Testing Equipment Dealers in Pirangut, Pune (22 products available)

A precise and reliable machine. Sturdy in construction. Precisely machined to International Standards. Fitted with angular Drop arrangement- for checking transport-worthiness from all angles. Costs less than half of the similar imported tester- saves valuable foreign exchange too. Facility to corner drop.

• Accuracy class: 0.5% (Optional 0.2%)
• CT burden: less than 0.5 VA

Power Line Transducers And Multifunction Meter are suitable for measuring electrical parameters like AC voltage, current, frequency, PF, KW, KVAR and also for DC signal isolation. They are best suited for MCC and PCC panels, AMF panels, SCADA systems, PLCs for data acquisition and metering. Rugged to withstand harsh environments

• Type: GPS DATA LOGGERS
• Brand Name: RACELOGIC LTD UK
• Material: SOLID
• Color: Blue
• Warranty: 1 Year
• Country of Origin: UK
• Connectivity: Wired
• Antenna Type: GPS

vbox3i dual antenna (vb3isl) is racelogic’s most powerful gps data logging system. by utilising two gps engines configured in a ‘fixed baseline rtk setup’, the vb3isl combines high-level accuracy and test repeatability with the ability to measure slip and pitch/roll angles at 100hz. enabling users to intuitively measure set parameters during acceleration, deceleration, braking, abs and esp testing, handling and many other types of high dynamic tests, vb3isl combines a system renowned for accuracy with the ability to record data via additional parameters to a single unit. as with previous vbox models, vb3isl is compatible with all existing peripherals; including multifunction display, 16bit analogue input, 4 channel frequency and pulse counter input module, 8 channel thermocouple interface and yaw rate sensor. included within the vbox3isl package is vbox manager. a device enabling you to change the dynamic modes and filter settings shows real-time graphs of speed against time, setup slip angle data and calculate antenna locations. features- non-contact 100hz speed and distance measurement using gps + glonass  simultaneous measurement of slip angle, pitch/roll angle, yaw rate, true heading, lateral velocity and longitudinal velocity  very low latency: 6.75ms  4 x 24bit differential analogue input channels with ±50v input range and synchronous capture  brake/event trigger input at 10ns resolution.  2 x can bus interface for data input & output  rs-232 serial interface  bluetooth interface  audio voice tagging  microphone headset included  data logged to compact flash memory card  2 x 16bit user configurable analogue outputs  2 x digital outputs  user configurable logging conditions  logging rate selectable to 100hz, 50hz, 20hz, 10hz, 5hz, 1hz  wide 7v to 30v operating range  low current consumption  usb interface

• Application: Control Panels
• Frequency: 45Hz
• Operating Current: Double Phase
• Warrenty: 1year
• Temperature Capacity: High Temperature
• Features: Easy To Use

kat controls spark tester consists of a high voltage electrode unit and an electronic control unit which has a highly reliable solid state structure and requires minimal maintenance. ball chain assembly used in h.v. Electrode unit which is in direct contact with some surface of the cable under test and combines with the resulting corona in h.f. Spark testers to form an extremely effective contact zone around the cable insulation. this unique feature ensures that the actual voltage displayed on kv meter is applied accurately and consistently to the cable surface even if the bead chain do not touch the cable from all sides. A pre-adjusted and extremely sensitive fault detection circuit detects all the faults (pin holes) in the cable insulation at proper voltage setting. These spark tester are able to detect all the faults which are otherwise detected in water immersion testing of cables. the interlock with the electrode unit cover protects the operator from accidental contact with the electrode.

– Light weight burner for shorter camping trips– Made from Brass and works on regular off the counter spirit (Methanol) and Propanol– Measures : 90mm (diameter of burner) x 60 mm (height)– Holes on the base increased the efficiency of combustion– The lid on top is can be used for extinguishing the fire as well as to regulate the flame.– 100ml of alcohol burns for 30 minutes– After use the burner can be closed and carried with alcohol still in it as it doesn’t leak– Comes with a wind resistant stove top– Ideal for camping, fishing and hiking trips– Weighs 200 grams (6 oz)

Road Test/Measuring Equipments.A small unit with suction cup contains a light sensitive sensor as well as signal processing circuitry. The sensor responds only to a sudden increase in light intensity which will occur when the brake light comes on. Slow changes of light intensity will not trigger any start signal. Direct sunlight is shielded off by the black suction cup. In short: With the test start unit sticking on the stop light, a sudden increase of light intensity inside the brake light case will generate a short pulse which is recognized by the system as closure of a normally open contact � like a pedal switch contact.MountingMake the suction cup stick to the car�s brake light such that it intercepts the brake light�s rays. In case the stop light glass should be very much curved or rounded, an adhesive tape may be used in addition. A dark adhesive tape may also increase light contrast registered by the sensor. Make sure the connecting cable is firmly attached to the car body by means of adhesive tape. Lead this thin cable to inside the car through the padding rubber of the car�s door. Connect the cable to the�BRAKE� or �ext. START/STOP� connections of the Peiseler test system.Road Test Equipment Testing Solution for Speed Acceleration Braking distance Braking time Distance traveled Test time RPM Fuel Consumption Wheel Slip Monitoring of transportation.

• Type: Line Testers
• Material: Aluminum, Fiber, PVC
• Application: Magnetic Detecting
• Color: Black, Brown, Grey, Silver, White
• Voltage: 110V, 220V
• Power Source: Electric
• Feature: Light Weight, Saving Power, Sensitivity Adjustment, Good Quality

• Features: High efficiency , Maintenance free , Simple usage, Rugged structure ,Longer working life , Competitive rates.

• Features: Offset/gain controls,Self contained globally compatible power supply,Integral summing amplifier for thickness output
• Power Supply: 85-265 V AC
• Accuracy: 0.02% FSR RMS
• Interface: 2.0 USB

peak pulse current meters, soft ferrite cores

Universal Programmer, embedded systems

Non destructive testing Equipment, Magnetic Crack Testing Machine, Mesh Belt

seed testing, Hybrid Watermelon Seeds, Hybrid Maize Seeds

test services, Noise Monitoring Station, LITE Noise Monitoring Station

Data Acquisition Systems

Test Probes, adaptor caps, indicator boxes, magic boxes

Thermal Energy / BTUMeter, High Temperature Flow Switch

engine testing equipments, Test Bed Instrumentation Systems

Testing Instrument, electronic engineering pump, Water Treatment Machines

motor testing equipment, Robotic Automations Control System

Flow Meters