ZEN MICROSYSTEMS Bavdhan, Pune, Maharashtra

VCI-MUXDIAG-3 is a compact multi-protocol communication interface particularly suited to the analysis and diagnosis of the electronic architectures equipping the most recent vehicles and mobile machines. It allows to interface, via a USB2.0 high speed link, a PC-type computer to communicating systems and networks of systems. It offers: 1x CAN FD / High Speed channel 1x CAN FD / High Speed or CAN Low Speed channel 1x Ethernet (DoIP) or BroadR-Reach® channel 1x LIN channel + 1x LIN or ISO9141 K/L channel

vbox3i dual antenna (vb3isl) is racelogic’s most powerful gps data logging system. by utilising two gps engines configured in a ‘fixed baseline rtk setup’, the vb3isl combines high-level accuracy and test repeatability with the ability to measure slip and pitch/roll angles at 100hz. enabling users to intuitively measure set parameters during acceleration, deceleration, braking, abs and esp testing, handling and many other types of high dynamic tests, vb3isl combines a system renowned for accuracy with the ability to record data via additional parameters to a single unit. as with previous vbox models, vb3isl is compatible with all existing peripherals; including multifunction display, 16bit analogue input, 4 channel frequency and pulse counter input module, 8 channel thermocouple interface and yaw rate sensor. included within the vbox3isl package is vbox manager. a device enabling you to change the dynamic modes and filter settings shows real-time graphs of speed against time, setup slip angle data and calculate antenna locations. features- non-contact 100hz speed and distance measurement using gps + glonass  simultaneous measurement of slip angle, pitch/roll angle, yaw rate, true heading, lateral velocity and longitudinal velocity  very low latency: 6.75ms  4 x 24bit differential analogue input channels with ±50v input range and synchronous capture  brake/event trigger input at 10ns resolution.  2 x can bus interface for data input & output  rs-232 serial interface  bluetooth interface  audio voice tagging  microphone headset included  data logged to compact flash memory card  2 x 16bit user configurable analogue outputs  2 x digital outputs  user configurable logging conditions  logging rate selectable to 100hz, 50hz, 20hz, 10hz, 5hz, 1hz  wide 7v to 30v operating range  low current consumption  usb interface

Type : GPS DATA LOGGERS

Brand Name : RACELOGIC LTD UK

Material : SOLID

Color : Blue

Warranty : 1 Year

Country of Origin : UK

Connectivity : Wired

Antenna Type : GPS

consistency at the wheel. The system consists of dual 1080p cameras, allowing for a main view with embedded picture-in-picture. The lenses are wide angle, ensuring that every moment of track action is captured in stunning high definition – so analysis in Circuit Tools is now even more precise. Video is recorded at 30 frames per second, to SD card or USB flash drive.   Graphics are overlaid in real time – also in high definition. With the high resolution afforded by the 1080p output, this gives the user great scope for fantastic dashboard and gauge layouts. The graphics are fully customisable but several default scenes are available. An app for Android and iOS devices connects via the VBOX Video’s inbuilt WiFi to allow fine-tuning of camera orientation, with real time camera output being displayed on the mobile device’s screen.   By default, the system will start and stop logging according to GPS speed. With the addition of the video pre-buffer, this allows every moment of track action – including race starts - to be captured automatically. Optional remote start/stop logging is taken care of via a Bluetooth unit that can be conveniently mounted next to the driver. An internal battery allows the current file to be correctly closed should power be lost during recording, ensuring that no data loss or corruption occurs. VBOX Video HD2 represents the very latest in cutting edge technology within the VBOX Motorsport range, giving you a competitive advantage no matter what level of motorsport you compete in.

