Sensors Dealers in Alandi, Pune (67 products available)

• Type: ULTRASONIC FLOW SENSOR
• Brand Name: MFML
• Feature: Chemical Addition,Textiles,High-purity Chemical Dispensing,Water Addition,Fertigation,Dosing,Pump Protection.
• Place of Origin: Pune, Maharasthra
• Condition: Good
• Two Flow Range: 0.3 to 3.8 lpm and 3 to 38 lpm (0.1 to 1 gpm and 0.8 to 10 gpm).

Engineered specifically for small diameter applications, the Mfml Turbine Ultrasonic Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3 to 38 lpm (0.1 to 1 gpm and 0.8 to 10 gpm). The injection-molded PVDF body and ceramic bearings provide excellent chemical compatibility and long service in dosing and batching applications. Union piping and tubing connections along with removable NEMA 4X electronics allow for easy assembly and field replacing ability. The mfml Ultrasonic Flow Sensor can be used with DN8 (¼ in.), DN10 (3/8 in.) DN15 (½ in.) tubing or DN15 (½ in.) piping for simple installation. End connections of the Ultrasonic Flow Sensor are available in PVDF for hose barbs, fusion socket or IR/butt fusion, and in PVC for socket or NPT thread.Fields of Application -     Chemical Addition     Textiles     High-purity Chemical Dispensing     Water Addition     Fertigation     Dosing     Pump Protection  Advantages -     Connection to rigid pipe or tubing unaffected by mounting angles     PVDF & ceramic wetted parts provide superior chemical compatibility     Low and High Flow rate capability     Both clear and opaque fluids     Compatible with most flow instrumentation There are many different technologies used in the measurement of flow. The choice of the most suitable type depends on a wide range of factors including the nature and viscosity of the fluid, the flow rate range and the accuracy of measurement required. Types Of Ultrasonic Flow Sensor -     Differential pressure flow meters insert an obstruction in to reduce the flow rate and thus the pressure. Flow rate is calculated by taking the difference between upstream and downstream pressures.     Positive displacement flow meters capture a liquid sample in a small container and calculate flow rate by counting the number of captures and fills.     The rotor in turbine flow meters spins at a rate proportional to liquid flow rate.     Variable-area flow meters typically contain a float that is forced upward by the fluid passing through. The point of equilibrium between this force and that of gravity indicates the volumetric flow rate.     As a liquid or gas passes through the (usually) bent vibrating tubes of a Coriolis flow meter, the tubes twist to a degree proportional to the fluid’s mass flow. The deflection is measured by a position sensor.     Magnetic flow meters operate on Faraday’s law of electromagnetic induction and therefore work only with conductive liquids. A current applied to coils mounted on or outside the flow pipe generates a magnetic field inside the pipe. The liquid passing through generates a voltage proportional to flow rate, which is detected by electrodes on either side of the pipe.     Vortex flow meters measure flow by placing a bluff body across the stream. Flow rate is calculated by multiplying the pipe area by the flow velocity, which is proportional to the frequency of the vortices generated by the bluff body. These devices are used with liquid, gas, and steam.     Multivariable differential pressure transmitters, when attached to or integrated with a primary element, measure temperature and/or pressure and use these values to calculate mass flow.     Thermal flow meters measure mass flow directly. Some of these devices put heat into the flow stream and measure how long it takes to dissipate; others measure the amount of energy required to maintain a constant temperature in the stream. They are used for low flows, primarily gas. Details -     Insertion Type Flow Sensor : Differential Pressure Flow Sensors Insertion Type     Thermal Mass Flow Sensors : Vortex Flow Sensor     Turbine Type Flow Sensors : Ultrasonic Type Flow Sensor

Item Code: MS-Bi-Directional-Flow-Sensor Bidirectional Paddle flow switch use new structure, could monitor the flow by Two-way. It is operate by micro magnetic reed switch, it is normal Open, when flowing water push the paddle, the transfer structure change the switch condition, it close. This flow switch could be Anti Explosion-prrof. Specification: * Work Temperature: -30C – 150C * Max Pressure: 30bar * Output: 40W 250VAC/DC SPDT * Work Medium: water and oil * Pressure Loss: less than 0.01bar * Installation: 1”PT; Insert * Pipe Size: DN20~DN200 * Protect Grade: IP65 (GE-341C) * Explosion-Proof Grade: ExdIICT6 (GE-341B)

