control all functions can be carried out on board Management of modular speed of the ventilation group access.

Gruppo rulli prova freni per moto. TECHNICAL FEATURES: Power engine 3,7 Kw Max force 3 KN. Test speed 5 Km/h Operating tension 400 V Roller dimensions IZJ 205x300 mm long. Friction value 0,8 dry and 0,7 wet Rollers weight: 200 Kg Dimensions roller group 800x620x250 mm COMPLETE WITH :- Command box Electronic boards ARCNET system ARCNET kit PC Special cable for emergency switch Operating system min. Windows 95 Infrared remote control 4 weighing sensors Connection cables 15 mt Frame

Road Test/Measuring Equipments.A small unit with suction cup contains a light sensitive sensor as well as signal processing circuitry. The sensor responds only to a sudden increase in light intensity which will occur when the brake light comes on. Slow changes of light intensity will not trigger any start signal. Direct sunlight is shielded off by the black suction cup. In short: With the test start unit sticking on the stop light, a sudden increase of light intensity inside the brake light case will generate a short pulse which is recognized by the system as closure of a normally open contact � like a pedal switch contact.MountingMake the suction cup stick to the car�s brake light such that it intercepts the brake light�s rays. In case the stop light glass should be very much curved or rounded, an adhesive tape may be used in addition. A dark adhesive tape may also increase light contrast registered by the sensor. Make sure the connecting cable is firmly attached to the car body by means of adhesive tape. Lead this thin cable to inside the car through the padding rubber of the car�s door. Connect the cable to the�BRAKE� or �ext. START/STOP� connections of the Peiseler test system.Road Test Equipment Testing Solution for Speed Acceleration Braking distance Braking time Distance traveled Test time RPM Fuel Consumption Wheel Slip Monitoring of transportation.

PROFESSIONAL WHEEL ALIGNMENT 8 CCD DETECTORS FOR CARS FUNCTIONS:- Curve measurement procedure according to VAG specs Detected measured procedure can be stored Cable and/or Bluetooth communication Program execution through 6-function keys which help the operator during the measurement test The operator can introduce new vehicles directly into the data bank and recall them making a selection of the customer of vehicle number plate Automatic compensation of caster measurement depending on the different axle levels Summary and comparison of measurement displayed in one screen only It is also possible to display at the same time all data in one axle Steering at 200without the use of electronic plates Spoiler adjustments Simultaneous display of rear and front angles.

. PORTABLE GAS ANAL YSERS Thanks to a special internal battery they represent the portable version of Totalgas line with whom they share the accuracy and reliability. Ideal for on road testing TECHNICAL FEATURES

PETROL AND DIESEL TIMING LIGHTS TECHNICAL FEATURES Power supply: 9 - 16 Volt RPM: 0 - 9990 RPM ris. 10 rpm Advance: 0 - 99,9° ris. 0,1° Dwell: 0 - 99.9% ris. 0.1% (fra 700-1500 RPMJ Volt: 0 - 50 Volt ris. 0,1 Volt Peack volt: 0 - 50 Volt ris. 0.1 Volt FUNCTION Timing light with microprocessor with integrated electronic for petrol engine (Lux 500J and petrol-diesel engines (Lux 51 OJ for two and four strokes. It is able to realise the following tests: Revolution Spark advance Automatic spark advance with magnetic sensor DWELL angle VOLT Peack VOLT Battery efficiency and recharge alternator automatic test CHECK AND REGULATION OF BOSCH MONO-INJECTIONS A simple instrument to monitor and to regulate BOSCH mono-injections of the monojetronic, monomotronic and Marelli. OPEL. Ford (with set 352m. FUNCTIONS Check and regulate the idling motor Check the throttle potentiometer Check the operation of the mono-injector Check the air and engine temperature probe Check the air temperature sensor Check the cut/off function Simulate a correct Lambda probe signal Itimer 5 kHz 70°C "ES 7960 2700 A complete instruction manual helps the operator during the procedures in order to achieve a complete diagnosis of the injection system.

This multifunctional tachometer has ten main features; measuring engine rpm, max rpm memories, stopwatch, hourmeter, waterproof, over-run alarm, automatic power onoff switch, backlight, mount bracket and power save system, also provides remote control switches.(For 2 stroke 1 to 6 cylinder, 4 stroke 1 to 6-8-10 & 12 cylinder)

This measures engine rpm, maximum rpm, total cumulative operating time, resetable cumulative operating time. This has dual display system for either current rpm alone or current & maximum rpm, and also has two maximum rpm memories for comparison. This has much wider selection of measuring modes.(For 2-stroke 1 to 4 cylinder, 4 stroke 1 to 6 and 8 cylinder)

This is new improved version of old PET-2000. This measures engine rpm, maximum rpm, total cumulative operating time, resetable cumulative operating time. This has dual display system for either current rpm alone or current & maximum rpm, and also has two maximum rpm memories for comparison.(For 2-stroke 1 & 2 cylinder, 4-stroke 2 & 4 cylinder, 4 stroke 1 cylinder)

This tachometer can measure rpm of engines by bringing it close to plug cord of the engines. This has many measuring modes for various of engines.(2 stroke 1 to 4 cylinder, 4 stroke 1 to 6-8 cylinder)Supplied antenna lead can be used if needed.

This tachometer can measure rpm of engines by bringing it close to plug cord of the engines. This is only 13mm thick and can be put in breast pocket.(2 stroke 1 to 2 cylinder, 4 stroke 2 to 4 cylinder, 4 stroke 1 cylinder). Supplied antenna lead can be used if needed.

Hand held tester with universal multime Particularly indicated for engine diagnostic II, as well as training FUNCTIONS Signal generator (1 Hz+ 20 ~ Low tension digital oscilloscope 'Io possibility to memorise 15 wave form Connectable to PC

OSCILLOSCOPE FOR SPECIFIC DIAGNOSIS The WITH 7350 is a portable, compact digital tool, it is user's friendly and has internal battery. Thanks to the innovative Touch Screen technology, the tool controls are displayed by means of virtual keys on the display and can be selected by the contact of the finger with the desired image on the screen. This feature makes available on the screen only necessary keys each time, so more room is left for the graphic display of wave forms thus facilitating the tool use. The tool combines the functions of a double-trace oscilloscope and those of a digital multi meter with automatic and manual scale change. TECHINICAL FEATURES: Multimeter, 2 input channel oscilloscope Graphic LCD 320 x 240 pixel back-lighted Internal rechargeable battery or external power supply Power supply: internal and rechargeable battery or external cable. OSCillOSCOPE: Volt/div: 0,2 - 0,5 - 1 - 2 - 5 - 10 - 20 - 50 Time/div: 250us - 500us - 1 ms - 2,5ms 5ms - 10ms - 25ms - 50ms - 100ms - 250ms 500ms - 1 s - 2,5s - 5s Samples: 1 00 k each channel. Passband: 30 kHz Trigger: Selection wave front and level, mode single / auto / normal. MUlTIMETER: Volt: 0,8 - 2 - 4 - 8 - 20 - 40 - 80 . 200 Ohm: 100 - 2k - 10k . 20k - 100k . 200k FUNCTIONS: Reference sample wave forms (rev-T. D. C. sensor, temp. sen­ sor throttle, potentiomenter, debimeters, lambda probes, can bus etc ) with beforehand established set-up Re-set of autoadaptative parameters Idle speed regulation OPTIONAL ACCESSORIES Amperometric clamp 870 sUSB/RS232 Adapter 10005 ­