The VBOX Touch features a 10 Hz GPS receiver, responsive colour touchscreen and the ability to run multiple applications on the same hardware. Built on a platform that allows functionality to be expanded through future software and firmware upgrades, the VBOX Touch is an extremely versatile data logger. Applications are written in Python script enabling users to create their own, including custom CAN Based applications to solve specific testing needs. New applications can be loaded by inserting an SD card containing the new script and it is just as quick to revert to the standard functionality of the VBOX Touch, by inserting the SD card containing the original data. Other features include the ability to connect to a vehicle’s CAN Bus, capture screenshots and see live test results.

Application : Bikes, VEHICLE BRAKE TESTING

Color : Blue

Warranty : 1yrs

Country of Origin : UK

  waterproof, battery powered 10 Hz GPS data logger designed primarily to measure performance or lap times.        

Material : Plastic

Color : Blue

Feature : Light Weight, Waterproof

Pattern : Plain, Printed

Country of Origin : UK

The VBOX II SX Range VBOX II SX (RLVB2SX) is a powerful instrument used for measuring the speed and position of a moving vehicle. It is based on a new generation of high performance satellite receivers, and will measure acceleration, braking distances, lap times, cornering forces and more. Due to its small size and simple installation, VBOX II SX is ideally suited for use in cars, bikes, off road vehicles and boats. With 5Hz, 10Hz, and 20Hz GPS update rate options available, the range suits a variety of requirements and budgets. All units are compatible with the DGPS Basestation for positional accuracy to

The USB-MUXDIAG-2 (Evo) is a compact communication interface which is particularly well suited to the vehicle environment. It has 1 CAN High Speed or Low Speed link, 1 CAN High Speed link, 2 ISO9141 links, 2 LIN links and 2 ANA/DIG inputs. The range of pinout options on the 16-channel, "OBD" SAE J1962 connector, controlled by the allocation of the non-standardized channels, is covered by several versions of the AMUX-AEE adapters, each of which is tailored to the various manufacturers: PEUGEOT, CITROEN, RENAULT and FORD.    

The RLACS272 Tyre Temperature Sensors have been specifically designed to measure the highly transient surface temperature of a tyre, providing invaluable information for chassis tuning and driver development. Each sensor can measure up to 16 temperature points on an object with surface temperatures ranging from -20 to 300° C.   Features  Log tyre temperatures throughout track sessions  Up to 16 temperature points per sensor  120° and 60° field of view options  Pre-configured tyre temperature VBOX Video HD2 scene to get you up and running  CAN Bus data output

Country of Origin : UK

Type : Temperature Sensors

Application : Temperature Scaling

Color : Black

Voltage : 15-30VDC

Driven Type : Battery, Electric

Warranty : 1yrs

Ambient Temperature : 0-100deg C, 100-200deg C

Automation Grade : Automatic, Manual

Indication Rating : Flow Rate, Total Flow

The RACELOGIC Steering Wheel Sensor is designed to accurately measure a vehicle’s steering angle or torque in tests such as ECE R79, ISO 4138 and ISO 7401. It has a CAN interface, which means you can connect the sensor directly to the VBOX 3i Data logger. The sensor is light and compact, with high dynamic response and a fine resolution of steer angle (0.1°). Easy access push buttons make it quick and simple to zero the steer angle and torque, once mounting is complete. Existing steering wheel functions, such as vehicle control elements, will not be affected when using the Steering Wheel Sensor. A universal steering wheel adapter is also included, making it quick and easy to mount to any vehicle, without having to remove the actual steering wheel.   Features: • CAN Bus output – connects directly to your DAQ (such as the VBOX 3i) • Ideal for tests such as ECE R79, ISO 4138 and ISO 7401 • Steering torque range ±20‐200 Nm • Steering angle resolution 0.1° • Can be calibrated to ISO 17025 standard • Quick and easy to install - supplied with a universal mount • Does not interfere with the vehicle’s steering wheel controls