• Frequency: 50-60 Hz
• Output: Analog Sensor
• Material: Stainless Steel
• Voltage: 5-24 V DC
• Temperature Range: -25 to +70 Deg C
• Brand: Smart Sensors

Sensors for Molten Metal Temperatures, Manufacturer, Exporter, Supplier, Pune, Maharashtra, India PT- PT RH 13% TEMPERATURE TIPS of various types to suit Specific needs. Available in paper & porcelain bodies. With temperature tips defects arising out of incorrect pouring temperature such as blowholes, shrinkage etc is minimized. Pouring at correct temperature also saves electrical power and time to a great extent. A temperature upto 1750 degree centigrade of molten C.I. / Steel can be measure with this system within 4 to 5 seconds.

• Type: Water Level Sensors
• Material: Metal, PVC, Stainless Steel
• Application: Water Levelling
• Weight: 0-300gm, 300-500gm, 500-700gm, 700-1000gm
• Voltage: 0-15VDC, 15-30VDC
• Frequency: 50Hz, 60Hz
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric
• Feature: Non Conductive Liquid, Safety Interlocks, Suitable For Sensing Level, Visual Alarm System
• Warranty: 1yrs, 2yrs
• Ambient Temperature: 0-100deg C, 100-200deg C, 1600-3200deg C, 200-400deg C, 400-800deg C

Rtd 3 wire simplex dia-6mm l-600 ss304 12" bsp compression fitting. Application :- water & oil temperature measurement

• Type: Thermocouples, RTD
• Brand Name: Techtrol

We are an established manufacturer, exporter and supplier of Temperature Sensor   in Maharashtra, India. We offer Thermocouples, RTD’s, X’mitters and Thermowells Temperature Sensor that are reliable in performance and utility. Our product possess T, ,J,K,R,S,E,D,N,B thermocouples with PT100/500/1000 RTD’s. The thermowells are either are fabricated, flanged, barstock or screwed. The supplied product is widely used in furnaces, heat treatment, boilers and many industries. We duly test the sensors for quality and performance so that the buyers can rely on us.   Details : Thermocouples  - T,J,K,R,S,E,D,N,B RTD’s - PT100/500/1000 X’mitters - Input - Thermocouple /RTD O/P - 4-20mA Thermowells - Fabricated / Barstock / Flanged / Screwed Applications :  Furnaces, Heat Treatment, Boilers, Textiles, Sugar, Food & Beverage and almost all industries

The SFMc-150 Compact steam flow meter system is engineered to suit your requirement. It has no moving parts and no wiring connections are required during installation. The mass flow rate of Saturated and Superheated steam is calculated by measuring the differential pressure across the orifice plate and instantaneous density. Online density compensation is possible because of the online pressure and temperature measurement. In conventional system of measurement, the differential pressure generated by orifice plate is measured by DP transmitter. The output of from DP transmitter after square rooting is accepted as proportional to flow rate. This assumption is true only when the density is constant.

• Brand Name: Protocontrol Instruments

Protocontrol offers level sensor to be used in cement silos.it is a rf capacitanceadmitance type level sensor. The rf level switch operates on the basis of rf absorption. The electronic unit generates a sinusoidal wave, applied to the electrode creating a field around it. Rf environment absorption changes (electrical loss) around the electrode are reflected on the changes of generator supply current. Such changes caused by increase in level is amplified and used to actuate the relay. Special coat-guard amplifier is incorporated in the circuit, which will ignore the effect of deposition. The rf admittance type, point level switch, designed with special sensing probe, using special shield coat-guard circuit and three element probe. The level switch is immune to the material built-up on the probe and material bridging between the probe and hopper wall.

