Photocell Infrared Sensor
8,499 Per Piece
10 Piece (MOQ)
Diaphragm Level Sensor
Get Price Quote
We are highly experienced Manufacturer, Exporter and Supplier of Diaphragm Level Switch. The Diaphragm Level Switch is used for indicating, controlling, and regulating the level of granulated or powdered dry materials with a grain diameter up to 10 mm and a density of 0,3 to 2, 5g/cm3, flowing through a silo, hopper or chute. We offer superior Diaphragm Level Switch that is made up from quality material with perfect finishing. Known for its flawless features, Diaphragm Level Switch is highly in demand among our customers. Operation The device must be mounted so that the diaphragm membrane is exposed to the product whose level should be controlled, in such a way that the product, can press the diaphragm. The material weight presses the diaphragm which is adjusted with the microswitch through a flexible mechanisum. A liver attached to the diaphragm transferrs the pressure to the microswich which changes the contact. When the material recedes the diaphragm comes back to its normal postion and the microswitch again changes the contact. Technical Specifications Normal sensitivity - 100 gm / 400 gm Diaphargm Membrane material - Nitrial Rubber / SS ax. Work ambient temperature - 60 Deg Microswitch contacts - 15 Amp, 230 V AC, Potential free Cable Gland - PG 11 Housing - Cast Al Protection - IP 40 Installation and Mounting The JAYCEEBOOT can be installed outside the container by making a hole on the wall, so that the membrane remains exposed to the product inside. Suspended by means of a tube, it can be also installed inside the container. Using adaptors, it can be installed in pipes and conduits. Wherever possible level switch should be mounted on vertical surfaces. By this means, the product can flow free downwards, and wrong indications are avoided. It can be mounted on surfaces with a slope of not more than 30 degrees from vertical, provided that the product leaves the membrane thoroughly free when flowing along. If maximum levels are to be controlled, the devices must be mounted at such a height that the product overflowing the membrane can exert pressure on this membrane, working the microswitch.
Best Deals from Sensors
Online Turbidity Sensor
125,000 Per Piece
1 Piece (MOQ)
carbon dioxide sensor
37,000 - 150,000 Per Piece
1 No (MOQ)
Engine Coolant Float
Get Price Quote
HC-SR04 Ultrasonic Proximity Sensor
100 Per Piece
10 Piece (MOQ)
Radar Sensor
Get Price Quote
1 Piece (MOQ)
R-Gage Series Radar SensorAdjustable Field; Outputs: Bipolar: 1 NPN; 1 PNPSupply Voltage:12-30 V dcRange: 2.0 - 24m; Euro 5-pin Integral Connector
Bosch Fly Wheel Sensor
2,000 Per Piece
10 Piece (MOQ)
Motion Sensor
550 - 1,350 Per piece
Pressure Sensor
Get Price Quote
100 Piece (MOQ)
A device based on piezoelectric principal with (Ceramic Sensor) to give proportionate output with respect to increase / decrease in pressure. The device has option for two built in switch output. The same device is suitable for 12V and 24V.
Conductivity Sensor
10,000 Per Piece
1 Piece (MOQ)
Eectronet series CS-001 are Conductivity Sensors designed for fast, easy and trouble free start up. These are ideal for measuring the concentration of dissolved solids in water. They are provided with an accurate pre-determined factory calibration constants. Rugged design and corrosion resistant material keep electrode spacing and surface area constant so cell constant remain stable for long period. Durability of material and high resistance to corrosion ensures the long life and require low maintenance. Key Features; Accuracy +/-2% F. S. Available with 1 / 0.1 / 0.01 Cell Constants In-built Auto Temperature compensation through PT-100 RTD sensor upto 150°C Suitable for online conductivity / TDS measurement A Robust Two-electrode Design Minimize Start-up and Installation Time A factory-measured cell constant ensures the best accuracy and no initial calibration requirements
Steam Flow Meter
Get Price Quote
Micro Switch
Get Price Quote
100 Piece (MOQ)
MODBUS VIBRATION SENSORS
17,750 - 17,751 Per piece
5 P (MOQ)
Pick To Light Sensor
4,100 Per Piece
1 Piece (MOQ)
Advantages: Increases the pick rate productivity, Optimizes the accuracy in order picking Cost efficient for labor intensive process. Applications: Faster and accurate picking Sorting Full Order picking Poka Yoka system Industries: E Commerce warehouses Order fullfilment centers Production centers USP Simple Plug n play design, Easily identifiable light to direct operator. Features: Limited skill training of picker Paperless picking to increase efficiency Reduces operation cost Simple and Reliable picking Automated troubleshooting for any wrong pick Light Guides Picker To The Location: Pick to light uses bright light to tell the user which bin to pick from. Additionally, quantity to be picked is displaced in the LED screen. Pick to light then verifies correct pick by inbuilt sensor or touch button. If incorrect pick is made device alerts the user Pick to light can also inform the system if the bin is getting low in quantity.