with over 10 years of worldwide operation the vehico steering robots enjoy an increasing popularity. from the beginning very much appreciated by our customers was the fact that the vehicle's own steering wheel does not have to be removed. thus, the engine control units are not confused by the lack of a steering wheel and the airbag deployment remains ensured. and we could realize an unbeatable short installation time. and if you care about drivers safety: there are no disturbing or safety-critical structures between the steering wheel and the driver. the vehico steering robots can execute highly dynamic steering accurate and repeatable in any test vehicle. typical applications are sideslip tests according to fmvss 126/ece r13-h, fishhook, autonomous driving or rollover testing.   key features: • no special steering wheel necessary • no safety-critical structures between steering wheel and driver • steering torque measurement • quick and easy installation • intuitive scripting language • gps-based automatic track control • record and replay • online mode • obd2 interface • combinable with all vehico robots • unique price / perfomance ratio       typical applications: • esc: fmvss126 / ecer13-h • fishhook • iso lane change • euroncap aeb testing • tire testing • embankment rollover • autonomous driving projects

Type : Pressure Sensors

Material : Plastic

Application : Automobile Use, Industrial Use

Color : Black, Blue, Red, White

Condition : New, Used

Power : 15w, 20w, 25w

Warranty : 1year, 2years

Alarm Range : 1.5mtr, 1mtr, 2.5mtr, 2mtr

Racelogic’s Performance Box Touch measures Speed, Lap & Split Times, Delta-T, acceleration, deceleration as well as distance and more. All these parameters are logged to an SD card ten times per second and can be viewed on screen and analysed in detail using the VBOX Test Suite or Circuit Tools software provided.

Type : Infrared Temperature Sensor

Material : Metal, PVC, Stainless Steel

Application : Passive Infrared

Color : Black, Brown, Dark Brown, Grey, Light White, White

Voltage : 0-15VDC, 15-30VDC

Frequency : 50Hz, 60Hz

Power : 0-5W, 5-10W

Driven Type : Battery, Electric

Feature : Non Conductive Liquid, Reservoirs Hoppers, Safety Interlocks, Solids In Storage Tanks, Suitable For Sensing Level, Visual Alarm System

Warranty : 1yrs, 2yrs

Ambient Temperature : 0-100deg C, 100-200deg C, 1600-3200deg C, 200-400deg C, 400-800deg C, 800-1600deg C

Automation Grade : Automatic, Fully Automatic, Manual, Semi Automatic

Indication Rating : Flow Rate, Total Flow

inertial navigation system - vbox3i s technical specifications gyroscopes (angular rate sensors)* dynamic range: ±450°/s nonlinearity: 0.01% fs resolution: 16 bit adc (0.014°/s) bandwidth: 50 hz noise density: 0.01 °/s/√hz bias stability: ±0.003 °/s bias repeatability (1 year): 0.2 °/s   accelerometers* dynamic range: ±20 g nonlinearity: 0.1 % fs resolution: 16 bit adc (0.15 mg) bandwidth: 50 hz noise density: 60 µg/√hz bias stability: 15 µg bias repeatability (1 year): 0.005 g

Type : GPS DATA LOGGERS

Application : VEHICLE BRAKE TESTING

Feature : Accuracy,Easy Insatallation,Easy To Use

Warranty : 1year

Country of Origin : UK

based on a range of high accuracy gps engines, vbox speed sensors offer the ultimate non-contact measurement solution. with 5 hz, 10 hz, 20 hz and 100 hz gps update rate options available, the speed sensor range suits a variety of budgets and requirements. the 10 hz, 20 hz and 100 hz gps units are also compatible with the dgps base station for increased positional accuracy. the 100 hz speed sensor and the base station track the russian glonass range of navigation satellites as well as the normal gps constellation, using almost twice as many measurements for accurate results and reception in areas of poor satellite visibility. vbox speed sensors are perfect for automotive testing, motorsport, marine, telematics, and data logging applications. the ip66 rating means that each unit is water and dustproof, allowing them to be used in a variety of conditions. data output is via can bus, offering easy integration with data loggers and testing applications. each speed sensor also features analogue and digital outputs. the analogue output can be assigned to vehicle speed, lateral acceleration, longitudinal acceleration, or lap beacon marker with user selectable scaling. the digital output can be configured as either a digital speed pulse output or a lap beacon marker.   features  high performance gps receiver (5 hz – 20 hz), gps/glonass receiver (100 hz)  can bus output of position, velocity, distance, time, heading, height, vertical velocity, longitudinal and lateral acceleration, trigger to zero distance, trigger time, trigger speed, radius of turn  rs232 serial output of nmea*, position velocity and time  user configurable analogue + digital outputs  virtual lap beacon output  compatible with dgps basestation*  rugged deutsch asdd autosport connector  high quality aluminium enclosure  ip66 rated: water + dustproof  wide 6.5 v – 30 v operating range and low current consumption  

