Saket Enterprises Manaji Nagar, Pune, Maharashtra

Made from SS / Titanium tubbing with replaceable Bobbin Type heating elements inside, provede with mounting plate and terminal box. SPECIFICATION AND TOLERANCES :  Titanium - for vertical use for Nitric and Chromic acid Solution. SS - 304 - Alkaline Solution. SS - 316 - Phosphating Solution.

Made from SS Titanium tubbing with replaceable Bobbin Type heating elements inside, provede with mounting plate and terminal box.

MICA STRIP / PLATE HEATER Nichrome ribbon wound on mica former & insulated with mica sheet. which is then sheathed in MS Plated or SS sheet.CERAMIC/REFRACTORY PLATE/STRIP HEATER Heating coil supported in Fluted Refractory insulaters & sheathed in SS/MS Plated sheets.FINNED STRIP HEATERS Basically Finns of size 65mm*35mm are fitted tightly on the Heavy Duty Strip Heaters for fast transfer of heat to flowing air.   APPLICATIONS : Best suitable for uniform heat transfer to flat surface. Rubber moulding M/c Hot Plates

Made from SS Titanium tubbing with replaceable Bobbin Type heating elements inside, provede with mounting plate and terminal box.

Made from SS / Titanium tubbing with replaceable Bobbin Type heating elements inside, provede with mounting plate and terminal box. SPECIFICATION AND TOLERANCES :  Titanium - for vertical use for Nitric and Chromic acid Solution. SS - 304 - Alkaline Solution. SS - 316 - Phosphating Solution.

Square Shape High Density Cartridge Heaters are specially developed for those application where a drilled hole is not practical.Heating coil wound around a ceramic core and isolated from SS/Incoly sheath by highly compressed layer of magnesium oxide powder. These heaters are ideal for milled slots in long platens where drilling a long hole is not possible.These heaters gives more surface contact per running inch than round cartridge heaters or D shape heaters giving longer life. Application:  Bag Sealing, Heating of Long Platens, Cutting Jawa, Heating of Shell Moulds in foundries.

Made of imported fused silica tubing with removable heating elements inside provided with heat resistant rubber cap and a connecting cable. APPLICATION :  For vertical use at higher temparature in all acids, ferric chlorideetching Baths anodizing, bright dip baths, except hydrofluoric and phosphoric.

Made of imported fused silica tubing with removable heating elements inside provided with heat resistant rubber cap and a connecting cable.

Cartridge Heater is manufactured in SS, Brass pipes with high purity MGO (Magnesium oxide powder ),high quality in chrome wire. Cartridge heater is inserted into close fit hole of dies mould or plates. Cartridge Heater are manufactured in any diameter and length. MGO powder insulation assures high Electric strength and fast heat transfer and low oxidation of the resistance wire. It is used to heat rubber molding dies, hot plates, plastic injection moulds, sealing jaws of packaging & Pharmaceutical machines. Cartridge heater with built in thermocouple temperature sensors for runner less mould are available.

Micro Tubular Coil Heaters are small section heating elements that can be shaped in small space which allows high wattage in small space .Heater are in round ,square or rectangular section .These Heaters are designed to work in most difficult condition giving very good heat transfer and good reliability.

Micro Tubular Coil Heaters are small section heating elements that can be shaped in small space which allows high wattage in small space .Heater are in round ,square or rectangular section .These Heaters are designed to work in most difficult condition giving very good heat transfer and good reliability.Coil Heaters can be given with Inner and Outer SSBrass sheath and cast in Aluminium or Brass material.

Micro Tubular Coil Heaters are small section heating elements that can be shaped in small space which allows high wattage in small space .Heater are in round ,square or rectangular section .These Heaters are designed to work in most difficult condition giving very good heat transfer and good reliability.

Mica Band Heaters are built in 'MICA' Insulation with 'L' type clamping and manufactured in M.S. Plated sheet or S.S. outer & Brass inner sheet. These heaters are the most economic & widely used for heating of moulds, dies, nozzles and barrels on all types of plastic processing machinery. Thin mica insulation provides excellent thermal conductivity by 'Conduction' and faster heating up and cooling down is possible. Maximum sheath temperature upto 480 degree Celsius. Maximum Watt density - 3 WSq cm to 3.5 WSq. cm. Plate, Strip, square, rectangular shape mica band heaters can be manufactured as per customer specifications in one or two piece units. Spot welded clamp bars & Allen screw clamping can be done like Ceramic Band Heaters

Voltage : 230 Volts / 415 Volts.

These heaters are the most economic & widely used for heating of moulds, dies, nozzles and barrels on all types of plastic processing machinery. Thin mica insulation provides excellent thermal conductivity by 'Conduction' and faster heating up and cooling down is possible. Maximum sheath temperature upto 480 degree Celsius. Maximum Watt density - 3 WSq cm to 3.5 WSq. cm. Plate, Strip, square, rectangular shape mica band heaters can be manufactured as per customer specifications in one or two piece units. Spot welded clamp bars & Allen screw clamping can be done like Ceramic Band Heaters

Voltage : 230 Volts / 415 Volts

Design consists of Nichrome resistance rbbon proecisely wound, evenly spaced on a Inorganic Mica Sheets which eliminates hot spot. Our exclusive Computer Softwate designing maximize the element ribbon coverage of the heated area, which results in uniform heat distribution. The resistance ribbon is carefully selected considering all aspects in the application to obtain maximum life of the heater. This ribbon wound mica foemer and insulated with mica sheets, which is then covered with SS/Brass sheets. APPLICATIONS    These heaters are suitable to apply heat by conduction to cylindrical surfaces-Injection & Blow Molding M/cs, Extruders, Dies, Drum Heating.