• Country of Origin: Made in India
• Connector: AMP
• Brand: Curtis
• Friction Torque: 0.20 Nm
• Max Axial Force : 1700 N
• Cable: 24 AWG

• Type: DAWN Photo Sensor
• Frequency: 0-10Hz, 10-60Hz
• Application: Camera
• Features: Durable, High Work Capacity, Fast Response Time, Easy To Install,Long Sensing Distance
• Power Supply: Electronic
• Weight: 0-100Gm 100-200Gm
• Color: Black ,Blue, Red, White
•  :  

• Blue: White

These meters are based on the principal of differential pressure generated by Orifice element. Designed as per ISO5167/BS1042. On line density compensation delivers very accurate results. Various Types of IBR/Non IBR valves for isolation and drain. Various Sizes of Orifice Assemblies with or without IBR Certificate. Complete System is Engineered to suite your requirements. Highly Reliable and Repeatable System; No Moving Parts. Easy for Calibration.

• Type: Proximity Sensors
• Material: Stainless Steel
• Color: Silver
• Condition: New
• Power Source: Electric
• Sensing Distance: 2 - 200 mm
• Features: Durability, Optimum performance

• Features: Duct mounted , Excellent linearity, Good long term stability, High reliability, Wide sensing range, Easy installation.
• Output: 4
• Accuracy: 2%,3%,5%RH
• Long Term Stability: 1%RH per year
• Current Consumption: DC 70mA Max,AC 190mA Max
• Item Code: H7080B
• Power Supply: 24 VAC +/-15% /24 VDC +/-10%
• Current Output Load: 500 Ohms Max
• Voltage Output Load: 10K Ohms Min

The Ultrasonic level sensors of the Series SW 3051 are very useful for sensing high levels (up to 20 meters.) of liquids or slurry material. The sensor gives a 4-20 mA output signal to the controller and operates relays at preset high and low levels. Probes are available forsensing water levels of 5101520 meters.

A NEGAVEEZ PIR Occupancy Sensor offers security and convenience in the areas that they cover. Occupancy sensor is an intelligent device which detects IR Rays emitted by Human Being and controls the ON-OFF operation of electrical loads. Electrical Loads can be Lights, Fans, AC for Energy Saving Application or Siren, Buzzer, Feedback to Home Automation Controller along with Lights for Security Application. This highly sensitive Sensor Element detects human movement within its detection area and automatically turns the load ON. The Loads are kept ON till the Human Movement persists in the room. The Loads are turned OFF after preset time delay if no movement is detected within the set time It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient system along with security.   Operating voltage range: 140V AC to 270V AC Overvoltage/Under voltage protection DC 12 V/24 V versions are also available*** PIR Sensor: Highly Sensitive Quad Element Pyro Electric Sensor TIME Setting: Built in Re-triggerable Timer setting between 30 sec to 30 minutes from the last movement detection LUX setting: Additional Photo Sensor (Ambient Light Sensor) to select the control of electrical loads during DAY Light, PARTIAL Light and NIGHT condition. Current capacity: 5A/ 1000 W- Resistive load, 200 W of Fluorescent Tubes/LED Light load, For AC Control Use Additional Contactor of Suitable Rating Sensor warm-up time: 1 Minute Sensing angle: 360 degrees Sensing distance: 4-5 Meters Operating Temperature: -10oC to 50oC Protection class: IP25 Enclosure is protected from environmental conditions that are water and dust. EMI protection: Protection against electromagnetic interference noise caused by cell phones, TV, tuners, audio players. Over Current & Short Circuit Protection by an external replaceable fuse In built Protection circuit for lighting loads Provision for Dry Contact Output Terminal available RELAY- NO/NC/COMMON Contact available outside***

• Active area: 20mm x 30mm
• Detector Technology: CMOS Sensor with Structured Micro Columnar Fiber Optic Scintillator
• Sensor Dimensions: 36mm x 26mm x 5mm with rounded corners
• Pixel Resolution: 1050 x 1580 pixels
• Pixel Size: 19 microns X 19 microns
• Sensor Resolution: >20 line pairs/mm
• Interface: USB 2.0 High Speed

As per our research in dental radiology, we are proud to introduce the indigenously designed, developed and manufactured digital dental RVG Sensor OraDect. Evolve is India’s first and only indigenous manufacturer of the ETS3107-DDX series of oral detectors (RVG Sensors) for dental clinics, dental surgery and endodontic treatment facilities. Evolve’s OraDect Pro DDX 1500™  RVG Sensor brings together advanced technology and extreme reliability to provide exceptional value and maximum return on investment.