Type : Speed Sensor

Application : Speed Reading

Color : Blue

Condition : New

Warranty : 1year

navigation, motion & heave sensing   ellipse inertial sensors provide outstanding orientation and position data in a small, light-weight, and rugged enclosure. incredibly versatile, you can connect your own gps or use the internal one, connect an odometer, receive differential gps corrections, etc. a little larger, the amazing ellipse-d completes this state-ofthe- art product line. it integrates a survey-grade l1/l2 gnss receiver with two antennas for unmatched heading and position accuracy.   extreme flexibility for high demanding applications    

The DLx-MUXDIAG-II is a compact data logger which is particularly well suited to "on road" applications It is used to log the data flowing simultaneously on 1 CAN High Speed or Low Speed link, 1 CAN HS link, 2 ISO9141 links, 2 LIN links and on 2 ANA/binary inputs. Supplied with a memory capacity of 16GB (expandable), a wired remote control and the Exxotest Data Logger Control app for Windows OS, used to configure the data logging and restoral sequences. The range of pinout options on the 16-channel, "OBD" SAE J1962 connector, controlled by the allocation of the non-standardized channels, is covered by several versions of the USB-MUXDIAG-II product, each of which is tailored to the various manufacturers: PEUGEOT, CITROEN, RENAULT and FORD.

The RACELOGIC Brake Temperature Monitoring System measures, logs and displays the surface temperature of the brake disc, providing invaluable information to the test driver whilst on track Technical Specifications Temperature Measurement Range: -20 °C to 950 °C Accuracy: ±2.0% FS for -20° C < Tp < 85° C Field of View (FOV): 60° x 8° Number of Channels: 16 Thermal Time Constant: 2 ms Effective Emissivity: 0.01 – 1.00 (default = 0.55) Spectral Range: 8 to 14 μm Recommended Supply Voltage: 5 to 8 V Supply Current: 30 mA

Country of Origin : UK

Brand Name : RACELOGIC LTD UK

the brake pedal force sensor is designed to measure load applied to the brake, accelerator, and clutch pedals during acceleration, deceleration, and transmission shift events. the units are compact and lightweight, making them easy to install and remove. these sensors also have high overload protection (150% of fs) which prevents damage to the sensor in the event of a vehicle emergency stop. an anti-slip spherical loading surface minimizes the effects of off-axis loading.   features  compact, with a 24.5 mm overall height (27.5 mm when mounted on the pedal mounting bracket)  easy to install and remove  measurement range 0.5 – 150 kg (1470.99 n)

Country of Origin : UK

Type : Brake Pedals

Material : Steel

Application : Bike, Car, VEHICLE BRAKE TESTING

Color : Silver

Feature : Durable

Condition : New

Finishing : Polished

Packaging Type : Box

Warranty : 1 Yr

Picking up alignment and inflation issues as it goes, the easy to use software lets you print a report from the scanner itself or take the captured data back to the office via a memory stick. From there it is your choice how to use data on an individual vehicle or an entire fleet.USB Bar Code Scanner or Magnetic Card Reader for quick vehicle ID entry, PC Based Diagnostic Software Package provides customised report that includes tyre tread profile, tread depths, inflation pressure, customervehicle information and recommended actions.