Voltage : 230 Volts / 415 Volts.

Low/Medium Watt Dencity Cartridge Heaters are manufactured in SS/brass tube. Resistance wire helical coil evenly stretched and strung through a steatite insulator ,MGO powder filled in remaining space inside the tube and insulator to increases thermal conductivity and life. Application:  Heating of Dies, Moulds, platens, Die heads, Packaging Machines, Sealing and Cutting Jaws.

High Density Cartridge Heaters are manufactured by special manufacturing technique. Heating coil wound around a ceramic core and isolated from SS/Incoly sheath by highly compressed layer of magnesium oxide powder . Because of exclusive manufacturing technique these heaters gives longer life copmare to other cartridge heaters and can be operated at higher temperature . Also it is possible to give more wattage in the small sizes. High Density Cartridge heaters can be supplied with built in Thermocouple Sencor and Distributed Watt Density Cartridge Heaters. Application:  Heating of Dies, Moulds, platens, Die heads, Packaging Machines, Sealing and Cutting Jaws.

This is a superior design to save power up to 30%. The Energy saving is achieved by using 2" thick ceramic wool blanket insulation from the outer surface of the heater. The overall outer diameter increases by 4". The low thermal conductivity of the ceramic biber keep the outher surface temperature up to 60° to 80° C, Which reduces heat losses to atmosphere.   SPECIFICATION AND TOLERANCES :  Reduce Electricity Bill Reduce Power Load   ADVANTAGES  Saving in energy up to 30% Uniform Heating Reduced preheating time of machine Cool Working atmosphere Increases productivity    

LowMedium Watt Dencity Cartridge Heaters are manufactured in SSbrass tube. Resistance wire helical coil evenly stretched and strung through a steatite insulator ,MGO powder filled in remaining space inside the tube and insulator to increases thermal conductivity and life.

Coil Type Nozzle Band Heaters are specially designed to prevent the failure of heaters against the leakage of plastic material at nozzle.These heaters gives higher temperature (above 250C) at nozzle point which is required for H.D. Plastics such as Nylon, ABS, Delrin. CONSTRUCTION Outer Sheath-SS Inner Sheath - Brass / Aluminum / SS Diameter-Min.25 MM Lenth-Min.25 MM Thickness-10/12 MM can be supplied with in built Temperature Sensor J or K type. More Life, Higher Temperature No failure Against leakage  

Ceramic Band Heaters are manufactured by using special ceramic insulation material ' Steatite ' and fabricated with stainless steel sheet. The heating coils is made of high quality Nichrome wires.The spot welded clamp bars, Allen screw clamping provides a uniform clamping. Ceramic Band Heaters are used for heating of moulds,dies,nozzles and barrels on all types of plastic processing machinery. Heaters having high watt densities provide high operating temperature, resulting into high productivity. Maximum sheet temperature up to 800 degree Celsius.

Voltage : 230 Volts / 415 Volts.

MICA STRIP PLATE HEATER Nichrome ribbon wound on mica former & insulated with mica sheet. which is then sheathed in MS Plated or SS sheet. CERAMICREFRACTORY PLATESTRIP HEATER Heating coil supported in Fluted Refractory insulaters & sheathed in SSMS Plated sheets. FINNED STRIP HEATERS Basically Finns of size 65mm*35mm are fitted tightly on the Heavy Duty Strip Heaters for fast transfer of heat to flowing air.

Length : 380 MM,457 MM,533 MM

Ceramic Band Heaters are manufactured by using special ceramic insulation material ' Steatite ' and fabricated with stainless steel sheet. The heating coils is made of high quality Nichrome wires.The spot welded clamp bars, Allen screw clamping provides a uniform clamping.Ceramic Band Heaters are used for heating of moulds,dies,nozzles and barrels on all types of plastic processing machinery.Heaters having high watt densities provide high operating temperature, resulting into high productivity.Maximum sheet temperature up to 800 degree Celsius.Maximum Watt density up to 50 Watts per Square Inches for the blower air cooling, the perforated ceramic heaters with cooling fins or without cooling fins can be manufactured as per customers specification. Ceramic Band Heater consist of a helically wound resistance coil made from Nichrome 80/20 wire, evenly stretched and precisely strung through a steatie insulating bricks forming a flexible heating mat. The Ceramic heating mat along with 6 mm thick ceramic fiber insulation is assembled in S. S 304 sheet with serrate edges providing maximum flexibility for easy installation.   APPLICATIONS  These heaters are sutable to apply heat by conduction to cylinderical surfaces-Injection Moulding M/cs, Plastic & Rubber Extrudgers, Dies, Drum Heating, Blow Moulding M/cs.

Voltage : 230 Volts / 415 Volts

Tubular heating elements embedded in aluminium alloy or Brass, providing uniform heat transfer and long life.The heater can be manufactured with cooling tubes for accurate temperature control.