• Type: RTD
• Color: Any
• Brand Name: surya Industrial Products
• Usage/Application: Industrial
• Material: SS 304/316
• Model Name/Number: PT 1000
• I Deal In: New Only

• Supply: 24 VDC
• Output: PNP/NPN Type
• Dimension: 3/8 x74 mm
• Mounting Material: Polysulphone

- Superior Sensitivity of 0.5pF is standard - Maximum Reliability and Calibration Stability - Automatic Material Build – Up Immunity - Universal Power Supply Available - Liquid and Slurry Applications Jayashree RF capacitance sensors offer cost-effective, reliable point level monitoring and provide with the most affordable solution for your applications. These RF capacitance probes are designed to provide a high level of sensitivity, stability and durability for powder and bulk solids applications, as well as liquid and slurry applications and is backed by two years warranty.    

• Temperature Range: -200 to 600 deg C
• Application: Industrial
• Accuracy: Class A
• Sensor Connection Wiring: 3 Wire
• Brand: Radix
• Termination Type: Terminal Head Assembly
• Process Connection Type: Threaded (NPT/BPT)
• Probe Material: Aluminium
• Probe Diameter: 8 - 20 mm
• Probe Length: 150 - 300 mm
• Material Grade: SS316

• Type: M18 and M30
• Brand: Sick
• Material: SS
• Sensing Range: Up to 10 mm flush
• Monitoring range: 6 to 12,000 pulses/min
• Cap Material: Plastic

We are renowned as an eminent manufacturer, retailer, wholesaler and exporter of excellent of Dental X Ray Sensor Pod Eagle I X S Handy. Dental X ray sensor with Tab / window mobile. No need to connect to Computer acquire and display image on TAB / window mobile.

We are known as the renowned Manufacturer and Supplier of Temperature Sensors. These Temperature Sensors are available in diverse shapes and sizes as per the requirements of the clients. These Temperature Sensors can be availed from us at economical prices. The Temperature Sensors are available in different flanges and have varied applications considering pressure in Mild Steel, Carbon Steel and Stainless Steel. Types of Thermocouples (in simplex, duplex and templex) 'K' (Chromel-Alumel)T (Iron-Constantan)T (Copper-Conslantan)'E' (Chromel-Constantan)'R' (Pt-Pt-13%-Rh)'S' (Pt-p 10% Rh)'B' (Pt-13%-Rh-Pt-6%-Rh) Types of Insulations : Ceramic and mineral Types of Junctions GroundedUngrounded (Isolated) Types Of Sheaths Mild SteelSS - 304SS - 316SS 31SS - 446Inconel - 600Inconel - 800TitaniumCast Iron NickelCeramic (610)Re-crystallized Alumina (KER- 710) We Offer Mounting Accessories Thermocouple and RTD connectorsBSP/NPT/UNF/Metric threaded Male Female adjustable ferrule fitting in Mild steel/stainless steel 304-316/Brass

• Ball diameter: 5mm,6mm, 8mm
• Usage: Position Sensor
• Material: Stainless Steel
• Minimum Order Quantity: 1 Number

• Brand Name: Sensoheat
• Temp. Range: -200deg to 800deg C
• Accuracy: 0.5%
• Probe Diameter: 0.5
• Usage/Application: Industrial
• Length: 1000 mm

Element (Type) Fe-Const. (J), Cr-Al (K), Cu-Const.(T), Cr-Const.(E), NiCrsil-Nisil(N) Range 200 to 1000ºC Element form Simplex Duplex Sheath Material SS 304304L,316316L,310, etc Cable Insulations Teflon Fiberglass SS Braiding Color Coding As per IEC, ANSI etc.

air flow sensor, Flow Meters, Gas Meter