Gear Flow Sensor
Get Price Quote
1 Piece(s) (MOQ)
Gear Flow Sensor, which we make available, is ideal flow meter for oils, grease, fuel, solvents, polyurethanes, brake fluid, Skydrol and other non-abrasive lubricating fluids, such as in the process of measuring cylinder position in engines. These Gas Flow Sensors are manufactured in compliance to the set industrial standards.Features - Flow ranges from 0.003 to 120.0 GPM Accuracy up to 0.1% of reading Pressure rating up to 5,000 PSI Aluminum, 303 and 316 stainless steel bodies Pulse, mA and Voltage sensors available Bi-Directional flow capabilities Six different flow ranges available
PIR Motion Sensor Switch SM04
750 - 2,100 Per Piece
1 Set(s) (MOQ)
Temperature Sensor
620 Per Piece
HIGH PRESSURE FLOW SENSOR XP
Get Price Quote
XP is a Full Bore SS body Turbine Flow Sensor suitable for High Pressure water and oil application. Turbine flow sensor is a combination of freely rotating turbine assembly; SS housing and solid state pick-up tungsten carbide- Ceramic bearing makes it practically frictionless producing large linear range. Detachable square wave generated pick-up assembly is much advance solid state device to give output at noisy industrial environment. Variety of matching controllers and indicator are available suitable to match different electronic requirements.
Sensors
Get Price Quote
Range:0~14 pH, Body:Epoxy with Glass Bulb, Type :Combination, Pressure:5 Bar,Junction:Double Junction Ceramic, Process Connection:½” & ¾” BSP Male. Mounting :Pipeline mounting. Cable Length:5 Meter with BNC connector.
Laser Optical Displacement Sensor
54,000 Per Piece
Photoelectric Sensor
Get Price Quote
We are offering photoelectric sensor. Laser diffuse range: 300 mm; input: 10-30 v dc outputs: bipolar: 1 npn; 1 pnp connection: euro m12 5-pin integral connector
Wall Mounted Motion Sensor
750 Per Piece
100 Piece (MOQ)
Motion Sensor with Timer and Sensativity Settings.
Thermocouple Sensor
500 Per Piece
vision sensors
Get Price Quote
Flexibility and versatility of image based part verification is a must for many users today. VeriSens® is the ideal component. As a complete image processing system, it includes all necessary hardware and software. It can be configured intuitively using a PC.
Pressure Sensor
Get Price Quote
10 Piece (MOQ)
TrueSense Sensors
Get Price Quote
Description Available Sensors: Beam Detector Glass Break Sensor Vibration Sensor Motion Sensor Shutter Sensor Door Sensor LoRa Sensor 5D Sensor PIR sensor Intelligent Temperature Sensor General Feature List * Features are indicative and may not be available in each model. • Beam Detector – Beam Detector use invisible light to scan a defined area.• Glass Break Sensor – Glass Break Sensor is used for detecting glass vibration and breakage.• Vibration Sensor – Vibration Sensor recognizes movement or vibration.• Motion Sensor – Motion Sensor detects the movement of human body automatically in the detection area.• Shutter Sensor – Shutter Sensor senses automatically the opening of the shutter.• Door Sensor – Door Sensor able to monitor and detect theft.• 5D Sensor – 5D Sensor is designed specially for intrusion detection.• LoRa Sensor – Wireless Door Magnetic Sensor & Wireless Smoke detector based on LoRa technology.• Intelligent Temperature Sensor – Intelligent Temperature Sensor monitors ambient temperature of room, lobby, closed area.
water motor sensor
Get Price Quote
We are working with a group of professionals who make special emphasis on the products packaging and ensure that the material is procured from the reliable sources only. In order to ensure product compliance with stated quality norms, we conduct several tests at several stages. Details : Power ON LED : It indicates the power supply to the unit. Motor ON LED: It indicates the motor ON and Off Condition Tank Level Indication LED: Two level visual indications – 25% (Low Level), 75% (Tank full level). Motor will automatically switch ON when the water level in the tank is low and automatically switch OFF within 1 second when the tank becomes full. Manual Mode: Helps to switch ON the motor manually. In this mode, the motor will be running till the tank will be full . The product having special features of two relays for submersible Pump. one for starting capacitor and other for running capacitor. The three sensor electrode indicates the water level of the tank. Helps in preventing overflow of water from the overhead tank Input Voltage- 230V to 275 V(AC) Output Contacts-2 NO Long Life Easy to install
Single Infrared Beam Sensor
Get Price Quote
We are capable of catering to the customers situated anywhere and we are located in Pune(India). We make available different payment options to suit the convenience level of the clients. We entertain both online and offline payment processing methods for the convenience of our customers. Features: Advanced technology Superior components QC tested & long lasting
Rtd Temperature Sensor
Get Price Quote